DIN EN 1947-2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles German version EN 1947 2014《消防软管 泵和水车用半刚性输水软管和软管组件 德文版本 EN 1947-2014》.pdf

《DIN EN 1947-2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles German version EN 1947 2014《消防软管 泵和水车用半刚性输水软管和软管组件 德文版本 EN 1947-2014》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1947-2014 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles German version EN 1947 2014《消防软管 泵和水车用半刚性输水软管和软管组件 德文版本 EN 1947-2014》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、September 2014Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 13.220.10; 23.040.70!%:“2239193www.din.deDDIN EN 1947Firefighting hoses Semi-rigid delivery hoses and hose assemblies for pumps and vehicles;English version EN 1947:2014,English translation of DIN EN 1947:2014-09Feuerlschschluche Formstabile Druckschluche und Einbnde fr Pumpen und Feuerwehrfahrze

3、uge;Englische Fassung EN 1947:2014,Englische bersetzung von DIN EN 1947:2014-09Tuyaux de lutte contre lincendie Tuyaux de refoulement semi-rigides et flexibles pour pompes et vhicules;Version anglaise EN 1947:2014,Traduction anglaise de DIN EN 1947:2014-09Together withDIN EN 15889:2011-09,supersedes

4、DIN EN 1947:2007-07www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 20 pages08.14 DIN EN 1947:2014-09 2A comma is used as the decimal marker. National foreword This document (EN 1947:2014) has been prepared by Technical Committee CEN/TC

5、192 “Fire and rescue service equipment” (Secretariat: BSI, United Kingdom), Working Group WG 1 “Hoses for firefighting”. The responsible German body involved in its preparation was the Normenausschuss Feuerwehrwesen (DIN Standards Committee Firefighting and Fire Protection), Working Committee NA 031

6、-04-04 AA Schluche und Armaturen SpA zu CEN/TC 192/WG 1 und WG 8. Together with DIN EN 694 and DIN EN 14540, this standard is one of a series of firefighting hose standards that have been simultaneously revised by CEN/TC 192/WG 1 “Hoses for firefighting”. The former Annexes A to G, including the tes

7、t methods, have been deleted and the test methods are now centrally specified in DIN EN 15889, Firefighting hoses Test methods. In the present standard, reference is now made to the relevant annexes in DIN EN 15889. Because this document takes into consideration all hoses currently in use in Europe,

8、 semi-rigid delivery hoses as in this document have been classified into three types, six classes and two categories, so that four possible inside diameters are given. During the next revision of this document, the extent to which such a complex classification is necessary will be reviewed on the ba

9、sis of current market considerations. Type C PN 16 delivery couplings of aluminium alloy intended for use with semi-rigid delivery hoses as in this standard are specified in DIN 14330. This European Standard does not specify a designation. The following designation of firefighting hoses as in this s

10、tandard is recommended: Designation of a semi-rigid hose as in this standard, of category I, type A, class 1, with an inside diameter of 25 mm, which can only be used at temperatures above 20 C, and having a length of 30 m: Hose DIN EN 1947 I A 1 25 20 30 The National Annex NA gives recommendations

11、as to which hoses as in this standard should be used to replace hoses as in the former DIN 14817-1 and DIN 14817-2 (both withdrawn). Amendments This standard differs from DIN EN 1947:2007-07 as follows: a) the former Annexes A to G including the test methods have been deleted; reference is now made

12、to the relevant annexes in DIN EN 15889; b) the standard has been editorially revised. Previous editions DIN 14817: 1959-03 DIN 14817-1: 1963-05, 1977-11, 1983-11, 1990-05, 1991-06 DIN 14817-2: 1964-12, 1977-11 DIN EN 1947: 2002-11, 2007-07 DIN EN 1947:2014-09 3 National Annex NA (informative) Compa

13、rison of hoses as in this European Standard with hoses as in the former DIN 14817-1 and DIN 14817-2 (recommended replacements)Table NA.1 lists which hoses as in this standard (designation as in National Foreword) should be used to replace hoses as in the former national standards DIN 14817-1 and DIN

