DIN EN 450-1-2012 Fly ash for concrete - Part 1 Definition specifications and conformity criteria German version EN 450-1 2012《混凝土用飞灰 第1部分 定义、规范和合格标准 德文版本EN 450-1-2012》.pdf

《DIN EN 450-1-2012 Fly ash for concrete - Part 1 Definition specifications and conformity criteria German version EN 450-1 2012《混凝土用飞灰 第1部分 定义、规范和合格标准 德文版本EN 450-1-2012》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 450-1-2012 Fly ash for concrete - Part 1 Definition specifications and conformity criteria German version EN 450-1 2012《混凝土用飞灰 第1部分 定义、规范和合格标准 德文版本EN 450-1-2012》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、October 2012 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 91.100.30!$|“1919889www.din.deDDIN EN 450-1Fly ash for concrete Part 1: Definition, specifications and conformity criteria;English version EN 450-1:2012,English translation of DIN EN 450-1:2012-10Flugasche fr Beton Teil 1: Definition, Anforderungen und Konformittskriterien;Englische Fassung EN 450

3、-1:2012,Englische bersetzung von DIN EN 450-1:2012-10Cendres volantes pour bton Partie 1: Dfinition, spcifications et critres de conformit;Version anglaise EN 450-1:2012,Traduction anglaise de DIN EN 450-1:2012-10SupersedesDIN EN 450-1:2008-05See start of applicationwww.beuth.deDocument comprises pa

4、gesIn case of doubt, the German-language original shall be considered authoritative.3410.12 DIN EN 450-1:2012-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is due to be 1 October 2012. It should be noted that, in Germany, CE conformity mar

5、king of construction products will be permitted once this standard has been listed in the Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard has been prepared by Technical Committee CEN/TC 104 “Concrete and related products” (Secretariat: DIN, Ge

6、rmany). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-07-24 AA Betonzusatzstoffe (CEN/TC 104/WG 4, CEN/TC 104/WG 9, CEN/TC 104/WG 15). The DIN Standards corresponding to the Inte

7、rnational Standards referred to in this document are as follows: ISO 10694 DIN ISO 10694 ISO 29581-2 DIN EN ISO 29581-2 Amendments This standard differs from DIN EN 450-1:2008-05 as follows: a) the permissible content of solid co-combustion materials has been increased; b) the permissible content of

8、 liquid and gaseous co-combustion materials has been increased; c) fixed limits for loss on ignition have been specified; d) the standard has been editorially revised. Previous editions DIN 18990: 2002-09 DIN 18990 Corrigendum 1: 2003-02 DIN EN 450: 1995-01 DIN EN 450-1: 2005-05, 2008-05 DIN EN 450-

9、1:2012-10 3 National Annex NA (informative) Bibliography DIN ISO 10694, Soil quality Determination of organic and total carbon after dry combustion (elementary analysis) DIN EN ISO 29581-2, Methods of testing cement Chemical analysis of cement Part 2: Analysis by X-ray fluorescence DIN EN 450-1:2012

10、-10 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 450-1 August 2012 ICS 91.100.30 Supersedes EN 450-1:2005+A1:2007 English Version Fly ash for concrete Part 1: Definition, specifications and conformity criteria Cendres volantes pour bton Partie 1: Dfinition,

11、 spcifications et critres de conformit Flugasche fr Beton Teil 1: Definition, Anforderungen und Konformittskriterien This European Standard was approved by CEN on 6 July 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eur

12、opean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versio

13、ns (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, B

14、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swi

15、tzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

16、 Ref. No. EN 450-1:2012: E EN 450-1:2012 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 Specific provisions for fly ash from co-combustion74.1 Co-combustion materials 74.2 Establishment of suitability of fly ash from co-combustion .85 Specif

17、ications .85.1 General 85.2 Chemical requirements .85.3 Physical requirements . 105.4 Other requirements. 115.5 Information to be supplied upon request . 126 Packaging and labelling . 127 Sampling 128 Conformity criteria 128.1 General requirements . 128.2 Statistical conformity criteria 148.3 Single

18、 result conformity criteria 17Annex A (normative) Release of dangerous substances and emission of radioactivity . 18Annex B (normative) Determination of the water requirement for Category S fly ash 19Annex C (normative) Determination method on the content of soluble phosphate (expressed as P2O5) 21A

19、nnex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Product Directive. 23Bibliography . 30DIN EN 450-1:2012-10 EN 450-1:2012 (E) 3 Foreword This document (EN 450-1:2012) has been prepared by Technical Committee CEN/TC 104 “Concrete and related pro

20、ducts”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013

21、. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 450-1:2005+A1:2007. This document has been prepared unde

22、r a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is supported by stan

23、dards of the series EN 451 for test methods for the determination of free calcium oxide content and of the fineness by sieving. The main changes with respect to the previous edition are listed below: extension of the permissible content of solid co-combustion materials; extension of the permissible

24、content of liquid and gaseous co-combustion materials; fixed limits for loss on ignition; incorporation of the specifications from EN 450-1+A1:2007; general editorial revision. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are boun

25、d to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal

26、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 450-1:2012-10 EN 450-1:2012 (E) 4 Introduction The use of coal for electricity production results in the generation of large quantities of fly ash. Different types of coal and the type of boiler used in

