DIN EN 15032-2008 Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid(includes Amendment A1 2008) English version of DIN EN 15032 2008-06《游泳池水处理用化学试剂 三氯.pdf

《DIN EN 15032-2008 Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid(includes Amendment A1 2008) English version of DIN EN 15032 2008-06《游泳池水处理用化学试剂 三氯.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15032-2008 Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid(includes Amendment A1 2008) English version of DIN EN 15032 2008-06《游泳池水处理用化学试剂 三氯.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、June 2008DEUTSCHE NORM English price group 9No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 71.100.80!$Nh“1439369www.d

2、in.deDDIN EN 15032Chemicals used for treatment of swimming pool water Trichloroisocyanuric acid (includes Amendment A1:2008)English version of DIN EN 15032:2008-06Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser Trichlorisocyanursure (enthlt nderung A1:2008)Englische Fassung DIN EN 15032:

3、2008-06SupersedesDIN EN 15032:2006-09www.beuth.deDocument comprises 14 pagesDIN EN 15032:2008-06 2 National foreword This standard has been prepared by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenau

4、sschuss Wasserwesen (Water Practice Standards Committee), Technical Committee NA 119-04-02 AA Wasseraufbereitung. Amendments This standard differs from DIN EN 15032:2006-09 as follows: a) A warning relating to the safe handling of the product has been included. Previous editions DIN EN 15032: 2006-0

5、9 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15032:2006+A1 February 2008 ICS 71.100.80 Supersedes EN 15032:2006 English Version Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid Produits chimiques utiliss pour le traitement de leau des piscines - Acide trichlo

6、roisocyanurique Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Trichlorisocyanursure This European Standard was approved by CEN on 5 June 2006 and includes Amendment 1 approved by CEN on 11 January 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

7、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Stand

8、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national sta

9、ndards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United K

10、ingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15032:2006+A1:

11、2008: EEN 15032:2006+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative reference 5 3 Description .5 4 Purity criteria5 5 Test methods6 6 Labelling - Transportation - Storage6 Bibliography 12 DIN EN 15032:2008-06 Annex B (normative) General rules relating to safety11 Annex A

12、 (informative) General information on trichloroisocyanuric acid.9 EN 15032:2006+A1:2008 (E) 3 Foreword This document (EN 15032:2006+A1:2008) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This document shall be given the status of a nat

13、ional standard, either by publication of an identical text or by endorsement, at the latest by August 2008 and conflicting national standards shall be withdrawn at the latest by August 2008. This document includes Amendment 1 approved by CEN on 2008-01-11. This document supersedes EN 15032:2006. The

14、 start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Cze

15、ch Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 4

16、 Introduction In respect of potential adverse effects on the quality of water for swimming pools caused by the product covered by this European Standard: 1) this European Standard provides no information as to whether the product may be used without restriction in any of the Member States of the EU

17、or EFTA; 2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force. NOTE Conformity with the European Standard does not confer or imply acceptance or approval of

18、 the product in any of the Member States of the EU or EFTA. The use of the product covered by this European Standard is subject to regulation or control by National Authorities. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 5 1 Scope This European Standard is applicable to trichloroisocyanuric acid

19、 used directly or used to prepare commercial formulations for disinfecting swimming pool water. It describes the characteristics of trichloroisocyanuric acid and specifies the requirements and the corresponding test methods for trichloroisocyanuric acid. It gives information on its use for treating

20、swimming pool water and determines the rules relating to safe handling and use (see Annex B). 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edit

21、ion of the referenced document (including any amendments) applies. EN 12933, Chemicals used for treatment of water intended for human consumption Chemicals for emergency use Trichloroisocyanuric acid 3 Description The identification, commercial form, physical properties and chemical properties are g

22、iven in the relevant sub-clauses of EN 12933. 4 Purity criteria 4.1 General This European Standard specifies the minimum purity requirements for trichloroisocyanuric acid used for the treating swimming pool water. Limits are given for impurities commonly present in this product and depending on the

23、raw material and the manufacturing process, other impurities may be present and if so, the user and when necessary, the relevant authorities shall be notified. NOTE Users of the product should check the national regulations in order to clarify whether it is of appropriate purity for treating swimmin

24、g pool water, taking into account water quality, required dosage, contents of other impurities and additives used in the product not stated in this product standard. Limits have been given for impurities and chemical parameters where they are likely to be present in significant quantities from the c

25、urrent production process and raw materials. If the production process or raw materials lead to the presence of significant quantities of other impure by-products or additives being present, the user shall be notified. 4.2 Composition of commercial product The commercial product shall contain at lea

26、st a mass fraction of 89 % of available chlorine as calculated in accordance with the corresponding method given in EN 12933. 4.3 Impurities and main by-products The water content shall be less than a mass fraction of 0,15 % of the product. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 6 4.4 Chemic

27、al parameters The content of arsenic, cadmium, chromium, mercury, nickel, lead, antimony and selenium for the two types of product shall conform to the requirements specified in EN 12933. NOTE Cyanide (CN-), which does not exist in a strong oxidizing medium such as trichloroisocyanuric acid, is not

28、a relevant chemical parameter and as the raw materials used in the manufacturing process are free of pesticides and polycyclic aromatic hydrocarbons, they are not relevant. 5 Test methods The sampling and the analytical methods are those described in EN 12933. 6 Labelling - Transportation - Storage

29、6.1 Means of delivery The product shall be delivered in fibre, polyethylene drums or semi-bulk containers. To ensure the purity of the product, the means of delivery shall not have previously been used for any different product or it shall have been specially cleaned and prepared before use. 6.2 Ris