14、 14817-2 (withdrawn in November 2002) which were used in Germany. Table NA.1 Comparison of hoses as in this European Standard with hoses as in the former DIN 14817-1 and DIN 14817-2 (recommended replacements) Recommended designation of hose as in this document Recommended as replacement for hose as

15、in the former DIN 14817-1 and DIN 14817-2 Hose DIN EN 1947 I A 1 25 20 30 Hose DIN 14817 S 28 Hose DIN EN 1947 I A 1 33 20 30 Hose DIN 14817 S 32 Because of the thermal properties of hoses with a thermoplastic lining and/or cover, FNFW Working Committee NA 031-04-04 AA recommends the use of hoses wi

16、th an elastomer lining and cover. DIN EN 1947:2014-09 4 National Annex NB (informative) Bibliography DIN 14330, Aluminium alloy delivery coupling type C; nominal pressure PN 16 EN 1947July 2014 ICS 13.220.10; 23.040.70 Supersedes EN 1947:2002+A1:2007English VersionFirefighting hoses - Semi-rigid del

17、ivery hoses and hoseassemblies for pumps and vehiclesTuyaux de lutte contre lincendie - Tuyaux de refoulement semi-rigides et flexibles pour pompes et vhicules Feuerlschschluche - Formstabile Druckschluche und Einbnde fr Pumpen und Feuerwehrfahrzeuge This European Standard was approved by CEN on 28

18、May 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt

19、ained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the C

20、EN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irelan

21、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means

22、 reserved worldwide for CEN national Members. Ref. No. EN 1947:2014 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1947:2014 (E) 2 Contents PageForeword 3 Introduction .4 1 Scope 5 2 Normative refer

23、ences 5 3 Terms and definitions .5 4 Classification 6 4.1 General 6 4.2 Classification by types (hose construction) .6 4.3 Classification by class (materials for lining and cover) 7 4.4 Classification by category 7 5 Dimensions, tolerances and maximum mass .7 5.1 Inside diameter and maximum mass .7

24、5.2 Length and tolerances on length .8 5.3 Concentricity 8 6 Performance requirements of finished hose 8 6.1 Hydrostatic requirements .8 6.1.1 Deformation under maximum working pressure 8 6.1.2 Deformation under proof pressure 8 6.1.3 Minimum burst pressure .9 6.1.4 Kink pressure .9 6.2 Adhesion .9

25、6.3 Accelerated ageing 9 6.4 Abrasion resistance 9 6.4.1 Abrasion resistance of class 5 and class 6 hoses .9 6.4.2 Abrasion resistance of classes 1, 2, 3 and 4 hoses 10 6.5 Low temperature flexibility 10 6.6 Hot surface resistance . 10 6.7 Ozone resistance 10 6.8 Bending and crush resistance 10 6.9

26、UV-resistance (xenon arc lamp) 10 6.10 Loss in mass on heating 10 6.11 Deformation under crushing (type C only) 10 7 Frequency of testing 11 8 Marking 11 9 Hose assemblies . 12 Annex A (normative) Test for hose assemblies . 13 A.1 Test piece 13 A.2 Procedure 13 Annex B (normative) Frequencies of tes

27、ting (type test and production test) 14 Annex C (informative) Frequencies of testing (batch test) 15 Bibliography . 16 DIN EN 1947:2014-09EN 1947:2014 (E) 3 ForewordThis document (EN 1947:2014) has been prepared by Technical Committee CEN/TC 192 “Fire and Rescue Service Equipment”, the secretariat o

28、f which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015 and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the

29、possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1947:2002+A1:2007. This revised standard now references EN 15889:2011, Fire-fighting

30、 hoses - Test methods, which includes the test methods formerly in annexes within EN 1947. Requirements for semi-rigid hoses for use with fixed systems are given in EN 694; those for non-percolating layflat hoses for fixed systems are given EN 14540. According to the CEN-CENELEC Internal Regulations

31、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

32、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1947:2014-09EN 1947:2014 (E) 4 Introduction These semi-rigid delivery hoses are used by the fire service and incorporates those h

33、oses used manually to control and extinguish fires. The hose requires to be fitted with couplings to form a hose assembly which is fitted onto reels on fire fighting vehicles. DIN EN 1947:2014-09EN 1947:2014 (E) 5 1 Scope This European Standard specifies the requirements and test methods for semi-ri

34、gid hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). Thi

35、s European Standard applies to hoses for fire-fighting purposes intended for use at ambient conditions within the temperature range 20 C to +60 C. NOTE 1 Hoses for use at ambient temperatures below 20 C can be supplied if they have been tested at the specified lower temperature in accordance with 6.