27、this process produce different fly ashes, such as siliceous, silico-calcareous, or calcareous fly ashes with pozzolanic and/or latent hydraulic properties. All these types of fly ash are used in concrete production in some European countries, based on national experience and tradition. Before use, f

28、ly ash may be subject to processing, for example by classification, selection, sieving, drying, blending, grinding or carbon reduction, to optimize its fineness, reduce its water demand or to improve other properties. Such processed fly ashes may conform to this document to which reference is made i

29、n such case. If they are out of the scope of this document, their suitability for use as Type II additions in concrete according to EN 206-1 may also be established from national standards or provisions or European Technical Approvals valid in the place of use of the concrete and which refer specifi

30、cally to the use of the addition in concrete conforming to EN 206-1. When using fly ashes conforming to this document, it should be noted that, apart from the effect from the pozzolanicity of the fly ash, certain properties of fresh and hardened concrete may be affected. Where relevant, such effects

31、 need to be considered in concrete mix design (see EN 206-1). DIN EN 450-1:2012-10 EN 450-1:2012 (E) 5 1 Scope This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for siliceous fly ash, as defined in 3.2, for use as a type II a

32、ddition for production of concrete conforming to EN 206-1. Fly ash according to this document may also be used in mortars and grouts. Fly ash produced with other types or higher percentages of co-combustion materials than those provided for in Clause 4 is outside the scope of this European Standard.

33、 It is beyond the scope of this European Standard to specify provisions governing the practical application of fly ash in the production of concrete, i.e. requirements concerning composition, mixing, placing, curing etc. of concrete containing fly ash. Regarding such provisions, reference should be

34、made to other European or national standards for concrete, such as EN 206-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated r

35、eferences, the latest edition of the referenced document (including any amendments) applies. EN 196-1:2005, Methods of testing cement Part 1: Determination of strength EN 196-2:2005 Methods of testing cement Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement Part 3: Determinatio

36、n of setting times and soundness EN 196-7, Methods of testing cement Part 7: Methods of taking and preparing samples of cement EN 197-1:2011, Cement Part 1: Composition, specification and conformity criteria for common cements EN 206-1, Concrete Part 1: Specification, performance, production and con

37、formity EN 450-2:2005, Fly ash for concrete Part 2: Conformity evaluation EN 451-1, Method of testing fly ash Part 1: Determination of free calcium oxide content EN 451-2, Method of testing fly ash Part 2: Determination of fineness by wet sieving EN 933-10, Tests for geometrical properties of aggreg

38、ates Part 10: Assessment of fines Grading of filler aggregates (air jet sieving) EN 1015-3:1999, Methods of test for mortar for masonry Part 3: Determination of consistence of fresh mortar (by flow table) EN 1097-7, Tests for mechanical and physical properties of aggregates Part 7: Determination of

39、the particle density of filler Pyknometer method EN ISO 11885, Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICPOES) (ISO 11885) EN 14588:2010, Solid biofuels Terminology, definitions and descriptions ISO 10694, Soil quality Determinati

40、on of organic and total carbon after dry combustion (elementary analysis) ISO 29581-2, Cement Test methods Part 2: Chemical analysis by X-ray fluorescence DIN EN 450-1:2012-10 EN 450-1:2012 (E) 6 3 Terms and definitions For the purpose of this document, the following terms and definitions apply. 3.1

41、 type II addition finely divided inorganic, pozzolanic or latent hydraulic material that may be added to concrete in order to improve certain properties or to achieve special properties Note 1 to entry: See EN 206-1. 3.2 fly ash fine powder of mainly spherical, glassy particles, derived from burning

42、 of pulverised coal, with or without co-combustion materials, which has pozzolanic properties and consists essentially of SiO2and Al2O3 and which: is obtained by electrostatic or mechanical precipitation of dust-like particles from the flue gases of the power stations; and may be processed, for exam

43、ple by classification, selection, sieving, drying, blending, grinding or carbon reduction, or by combination of these processes, in adequate production plants, in which case it may consist of fly ashes from different sources, each conforming to the definition given in this clause Note 1 to entry: Mu

44、nicipal and industrial waste incineration ashes do not conform to the definition given in this clause. 3.3 test cement selected brand of Portland cement of type CEM I, strength class 42,5 or higher, conforming to EN 197-1 to be used for carrying out the tests needed to evaluate conformity to the req

45、uirements of 5.3.2, 5.3.3, 5.3.5 and 5.3.6 3.4 particle density average density of fly ash particles, including voids inside the particles 3.5 activity index ratio (in percent) of the compressive strength of standard mortar bars, prepared with 75 % test cement plus 25 % fly ash by mass, to the compr

46、essive strength of standard mortar bars prepared with 100 % test cement, when tested at the same age 3.6 autocontrol continuous statistical quality control of the fly ash based on the testing of samples taken by the producer or their agent at point(s) of release from the fly ash producing facility 3

47、.7 control period period of production and/or dispatch identified for the evaluation of the autocontrol test results 3.8 characteristic value value of the required property outside of which lies a specified percentage, the percentile Pk, of all the values of the population 3.9 single result limit va

48、lue value of a chemical or physical property which for any single test result in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached DIN EN 450-1:2012-10 EN 450-1:2012 (E) 7 3.10 allowable probability of acceptance CR for a given sampling plan, the allowed probability of acceptance of fly ash with a characteristic value out