DIN EN 15501-2016 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Sp.pdf

《DIN EN 15501-2016 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Sp.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15501-2016 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Sp.pdf（45页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N(R“2430547www.din.deDI

2、N EN 15501Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification;English version EN 15501:2015,English translation of DIN EN 15501:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung

3、 und fr betriebstechnische Anlagen in der Industrie Werkmig hergestellte Produkte aus Blhperlit (EP) und expandiertem Vermiculit (EV) Spezifikation;Englische Fassung EN 15501:2015,Englische bersetzung von DIN EN 15501:2016-03Produits isolants thermiques pour lquipement du btiment et les installation

4、s industrielles Produits manufacturs en perlite expanse (EP) et base de vermiculite exfolie (EV) Spcification;Version anglaise EN 15501:2015,Traduction anglaise de DIN EN 15501:2016-03SupersedesDIN EN 15501:2013-07See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doub

5、t, the German-language original shall be considered authoritative.Document comprises 45 pages 03.16 DIN EN 15501:2016-03 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking o

6、f construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European

7、Commission or of the relevant building authority. The standard which this document replaces, DIN EN 15501:2013-07, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (Ge

8、rman Federal Gazette). National foreword This document (EN 15501:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards C

9、ommittee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebstechnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 15501:2013-07 as follows: a) the German title has been modified; b) an addition h

10、as been made to the foreword; c) 3.2.2 has been amended; d) a new Subclause 4.3.8 has been added; e) 5.3.2 has been amended; f) Clause 7 has been amended; g) Clause 8 has been amended; h) Annex A has been amended; i) a new version of Annex ZA has been added. Previous editions DIN EN 15501: 2013-07 E

11、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15501 December 2015 ICS 91.100.60 Supersedes EN 15501:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification

12、Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en perlite expanse (EP) et base de vermiculite exfolie (EV) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig he

13、rgestellte Produkte aus Blhperlit (EP) und expandiertem Vermiculit (EV) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status

14、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Germ

15、an). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia

16、, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnite

17、d Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1

18、5501:2015 EEN 15501:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 9 3.2 S

19、ymbols, units and abbreviated terms 9 3.2.1 Symbols and units . 9 3.2.2 Abbreviated terms . 10 4 Requirements 11 4.1 General . 11 4.2 For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire 12 4.2.5 Durability c

20、haracteristics . 13 4.3 For specific applications 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 14 4.3.4 Compressive stress or compressive strength 14 4.3.5 Trace quantities of water soluble ions and the pH value 14 4.3.6 Water vapour diffusion resi

21、stance 15 4.3.7 Short-term water absorption by partial immersion . 15 4.3.8 Release of dangerous substances . 15 4.3.9 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 16 5.3 Testing 16 5.3.1 General . 16 5.3.2 Thermal conductivity . 18 5.3.3 Maximum service te

22、mperature . 18 5.3.4 Reaction to fire 19 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 20 7.3 Factory Production Control (FPC) 20 8 Marking and labelling . 20 Annex A (normative) Factory productio

23、n control . 21 DIN EN 15501:2016-03 EN 15501:2015 (E) 3 Annex B (normative) Special conditions for the determination of organic content . 23 B.1 Principle . 23 B.2 Apparatus 23 B.3 Procedure 23 B.4 Calculation and expression of results . 23 B.5 Test report 23 Annex C (informative) Preparation of the

24、 test specimens to measure thermal conductivity . 24 C.1 Preparation of the test specimens to measure thermal conductivity . 24 C.2 Ageing . 24 Annex D (informative) Product specific details for mounting and fixing for reaction to fire testing . 25 Annex E (informative) Additional properties 30 E.1

25、General . 30 E.2 Coefficient of thermal expansion 30 E.3 Apparent and true porosity 30 E.4 Air flow resistance 30 E.5 Creep in compression 30 E.6 Permeability to gases 30 E.7 Bending strength 30 E.8 Apparent density 30 Annex ZA (informative) Clauses of this European Standard addressing the provision

26、s of the EU Construction Products Regulation . 32 ZA.1 Scope and relevant characteristics 32 ZA.2 Procedures for AVCP of factory made expanded perlite (EP) and exfoliated vermiculite (EV) products . 34 ZA.3 CE Marking and labelling . 41 Bibliography . 43 DIN EN 15501:2016-03 EN 15501:2015 (E) 4 Euro

27、pean foreword This document (EN 15501:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

28、by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo

29、r identifying any or all such patent rights. This document supersedes EN 15501:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made

30、 in this new edition of EN 15501 are the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.8; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mand

31、ate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible auth

32、orities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational condition

33、s of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Special conditions to be used for the determination of organic content; Annex C (i

34、nformative), Preparation of the test specimens to measure thermal conductivity; DIN EN 15501:2016-03 EN 15501:2015 (E) 5 Annex D (informative), Product specific details for mounting and fixing for reaction to fire testing; NOTE This annex will be transferred to Annex A of EN 15715 when this document

35、 is being revised. Annex E (informative), Additional properties; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulatio

36、n products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. Other standards in the series include the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which co

37、me within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeri

38、c foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicat

39、e (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid pol

40、yurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and ind

41、ustrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industri

42、al installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cro

43、atia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

44、the United Kingdom. DIN EN 15501:2016-03 EN 15501:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made expanded perlite and exfoliated vermiculite products which are used for the thermal insulation of building equipment and industrial installations with an operating

45、temperature in the range of approximately 0 C to + 1 100 C. Expanded perlite and exfoliated vermiculite products can be used below 0 C but special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heed

46、ed in all cases. The products are manufactured in the form of boards, pipe sections, segments, prefabricated ware and special ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this

47、European Standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that is achieved by a product to demonst

48、rate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are not covered by this European Standard. This European Standard doe

49、s not cover products intended to be used for the insulation of the building structure. The European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact transmission noise index. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,