30、k and safety labelling according to the EU directives1)The following labelling requirements shall apply to trichloroisocyanuric acid at the publication date of this European Standard. Symbols and indications of danger: O: Oxidizing; Xn: Harmful; N: Dangerous for the environment. Nature of special ri

31、sks attributed to dangerous substances: R8: Contact with combustible material may cause fire; R22: Harmful if swallowed; R31: Contact with acids liberates toxic gas; R36/37: Irritating to eyes and respiratory system; R 50/53: Very toxic to aquatic organisms, may cause long-term adverse effects in th

32、e aquatic environment. Safety advice concerning dangerous substances: S8: Keep container dry; 1)See 1DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 7 S26: In case of contact with eyes, rinse immediately with water and seek medical advice; S41: In case of fire and/or explosion do not breathe fumes; S

33、60: This material and its container must be disposed of as hazardous waste; S 61: Avoid release to the environment. Refer to special instructions /Safety data sheets. NOTE Annex I of the directive 67/548/EEC (1) on classification, packaging and labelling of dangerous substances and its amendments an

34、d adaptations in the European Union contains a list of substances classified by the EU. Substances not in this Annex I should be classified on the basis of their intrinsic properties according to the criteria in the Directive by the person responsible for the marketing of the substance. 6.3 Transpor

35、tation regulations and labelling Trichloroisocyanuric acid is listed as UN Number 2)2468 and classified as dangerous good. RID 3) : class 5.1, classification code O2; packing group II; ADR 4) : class 5.1, classification code O2; packing group II; IMDG 5) : class 5.1; IATA 6) : class 5.1. 6.4 Marking

36、 The marking shall include the following information: name “trichloroisocyanuric acid“, trade name and type; net mass; name and the address of supplier and/or manufacturer; statement “this product conforms to EN 15032“. 6.5 Storage 6.5.1 General The product shall be stored in its original package, f

37、irmly closed in a cool dry place, away from any sources of heat or incompatible materials. 2)United Nations Number.3)Regulations concerning International carriage of Dangerous goods by rail.4)European Agreement concerning the international carriage of Dangerous goods by Road.5)International maritime

38、 transport of Dangerous Goods.6)International Air Transport Association.DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 8 6.5.2 Long term stability When stored in above conditions, the product is stable for at least three years. 6.5.3 Storage incompatibilities Store the product on its own, if possibl

39、e. Keep away from: strong acids; water, moisture; nitrogenated products; organic solvents; hydrocarbons; peroxides; hypochlorites; oils, greases and organic materials. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 9 Annex A (informative) General information on trichloroisocyanuric acid A.1 Origin A

40、.1.1 Raw materials Trichloroisocyanuric acid is manufactured from isocyanuric acid (CNOH)3, sodium hydroxide (NaOH) and chlorine (Cl2). A.1.2 Manufacturing process Trichloroisocyanuric acid is produced by chlorination of trisodium cyanurate (Na3(NCO)3) using chlorine (Cl2). Trisodium cyanurate is ob

41、tained by the action of sodium hydroxide on isocyarunic acid. A.2 Use A.2.1 Function The product is used as disinfectant of swimming pool water. It is an indirect source of free chlorine (HOCl) when dissolved in water, via an organic carrier substance (cyanuric acid, C3N3O3H3): C3N3O3Cl3+ 3H2O C3N3O

42、3H3+ 3HOCl. (A.1) As the disinfectant (HOCl) is used up, more chlorine atoms are released from trichloroisocyanuric acid to form hypochlorous acid. This results in an enrichment of isocyanuric acid in the pool water, which cannot be removed by the water treatment process. Only dilution with fresh wa

43、ter keeps the isocyanuric acid concentration at a satisfactory level. If the isocyanuric acid concentration becomes too high, unsatisfactory disinfection can result. The automatic amperometric monitoring of free chlorine residual is negatively affected by isocyanuric acid. A.2.2 Form in which it is

44、used The product is used in tablet and granular form. A.2.3 Treatment dose Subject to national regulations, depending on the required free chlorine concentration in the pool water. A.2.4 Means of application The product is dissolved either directly or using a dissolution device; care should be taken

45、 when used with liner or paint as bleaching can take place. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 10 A.2.5 Secondary effects The secondary effects include the following: build-up of cyanuric acid and concentration; oxidation of iron, manganese and ammonium compounds; slight increase of “Kje

46、ldahl“ nitrogen; slight increase in the chloride content; odour and colour removal; chlorination of organic compounds leading to formation of halogenated by-products (e.g. trihalomethanes). A.2.6 Removal of excess product Removal of excess product is achieved (dechlorination of excess product) by us

47、ing an aqueous solution of sodium hyposulfite (thiosulfate), sodium sulfite or sodium hydrogenosulfite. Passing through activated carbon is also effective. DIN EN 15032:2008-06 EN 15032:2006+A1:2008 (E) 11 Annex B (normative) General rules relating to safety B.1 Rules for safe handling and use The s

48、upplier shall provide current safety instructions. !NEVER MIX THIS PRODUCT WITH INORGANIC CHLORINE (sodium hypochlorite or calcium hypochlorite or any product containing them) WITHIN THE SAME CONTAINER.“ B.2 Emergency procedures B.2.1 First aid In case of contact with skin remove any excess product;

49、 rinse immediately with cold water and remove the contaminated clothes. In case of contact with eyes or mucous membranes, rinse immediately with water and seek medical advice immediately. In case of inhalation place the affected person at rest away from the polluted area; place them in a reclined position and seek medical advice immediately. In case of ingestion gently clean the mouth with a clean linen and if the person is conscious give them a large quantity of water to drink and place the person in a safe positio