DIN EN 15600-1-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - .pdf

《DIN EN 15600-1-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - .pdf》由会员分享，可在线阅读，更多相关《DIN EN 15600-1-2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - .pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、December 2010 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 91.100.60!$lI7“1733820www.din.deDDIN EN 15600-1Thermal insulation products for building equipment and industrialinstallations In-situ thermal insulation formed from exfoliated vermiculite (EV)products Part 1: Specification for bonded and loose-fill products beforeinstallationEnglish translation o

3、f DIN EN 15600-1:2010-12Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnischeAnlagen in der Industrie An der Verwendungsstelle hergestellte Wrmedmmung mit Produkten aus expandiertemVermiculit (EV) Teil 1: Spezifikation fr gebundene und Schttprodukte vor dem EinbauEnglische berset

4、zung von DIN EN 15600-1:2010-12Produits isolants thermiques pour lquipement du btiment et les installationsindustrielles Isolation thermique forme en place base de granulats lgers de vermiculite exfolie(EV) Partie 1: Spcification de produits lis et en vrac avant mise en oeuvreTraduction anglaise de

5、DIN EN 15600-1:2010-12See start of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.2711.10 DIN EN 15600-1:2010-12 A comma is used as the decimal marker. Start of application The start of application of this standard is d

6、ue to be 1 January 2011. It should be noted that, in Germany, CE conformity marking of construction products conforming to this standard will be permitted once the standard has been listed in the Bundesanzeiger (German Federal Gazette) and from the date given therein. National foreword This standard

7、 has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany), Working Group WG 15 “In situ formed insulation products” (lead-management: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschus

8、s Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebs-technische Anlagen in Gebuden und in der Industrie. 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15600-1 July 2010 ICS 91.100.60 English Version Thermal insulation produ

9、cts for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation Produits isolants thermiques pour lquipement du btiment et les installations industriel

10、les - Isolation thermique forme en place base de granulats lgers de vermiculite exfolie (EV) - Partie 1: Spcification de produits lis et en vrac avant mise en oeuvre Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergeste

11、llte Wrmedmmung mit Produkten aus expandiertem Vermiculit (EV) - Teil 1: Spezifikation fr gebundene und Schttprodukte vor dem Einbau This European Standard was approved by CEN on 6 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

12、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official

13、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

14、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN CO

15、MMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15600-1:2010: EEN 15600-1:2010 (E)

16、2 Contents Page Foreword 41 Scope 52 Normative references 53 Terms and Definitions, Symbols and Abbreviations .63.1 Terms and Definitions .63.2 Symbols and Abbreviations .73.2.1 Symbols used in this standard .73.2.2 Abbreviations used in this standard74 Requirements .74.1 General 74.2 For all applic

17、ations 74.2.1 Thermal resistance and thermal conductivity 74.2.2 Loose bulk density 84.2.3 Particle size 84.2.4 Reaction to fire .84.2.5 Durability characteristics 94.3 For specific applications .94.3.1 General 94.3.2 Maximum service temperature .94.3.3 Minimum service temperature 94.3.4 Crushing re

18、sistance 94.3.5 Water vapour permeability . 104.3.6 Release of dangerous substances 104.3.7 Continuous glowing combustion 105 Test methods . 105.1 Sampling 105.2 Conditioning 105.3 Testing . 105.3.1 General . 105.3.2 Thermal conductivity 116 Designation Code . 117 Evaluation of conformity 128 Markin

19、g and labelling . 12Annex A (normative) Factory production control . 14Annex B (normative) Preparation of the test specimens to measure thermal conductivity 15Annex C (normative) Special conditions to be used for the determination of organic content 16C.1 Principle . 16C.2 Apparatus 16C.3 Procedure

20、16C.4 Calculation and expression of results 16C.5 Test report . 16Annex D (normative) Determination of maximum service temperature . 17D.1 Principle . 17D.2 Apparatus 17D.3 Procedure 17D.4 Test report . 18DIN EN 15600-1:2010-12 EN 15600-1:2010 (E) 3 Annex ZA (informative) Clauses of this European St

21、andard addressing the provisions of the EU Construction Products Directive . 19ZA.1 Scope and relevant characteristics . 19ZA.2 Procedures for attestation of conformity of loose-fill exfoliated vermiculite products . 21ZA.2.1 Systems of attestation of conformity 21ZA.2.2 EC declaration of conformity

22、 . 22ZA.3 CE Marking and labelling 23Bibliography 25DIN EN 15600-1:2010-12 EN 15600-1:2010 (E) 4 Foreword This document (EN 15600-1:2010) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard sh

23、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this do

24、cument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirem

25、ents of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of two parts which form a package. The first part, which is the harmonised part satisfying the mandate, the CPD and is the basis for t

