DIN EN 14315-1-2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1 Specification for .pdf

《DIN EN 14315-1-2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1 Specification for .pdf》由会员分享，可在线阅读，更多相关《DIN EN 14315-1-2013 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1 Specification for .pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、April 2013 Translation by DIN-Sprachendienst.English price group 24No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!$|K“1988940www.din.deDDIN EN 14315-1Thermal insulating products for buildings In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate(PIR) foam products Part 1: Specification for the rigid foam spray system before installation;English version EN 14315-1:2013,English translatio

3、n of DIN EN 14315-1:2013-04Wrmedmmstoffe fr das Bauwesen An der Verwendungsstelle hergestellter Wrmedmmstoff aus Polyurethan (PUR)- undPolyisocyanurat (PIR)-Spritzschaum Teil 1: Spezifikation fr das Schaumsystem vor dem Einbau;Englische Fassung EN 14315-1:2013,Englische bersetzung von DIN EN 14315-1

4、:2013-04Produits isolants thermiques destins aux applications du btiment Produits en mousse rigide de polyurthanne (PUR) ou de polyisocyanurate (PIR) projete,forms en place Partie 1: Spcifications relatives aux systmes de projection de mousse rigide avant miseen oeuvre;Version anglaise EN 14315-1:20

5、13,Traduction anglaise de DIN EN 14315-1:2013-04Together with DIN EN 14315-2:2013-04, DIN EN 14318-1:2013-04, DIN EN 14318-2:2013-04,DIN EN 14319-1:2013-04, DIN EN 14319-2:2013-04, DIN EN 14320-1:2013-04 and DIN EN 14320-2:2013-04supersedes DIN 18159-1:1991-12See start of applicationSupersedes: see

6、belowwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 66pages03.13 DIN EN 14315-1:2013-04 2 A comma is used as the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products w

7、ill be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the rele

8、vant building authority. The standard which this document replaces, DIN 18159-1:1991-12, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). Nat

9、ional foreword This document (EN 14315-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insu-lating materials and products” (Secretariat: DIN, Germany), Working Group WG 15 “In situ formed insulation products” (lead-management: BSI, United Kingdom). The responsible German body inv

10、olved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. This document is part of a package of interrelated standards for the specification of factory made thermal insu-lation products. Amendments

11、 This standard differs from DIN 18159-1:1991-12 as follows: a) EN 14315-1 supersedes DIN 18159-1:1991-12 covering in-situ polyurethane (PUR) foam applied by spraying. Previous editions DIN 18159-1: 1978-06, 1991-12 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14315-1 January 2013 ICS 91.100.

12、60 English Version Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation Produits isolants thermiques destins aux applications du btiment - Produ

13、its en mousse rigide de polyurthanne (PUR) ou de polyisocyanurate (PIR) projete, forms en place - Partie 1: Spcifications relatives aux systmes de projection de mousse rigide avant mise en oeuvre Wrmedmmstoffe fr das Bauwesen - An der Verwendungsstelle hergestellter Wrmedmmstoff aus Polyurethan (PUR

14、) - und Polyisocyanurat (PIR)-Spritzschaum - Teil 1: Spezifikation fr das Schaumsystem vor dem Einbau This European Standard was approved by CEN on 17 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan

15、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Englis

16、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bu

17、lgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

18、Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.

19、EN 14315-1:2013: EEN 14315-1:2013 (E) 2 Contents Page Foreword . 4 1 Scope 5 2 Normative references . 5 3 Terms, definitions, symbols and abbreviations 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviations . 8 4 Requirements . 9 4.1 General . 9 4.2 For all applications . 9 4.3 Specific applica

20、tions 12 5 Test methods 15 5.1 Sampling and test specimen preparation . 15 5.2 Conditioning . 15 5.3 Testing 16 6 Designation code . 18 7 Evaluation of conformity 18 7.1 General . 18 7.2 Initial type testing . 19 7.3 Factory production control 19 8 Marking, labelling and technical information 19 8.1

21、 Marking and labelling . 19 8.2 Technical information 19 Annex A (normative) Determination of declared aged thermal conductivity and aged thermal resistance . 21 A.1 Introduction 21 A.2 Input data 21 A.3 Declared values 21 Annex B (normative) Initial type testing (ITT) and Factory production control

22、 (FPC) . 23 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity 25 C.1 General . 25 C.2 Sampling and test specimen preparation . 25 C.3 Determination of the initial value of thermal conductivity . 26 C.4 Determination of the accelerated aged value of t

