DIN EN 15534-4-2014 en 7435 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Par.pdf

《DIN EN 15534-4-2014 en 7435 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Par.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15534-4-2014 en 7435 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Par.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、April 2014 Translation by DIN-Sprachendienst.English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、79.080; 83.140.99!%1A3“2143016www.din.deDDIN EN 15534-4Composites made from cellulose-based materials and thermoplastics(usually called wood-polymer composites (WPC) or natural fibrecomposites (NFC) Part 4: Specifications for decking profiles and tiles;English version EN 15534-4:2014,English transla

3、tion of DIN EN 15534-4:2014-04Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (blicherweiseHolz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) Teil 4: Anforderungen an Profile und Formteile fr Bodenbelge;Englische Fassung EN 15534-4:2014,Englische bers

4、etzung von DIN EN 15534-4:2014-04Composites base de matires cellulosiques et de thermoplastiques (communmentappels composites bois-polymres (WPC) ou composites fibres doriginenaturelle (NFC) Partie 4: Spcifications relatives aux lames et dalles pour platelage;Version anglaise EN 15534-4:2014,Traduct

5、ion anglaise de DIN EN 15534-4:2014-04Together with DIN EN15534-5:2014-04,supersedesDIN CEN/TS 15534-3:2007-08www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 16 pages 03.14 DIN EN 15534-4:2014-04 2 A comma is used as the decimal marker.

6、 National foreword This document (EN 15534-4:2014) has been prepared by Technical Committee CEN/TC 249 “Plastics” (Secretariat: NBN, Belgium). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Working C

7、ommittee NA 042-02-15-01 AK Spiegel-ausschuss zu CEN/TC 249/WG 13 Holz-Polymer-Werkstoffe (WPC). Amendments This standard differs from DIN CEN/TS 15534-3:2007-08 as follows: a) the prestandard status has been changed to that of a full standard; b) the title of the standard has been modified; c) in a

8、ddition to wood, other cellulose-based materials have been included; d) the scope has been confined to decking profiles and tiles; e) test parameters and requirements have been specified for specific characteristics; f) Clause 5 “Marking” has been added; g) Annex A “Minimum frequencies of testing fo

9、r factory production control purposes” has been added. Previous editions DIN CEN/TS 15534-3: 2007-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15534-4 January 2014 ICS 79.080; 83.140.99 Supersedes CEN/TS 15534-3:2007English Version Composites made from cellulose-based materials and thermo

10、plastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) - Part 4: Specifications for decking profiles and tiles Composites base de matires cellulosiques et de thermoplastiques (communment appels composites bois-polymres (WPC) ou composites fibres dorigine naturelle (

11、NFC) - Partie 4: Spcifications relatives aux lames et dalles pour platelage Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (blicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) -Teil 4: Anforderungen an Profile und Formteile fr Bodenbelge

12、This European Standard was approved by CEN on 9 November 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref

13、erences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C

14、EN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedon

15、ia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI

16、SCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15534-4:2014 EEN 15534-4:2014(E)2 Contents Page Foreword 3 1 Scope 5 2 Normative referen

17、ces 5 3 Terms and definitions .5 4 Requirements .5 4.1 General 5 4.2 Material .6 4.3 Appearance 6 4.4 Physical characteristics 6 4.5 Mechanical characteristics .7 4.5.1 Falling mass impact resistance 7 4.5.2 Flexural properties.8 4.5.3 Creep behaviour.8 4.5.4 Durability of products against biologica

18、l agents .9 4.5.5 Durability of the products against ageing and moisture .9 4.5.6 Thermal properties . 10 4.5.7 Additional characteristics 11 5 Marking 12 Annex A (informative) Minimum frequencies of testing for factory production control purposes . 13 Bibliography . 14 DIN EN 15534-4:2014-04 EN 155

19、34-4:2014(E)3 Foreword This document (EN 15534-4:2014) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

20、e latest by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

21、uch patent rights. This document together with EN 15534-5:2014 supersedes CEN/TS 15534-3:2007. The significant changes that have been made since the previous edition are the following: splitting into Parts 4 and 5 of CEN/TS 15534-3:2007; change of the status from Technical Specification to European

22、Standard; complete technical review of the document; change of the Scope from characterization to specification of the products. EN 15534 consists of the following parts: EN 15534-1, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or na

23、tural fibre composites (NFC) Part 1: Test methods for characterization of compounds and products prEN 15534-2, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 2: Characterization of compounds1) EN

24、15534-4, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 4: Specifications for decking profiles and tiles EN 15534-5, Composites made from cellulose-based materials and thermoplastics (usually call

25、ed wood-polymer composites (WPC) or natural fibre composites (NFC) Part 5: Specifications for cladding profiles and tiles prEN 15534-6, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 6: Specificat

26、ions for fencing profiles and systems1) prEN 15534-7, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 7: Specifications for general purpose profiles in external applications1)1) In preparation. DIN

27、EN 15534-4:2014-04EN 15534-4:2014(E)4 According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugos

28、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DINEN 15534-4:2014-04EN 15534-4:2014 (E) 5 1 Scop

