DIN EN 14314-2016 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification German version EN 14314.pdf

《DIN EN 14314-2016 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification German version EN 14314.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14314-2016 Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification German version EN 14314.pdf（49页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N(Q“2430546www.din.deDI

2、N EN 14314Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification;English version EN 14314:2015,English translation of DIN EN 14314:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen

3、in der Industrie Werkmig hergestellte Produkte aus Phenolharzschaum (PF) Spezifikation;Englische Fassung EN 14314:2015,Englische bersetzung von DIN EN 14314:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs en mousse phnolique (PF)

4、 Spcification;Version anglaise EN 14314:2015,Traduction anglaise de DIN EN 14314:2016-03SupersedesDIN EN 14314:2013-04See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 49 pages 03

5、.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European

6、Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14314:2013-04, ma

7、y be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14314:2015) has been prepared by Technical Committee CEN/T

8、C 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebstechnische Anlagen i

9、n Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14314:2013-04 as follows: a) an addition has been made to the foreword; b) 3.2.2 has been amended; c) a new Subclause 4.3.10 has been added; d) 5.3.2 has been amended; e) Clause 7 has been amended;

10、f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14314: 2010-03, 2013-04 DIN EN 14314:2016-03EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14314 December 2015 ICS 91.100.60 Supersedes EN 14314:2009+A1:2013English

11、Version Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse phnolique (PF) - Spcification

12、 Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal R

13、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN m

14、ember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions

15、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pola

16、nd, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation i

17、n any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14314:2015 EEN 14314:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and def

18、initions as given in EN ISO 9229 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviated terms used in this standard 10 4 Requirements 11 4.1 General . 11 4.2 For all applications 11 4.2.1 Thermal conduct

19、ivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 13 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3 For specific applications 14 4.3.1 General . 14 4.3.2 Maximum service temperature . 14 4.3.3 Minimum service tempera

20、ture . 14 4.3.4 Dimensional stability under specified conditions . 14 4.3.5 Compression resistance properties 15 4.3.6 Water vapour diffusion resistance 16 4.3.7 Water absorption . 16 4.3.8 Closed cell content . 17 4.3.9 Trace quantities of water soluble chloride and the pH-value 17 4.3.10 Release o

21、f dangerous substances . 17 4.3.11 Continuous glowing combustion 17 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning . 18 5.3 Testing 18 5.3.1 General . 18 5.3.2 Thermal conductivity . 20 5.3.3 Reaction to Fire . 21 6 Designation code 21 7 Assessment and Verification of the Constancy of Performa

22、nce (AVCP) . 21 7.1 General . 21 7.2 Product Type Determination (PTD) 22 7.3 Factory Production Control (FPC) 22 8 Marking and labelling . 22 DIN EN 14314:2016-03EN 14314:2015 (E) 3 Annex A (normative) Factory production control . 23 Annex B (normative) Determination of the aged value of thermal con

23、ductivity . 25 B.1 General . 25 B.2 Preparation of test sample 25 B.3 Determination of the initial value of thermal conductivity 26 B.4 Determination of the aged value of thermal conductivity . 26 B.5 Blowing agent . 27 B.6 Declaration of thermal resistance and thermal conductivity 27 Annex C (norma

24、tive) Determination of minimum service temperature . 28 C.1 Definitions . 28 C.2 Principle . 28 C.3 Apparatus 28 C.4 Test specimens 29 C.5 Procedure 29 C.6 Calculation and expression of results . 30 C.7 Accuracy of measurements . 30 C.8 Test report 30 C.9 Modifications of and additions to the genera

25、l test method for phenolic foams 31 Annex D (informative) Additional properties . 34 D.1 General . 34 D.2 Apparent density 34 D.3 Coefficient of thermal expansion 34 D.4 Water vapour transmission of preformed pipe insulation . 34 D.5 Tensile strength perpendicular to faces 34 D.6 Shear strength 34 D

26、.7 Bending strength 35 D.8 Cell gas composition 35 D.9 Cryogenic application . 35 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 36 ZA.1 Scope and relevant characteristics 36 ZA.2 Procedures for AVCP of factory made phe

27、nolic foam 38 ZA.3 CE Marking and labelling . 45 Bibliography . 47 DIN EN 14314:2016-03EN 14314:2015 (E) 4 European foreword This document (EN 14314:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This Eur

28、opean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the ele

29、ments of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14314:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance o

30、f the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14314 are the following: a) an addition to the foreword; b) modifications in 3.2.2; c) a new 4.3.10; d) modification of 5.3.2; e) replacement of Clause 7;

31、 f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Reg

32、ulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional proper

33、ties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory p

34、roduction control; Annex B (normative), Determination of the aged value of thermal conductivity; Annex C (normative), Determination of minimum service temperature; Annex D (informative), Additional properties; DIN EN 14314:2016-03EN 14314:2015 (E) 5 Annex ZA (informative), Clauses of this European S

35、tandard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations but this standard can be used in other areas, wh

36、ere appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of thi

37、s package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations F

38、actory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations

39、 Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Facto

40、ry made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for buildin

41、g equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for b

42、uilding equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the C

43、EN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

44、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14314:2016-03EN 14314:2015 (E) 6 1 Scope This European Standard specifies the requirements for fac

45、tory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 C to + 120 C. Below an operating temperature of - 50 C, special tests regarding the suitability of the produ

46、cts in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware. This European Standard describes product chara

47、cteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This European Sta

48、ndard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal condu

49、ctivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure. This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents,