DIN EN 1673-2010 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements German version EN 1673 2000+A1 2009《食品加工机械 带旋转支架烘箱 安全性和卫生要求 德文版本EN 1673-2000+A1-200.pdf

《DIN EN 1673-2010 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements German version EN 1673 2000+A1 2009《食品加工机械 带旋转支架烘箱 安全性和卫生要求 德文版本EN 1673-2000+A1-200.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1673-2010 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements German version EN 1673 2000+A1 2009《食品加工机械 带旋转支架烘箱 安全性和卫生要求 德文版本EN 1673-2000+A1-200.pdf（43页珍藏版）》请在麦多课文档分享上搜索。

1、October 2010 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 67.260; 97.040.20!$kz“1725887www.din.deDDIN EN 1673Food processing machinery Rotary rack ovens Safety and hygiene requirements (includes Amendment A1:2009)English translation of DIN EN 1673:2010-10Nahrungsmittelmaschinen Stikken-Backfen Sicherheits- und Hygieneanforderungen (enthlt nderung A1:2009

3、)Englische bersetzung von DIN EN 1673:2010-10Machines pour les produits alimentaires Fours chariot rotatif Prescriptions relatives la scurit et lhygine (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 1673:2010-10SupersedesDIN EN 1673:2001-02See start of validitywww.beuth.deDocument comprise

4、s pagesIn case of doubt, the German-language original shall be considered authoritative.4310.10 DIN EN 1673:2010-10 2 A comma is used as the decimal marker. Start of validity This standard takes effect on 1 October 2010. National foreword This standard includes safety requirements. This standard has

5、 been prepared by Technical Committee CEN/TC 153 “Machinery intended for use with foodstuffs and feed” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-18-0

6、1 AA Bckereimaschinen of Section Nahrungsmittelmaschinen. Stakeholders were involved in the development of the standard. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/42/EC, and which apply to machines tha

7、t are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus,

8、a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with th

9、e same number. Amendments This standard differs from DIN EN 1673:2001-02 as follows: a) the standard has been brought in line with the new Machinery Directive 2006/42/EC; b) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC”

10、 has been added. Previous editions DIN EN 1673: 2001-02 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1673:2000+A1 December 2009 ICS 67.260; 97.040.20 Supersedes EN 1673:2000English Version Food processing machinery - Rotary rack ovens - Safety and hygiene requirements Machines pour les produ

11、its alimentaires - Fours chariot rotatif - Prescriptions relatives la scurit et lhygine Nahrungsmittelmaschinen - Stikken-Backfen - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 11 June 2000 and includes Amendment 1 approved by CEN on 24 October 2009. CEN member

12、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

13、 to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the

14、 same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga

15、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means re

16、served worldwide for CEN national Members. Ref. No. EN 1673:2000+A1:2009: EEN 1673:2000+A1:2009 (E) 2 Contents Page Foreword 3Introduction .31 Scope 32 Normative references 43 Description .54 !List of significant hazards“ 74.2 Mechanical hazards .74.3 Electrical hazards 84.4 Thermal hazards 84.5 Exp

17、losion and fire hazards .84.6 Hazard from being trapped inside 84.7 Hazard generated by neglecting hygienic design principles 84.8 Hazards generated by neglecting ergonomic principles .85 !Safety and hygiene requirements and/or protective measures“ .85.2 Mechanical hazards .95.3 !Electrical hazards“

18、. 115.4 Thermal hazards . 125.5 Fire hazards due to overheating . 135.6 Hazard from being trapped inside . 135.7 Hygiene requirements 135.8 Hazards generated by neglecting ergonomic principles 146 Verification of the safety and hygiene requirements and/or measures 147 Information for use . 15Annex A

19、 (normative) Principles of design to ensure the cleanability of rotary rack ovens . 17A.1 !Terms and definitions“ 17A.2 Materials of construction . 17A.3 Design 18Annex B (normative) Noise test code - Grade 2 of accuracy. 35B.1 !Terms and definitions“ 35B.2 Installation and mounting conditions . 35B

20、.3 Operating conditions 35B.4 Measurements . 35B.5 Emission sound pressure level determination 35B.6 Sound power level determination . 36B.7 Measurement uncertainties . 36B.8 Information to be recorded 36B.9 Information to be reported . 36B.10 Declaration and verification of noise emission values .

21、37Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“ 39Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 40!Bibliography“ 41DIN EN 1673:2010-10 EN 16

22、73:2000+A1:2009 (E) 3 Foreword This document (EN 1673:2000+A1:2009) has been prepared by Technical Committee CEN/TC 153 “Machinery intended for use with foodstuffs and feed“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by p

23、ublication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall

24、 not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 24 October 2009. This document supersedes EN 1673:2000. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This European Sta

25、ndard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Acco

26、rding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

27、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Introduction !This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extend to which hazards, hazar

28、dous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards,

29、for machines that have been designed and built according to the provisions of this type C standard.“ 1 Scope This standard specifies safety and hygiene requirements for the design and manufacture of rotary rack ovens with one or more rotary racks. DIN EN 1673:2010-10 EN 1673:2000+A1:2009 (E) 4 These

30、 ovens are used in the food industry and shops (bakeries, pastry-making, etc.) for the batch baking of foodstuffs containing flour, water and other additives. This standard applies to ovens used only for food products except for those containing volatile flammable ingredients. The control of the hum

31、idity of the air in the baking chamber is by the production and introduction of steam around normal atmospheric pressure. The following machines are excluded: experimental and testing machines under development by the manufacturer; domestic appliances. !This standard covers the technical safety requ

32、irements for the transport, installation, operation, cleaning and maintenance of these machines (see 5.2 and 5.3 of EN 12100-1:2003).“ This document deals with all significant hazards, hazardous situations and events relevant to rotary rack ovens, when they are used as intended and under conditions

33、of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not considered to be a significant hazard. This does not mean that the manufacturer is absolved from reducing noise and making a noise declaration. Therefore a noise test code is given in Annex B.“ The hazards fr

34、om the use of gaseous fuel by gas appliances are not covered by this standard. !This standard is not applicable to rotary rack ovens which are manufactured before the date of its publication as EN.“ 2 !Normative references The following referenced documents are indispensable for the application of t

35、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs EN 614-1:2006, Safe

36、ty of machinery Ergonomic design principles Part 1: Terminology and general principles EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: Gener

37、al principles for design EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1672-2:2005, Food processing machinery Basic concepts Part 2: Hygiene requirements EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part

38、1: General requirements (IEC 60204:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) DIN EN 1673:2010-10 EN 1673:2000+A1:2009 (E) 5 EN ISO 3743-1:1995, Acoustics Determination of sound levels of noise sources Engineering methods for small, movable

39、 sources in reverberant fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) EN ISO 3744:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 4

40、287:1998, Geometrical Product Specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287:1997) EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:1995, Acousti

41、cs Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11688-1:1998, Acoustics Recommended practice for the design of

42、low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12001:1996, Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code (ISO 12001:1996) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for

43、 design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13732-1:2008, Ergonomics of the thermal environment Methods for the assessment of human resp

44、onses to contact with surfaces Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13849-1:2008, Safety of machinery Safety related parts of control systems Part 1: General principles for design (ISO 13849-1:2006)“ 3 Description A rotary rack oven usually consists of the following parts (see figure.1): a

45、) container built with insulated panels; b) baking chamber with access door; c) heat production unit; d) hot air circulation system; e) rack and trays; f) drive unit for rack rotation; g) steam generator; h) steam extractor; i) control panel; DIN EN 1673:2010-10 EN 1673:2000+A1:2009 (E) 6 j) miscell

46、aneous devices (e.g. combustion product flue where gas or fuel fired); k) device to hold the removable rotary racks. Figure 1 Parts of a rotary rack oven DIN EN 1673:2010-10 EN 1673:2000+A1:2009 (E) 7 4 !List of significant hazards 4.1 General This clause contains all the significant hazards, hazard

47、ous situations and events, as far as they are dealt with in this Standard, identified by risk assessment as significant for this type of machinery, and which require action to eliminate or reduce the risk.“ 4.2 Mechanical hazards The significant mechanical hazards are: shearing hazard; trapping haza

48、rd; impact hazard; loss of stability. The example in figure 2 shows the danger zones: Zone 1: rotation of the rack inside the oven hazards of shearing, trapping, impact; Zone 2: drive mechanism hazards of shearing, trapping; Zone 3: space between the rack and the door frame hazards of shearing, trap

49、ping, impact; All zones: sharp corners and edges on touchable parts hazards of cutting. Figure 2 Danger zones of a rotary rack oven DIN EN 1673:2010-10 EN 1673:2000+A1:2009 (E) 8 There is also a hazard relating to loss of stability of the trays and of the rack during rotation and on entering the baking chamber. 4.3 Electri