26、he CE marking, covers the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. This document contains five Annexes: Annex A (normative) - Factory production control Annex B (normative) - Preparation of test

27、specimens to measure thermal conductivity Annex C (normative) - Special conditions to be used for the determination of organic content Annex D (normative) - Determination of maximum service temperature Annex ZA (informative) - Clauses of this European Standard addressing the provisions of the EU Con

28、struction Products Directive This European Standard is one of a series for polyurethane/polyisocyanurate, expanded perlite and exfoliated vermiculite in-situ formed insulation products used in building equipment and industrial installations, but this standard may be used in other areas where appropr

29、iate. EN 14317-1 covers the use of exfoliated vermiculite in buildings. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC In

30、ternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

31、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 15600-1:2010-12 EN 15600-1:2010 (E) 5 1 Scope This European Standard specifies the requirements for exfoliated vermiculite products which are used for the the

32、rmal insulation of building equipment and industrial installations with an operating temperature in the range of approximately 40 C to + 1050 C. This European Standard specifies the requirements for the four types of exfoliated vermiculite products Vermiculite Aggregate (EVA), Coated Vermiculite (EV

33、C) Hydrophobic Vermiculite (EVH) and Premixed Vermiculite (EVM), containing less than 1 % by mass organic material as determined by Annex C. This European Standard is a specification for the insulation products before installation. This European Standard describes the product characteristics and inc

34、ludes procedures for testing, evaluation of conformity, marking and labelling. This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to

35、 be found in regulations or non-conflicting standards. This European Standard does not cover factory made insulation products of formed shapes and boards made with exfoliated vermiculite, and does not cover products intended to be used for the insulation of buildings. The products covered by this st

36、andard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the installations in these respects when installed for their primary insulation intended use. 2 Normative references The following referenced docum

37、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-1, Tests for general properties of aggregates Part 1: Methods for sampli

38、ng EN 932-2, Tests for general properties of aggregates Part 2: Methods for reducing laboratory samples EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method. EN 993-14, Methods of testing dense shaped refractory products Part 14:

39、 Determination of thermal conductivity by the hot-wire (cross-array) method EN 1097-3, Tests for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids EN 12086, Thermal insulating products for building application Determination of water vapour transmi

40、ssion properties EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 13055-1, Lightweight aggregates Part 1: Lightweight aggregates for concret

41、e, mortar and grout EN 13055-2, Lightweight aggregates Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications DIN EN 15600-1:2010-12 EN 15600-1:2010 (E) 6 EN 13172, Thermal insulating products Evaluation of conformity EN 13820, Thermal in

42、sulating materials for building applications Determination of organic content EN 14706, Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature EN ISO 13787, Thermal insulation products for building equipment and industrial install

43、ations Determination of declared thermal conductivity (ISO 13787:2003) 3 Terms and Definitions, Symbols and Abbreviations For the purposes of this document, the following terms and definitions apply. 3.1 Terms and Definitions 3.1.1 exfoliated vermiculite insulation material which results from expand

44、ing or exfoliating a natural micaceous mineral by heating EN ISO 9229 3.1.2 vermiculite aggregate exfoliated vermiculite with no treatment or surface coating, used as a loose insulation in cavities 3.1.3 coated vermiculite exfoliated vermiculite which has a coating 3.1.4 hydrophobic vermiculite exfo

45、liated vermiculite which is treated to give specific hydrophobic properties and used where moisture or water repellency is required 3.1.5 premixed vermiculite exfoliated vermiculite premixed with binders to form bonded materials in end use applications 3.1.6 level given value which is the upper or l

46、ower limit of requirement, where the level is given by the declared value of the characteristic concerned 3.1.7 class combination of two levels of the same property between which the performance shall fall, where the level is given by the declared value of the characteristic concerned DIN EN 15600-1

47、:2010-12 EN 15600-1:2010 (E) 7 3.2 Symbols and Abbreviations 3.2.1 Symbols used in this standard Dis the declared thermal conductivity W/(mK) is the water vapour diffusion resistance factor CR is the symbol of the declared value for crushing resistance LD is the symbol of the declared value for loos

48、e bulk density PS is the symbol of the declared particle size ST(+) is the symbol of the declared maximum service temperature ST(-) is the symbol of the declared minimum service temperature 3.2.2 Abbreviations used in this standard EV is exfoliated vermiculite as defined in 3.1.1 EVA is vermiculite

49、aggregate as defined in 3.1.2 EVC is coated vermiculite as defined in 3.1.2 EVH is hydrophobic vermiculite as defined in 3.1.2 EVM is premixed vermiculite as defined in 3.1.2 ITT is initial type testing. 4 Requirements 4.1 General Product properties shall be assessed in accordance with Clause 5. To comply with this standard, products shall meet the requirements of 4.2 and 4.3 as appropria