36、5 and identified by their marking in Clause 8 h). Hoses conforming to this standard are intended for use with fire hose couplings conforming to the relevant national standards for couplings. Requirements are also given for hose assemblies (see Clause 9) where these are fitted by the hose manufacture

37、r. NOTE 2 All pressures are expressed in megapascals. 1 MPa = 10 bar. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated referenc

38、es, the latest edition of the referenced document (including any amendments) applies. EN 15889:2011, Fire-fighting hoses - Test methods EN ISO 176:2005, Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176:2005) EN ISO 1307, Rubber and plastics hoses - Hose sizes, mini

39、mum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) EN ISO 1402, Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) EN ISO 4671:2007, Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses

40、 and the lengths of hose assemblies (ISO 4671:2007) EN ISO 7326:2008, Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2006) EN ISO 8033, Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006) EN ISO 8330, Rubber and plast

41、ics hoses and hose assemblies - Vocabulary (ISO 8330:2007) EN ISO 10619-2:2011, Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) 3 Terms and definitions For the purposes of this document the followi

42、ng term and definition apply, together with those for working pressure, proof pressure and burst pressure given in EN ISO 8330. DIN EN 1947:2014-09EN 1947:2014 (E) 6 3.1 semi-rigid hose hose which maintains its round cross-section even when unpressurised 4 Classification 4.1 General All types and cl

43、asses of hose shall be so flexible that they can be rolled and kept on a drum of minimum diameter 200 mm for 12 mm inside diameter, 19 mm inside diameter and 25 mm inside diameter hose and of minimum diameter 280 mm for 33 mm inside diameter hose. Hoses shall be one of two categories distinguished b

44、y the maximum working pressure. Each hose shall be further divided into one of three types distinguished by its construction, and then into six classes distinguished by the materials used for lining and cover. NOTE The hose may be coloured by agreement between the purchaser and the manufacturer. 4.2

45、 Classification by types (hose construction) Type A hoses shall consist of: a) a seamless rubber or plastics lining; b) a textile spiral or braided reinforcement; c) a rubber or plastics cover. Type B hoses shall consist of: d) a seamless rubber or plastics lining; e) a circular woven textile reinfo

46、rcement with a rigid spiral helix; f) an uncovered or rubber or plastics cover. Type C hoses shall consist of: g) a seamless rubber or plastics lining; h) any suitable reinforcement; i) a rubber or plastics cover. NOTE Whilst the construction of types A and C hoses may be similar or even identical,

47、the performance requirements differ for the following: burst and proof pressure, adhesion, hot surface resistance, crush resistance. DIN EN 1947:2014-09EN 1947:2014 (E) 7 4.3 Classification by class (materials for lining and cover) The hose types shall be further subdivided into six classes dependen

48、t on the materials used in the construction in accordance with Table 1. Table 1 Classes and materials Class Lining material Cover material 1 rubber rubber 2 plastics plastics 3 rubber plastics 4 plastics rubber 5 rubber no cover 6 plastics no cover 4.4 Classification by category All hoses shall be d

49、ivided into two categories dependent on the maximum working pressure in accordance with Table 2. Table 2 Maximum working pressure, proof pressure and minimum burst pressure Pressure Category I Category II Mpa Types A and B Types A and B Type C Classes 1 to 6 Classes 1 to 6 Classes 1 to 6 Maximum working pressure 1,5 4,0 4,0 Proof pressure 3,0 6,0 8,0 Minimum burst pressure 4,5 10,0 12,0 EXAMPLE: A type C hose, constructed us