29、e This European Standard specifies the characteristics of decking profiles and tiles made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC), for external use. This part of EN 15534 is applicable to extruded profiles but

30、also to tiles manufactured by other plastics processing techniques, e.g. injection moulding. It is not applicable to kits (i.e. support rail profiles, cover strip profiles and hardware) which are out of the scope of this part of EN 15534. EN 15534-1 specifies the test methods relevant to this part o

31、f EN 15534. NOTE For editorial reasons, in EN 15534 the abbreviation “WPC” is used for “composites made from cellulose-based materials and thermoplastics”. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its a

32、pplication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 927-6, Paints and varnishes Coating materials and coating systems for exterior wood Part 6: Exposure of wood coatings to arti

33、ficial weathering using fluorescent UV lamps and water EN 15534-1:2014, Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC) Part 1: Test methods for characterisation of compounds and products EN 16472, Plas

34、tics Method for artificial accelerated photoageing using medium pressure mercury vapour lamps EN ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO 4892-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN

35、15534-1:2014 apply. 4 Requirements 4.1 General Initial type testing shall be performed to demonstrate compliance with the requirements specified in Clause 4 of this part of EN 15534. The tests according to 4.5.7 shall be carried out if the performance is declared by the manufacturer. Initial type te

36、sting shall be repeated, whenever a change occurs in the composition of the product, its geometry or in the production process. In case of a minor change, only the properties which could be influenced by this change shall be tested. NOTE Minimum frequencies of testing for factory production control

37、purposes are given in Annex A. DINEN 15534-4:2014-04EN 15534-4:2014 (E) 6 4.2 Material The base polymer, from which the material is produced, and the type and content of cellulose-based material shall be declared by the manufacturer. Reprocessable and/or recyclable materials may be used for manufact

38、uring profiles and tiles provided that they satisfy to the provisions of this part of EN 15534. WPC materials are recyclable materials which can be treated in a material recovery process intended to save resources while minimizing harmful emissions into air, water and soil as well as their impacts o

39、n human health. NOTE A scheme for the characterization of plastics waste is given in EN 15347 2 and guidelines for the recovery and recycling are given in ISO 15270 3. 4.3 Appearance For production control purposes, the manufacturer shall compare three samples drawn at random from the same profile/t

40、ile production batch with a control sample, under the illumination conditions defined in EN 15534-1:2014, 6.1. The control samples shall be stored in a dark room and renewed every six months. If a control sample is put in contact with water, it shall be renewed immediately. 4.4 Physical characterist

41、ics When tested in accordance with the test methods as specified in Table 1, using the parameters indicated, the profiles/tiles, as delivered to the customer, shall have characteristics conforming to the requirements given in Table 1. DIN EN 15534-4:2014-04 EN 15534-4:2014 (E) 7 Table 1 Physical cha

42、racteristics Characteristic Requirements Test method Number of test specimens Slipperiness aa) Pendulum test Pendulum value 36 EN 155341:2014, 6.4.2 5 specimens/face/direction bOR b) Inclination plan test Class C (24) EN 155341:2014, 6.4.3 1 specimen/face/direction bOR c) Dynamic coefficient of fric

43、tion (dry condition) 0,43 EN 155341:2014, 6.4.4 1 specimen/face/direction bLinear mass (applicable to profiles) Individual values 95 % declared value by the manufacturer. The linear mass and tolerances shall be declared by the manufacturer. EN 155341:2014, 6.5 3 specimens Thickness, width and length

44、 (applicable to profiles) The relevant dimensional values and their tolerances shall be declared by the manufacturer. EN 155341:2014, 6.6.2 3 specimens Deviation from straightness (applicable to profiles) The deviation of straightness and its tolerance shall be declared by the manufacturer. EN 15534

45、1:2014, 6.6.3 3 specimens Cupping The cupping value and its tolerance shall be declared by the manufacturer. EN 155341:2014, 6.6.4 3 specimens aThe choice of the method for assessing the slipperiness is under the responsibility of the manufacturer taking into account the relevant national regulation

46、s according to the field of use of the profiles/tiles, if existing. The method used for assessing the slipperiness shall be declared by the manufacturer. bIn both directions and on both faces of the profile/tile, if relevant. 4.5 Mechanical characteristics 4.5.1 Falling mass impact resistance When t

47、ested in accordance with the test methods as specified in Table 2, using the parameters indicated, the profiles/tiles, as delivered to the customer, shall have characteristic conforming to the requirements given in Table 2. DINEN 15534-4:2014-04EN 15534-4:2014 (E) 8 Table 2 Falling mass impact resis

48、tance Requirements Test parameters Test method Number of test specimens Hollow profiles None of 10 test specimens shall show a failure with a crack length 10 mm or a depth of residual indentation 0,5 mm. In case of one failure, 10 additional test specimens shall be tested and no failure with a crack length 10 mm or a depth of residual indentation 0,5 mm shall occur. H: (700 5) mm Ms: (1 000 5) g EN 155341:2014, 7.1.2.1 10 specimens/faceaSolid