23、hermal conductivity 27 C.5 Fixed increment procedure 29 C.6 Declaration of the aged values of thermal resistance and aged thermal conductivity . 31 Annex D (normative) Preparation of the test sample 33 D.1 Principle 33 D.2 Procedure . 33 Annex E (normative) Determination of the reaction profile and

24、free-rise density 34 E.1 Introduction 34 E.2 Principle 34 E.3 Apparatus . 34 E.4 Procedure . 34 E.5 Free-rise density 35 Annex F (normative) Determination of substrate adhesion strength perpendicular to faces . 36 DIN EN 14315-1:2013-04 EN 14315-1:2013 (E) 3 F.1 Principle 36 F.2 Apparatus . 36 F.3 S

25、ample preparation and conditioning . 36 F.4 Preparation of test specimens . 36 F.5 Testing procedure 36 F.6 Presentation of results . 36 Annex G (normative) Testing for reaction to fire products . 37 G.1 Scope 37 G.2 Product and installation parameters . 37 G.3 Mounting and fixing . 38 G.4 Field of

26、application . 40 Annex H (normative) Testing for reaction to fire products in standardised assemblies simulating end-use application(s) 42 H.1 Scope 42 H.2 Product and installation parameters . 42 H.3 Mounting and fixing . 43 H.4 Field of application . 47 Annex I (informative) Example for the determ

27、ination of the declared aged values of thermal conductivity and thermal resistance for a product . 49 Annex J (normative) Instructions for compiling thermal resistance performance charts . 51 J.1 Introduction 51 J.2 General . 51 J.3 Procedure for the manufacturer to create the performance charts . 5

28、3 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 57 Bibliography 64 DIN EN 14315-1:2013-04 EN 14315-1:2013 (E) 4 Foreword This document (EN 14315-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insula

29、ting materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the lates

30、t by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the Eu

31、ropean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of two parts which form a package. The first

32、 part is the harmonised part satisfying the mandate and the CPD and is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Both parts need to be used for the applic

33、ation of the insulation products in the end-use applications covered by EN 14315. This European Standard is one of a series for mineral wool, expanded clay, expanded perlite, exfoliated vermiculite, polyurethane/polyisocyanurate, cellulose, bound expanded polystyrene and expanded polystyrene in-situ

34、 formed insulation products used in buildings, but this standard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal pro

35、cesses. EN 14315, Thermal insulating products for buildings In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products, consists of the following parts: Part 1: Specification for the rigid foam spray system before installation (the present document) Part 2: Specificatio

36、n for the installed insulation products According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yug

37、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14315-1:2013-04 EN 14315-1:2013 (E) 5 1

38、Scope This European Standard specifies requirements for in-situ formed sprayed rigid polyurethane (PUR) and rigid polyisocyanurate (PIR) foam products when applied to walls, ceilings, roofs, suspended ceilings and floors. This Part 1 of this European Standard is a specification for the rigid foam sp

39、ray system before installation. Part 1 of this European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This European Standard does not specify the required levels of all properties to be achieved b

40、y a product to demonstrate fitness for purpose in a particular end-use application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made rigid polyurethane (PUR) or polyisocyanurate (PIR) foam insulation products or in-si

41、tu products intended to be used for the insulation of building equipment and industrial installations. NOTE Foam products are either called flexible or rigid. The flexible products are used in upholstery and mattresses and are characterised by their ability to deflect, support and recover to their o

42、riginal thickness continually during their in-use phase. Those that are not flexible are termed rigid and do not possess these flexible characteristics. They are mostly used for thermal insulation purposes and vary widely in their compression strength values. Once the cell structure is crushed in a

43、rigid foam, it does not recover its thickness fully. Some of these rigid foams are very low in density with very low compression strengths and are sometimes described “commercially” as “soft foams” or “semi-rigid” foams. This note has been included to clarify that all foams with such descriptions ar

44、e covered by this standards used of the term rigid foam. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates

45、t edition of the referenced document (including any amendments) applies. EN 312, Particleboards Specifications EN 508-1, Roofing products from metal sheet Specification for self-supporting products of steel, aluminium or stainless steel sheet Part 1: Steel EN 520, Gypsum plasterboards Definitions, r

46、equirements and test methods EN 823, Thermal insulating products for building applications Determination of thickness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of t

47、he apparent density EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load a

48、nd temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607:1996, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications Determination of short term water absorption by partial immersion DIN EN 14315-1:2013-04 EN 14315-1:2013 (E) 6 EN 12086, Thermal insulating products for building applications Determinati