DIN EN 14309-2016 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification German versi.pdf

《DIN EN 14309-2016 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification German versi.pdf》由会员分享，可在线阅读，更多相关《DIN EN 14309-2016 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification German versi.pdf（55页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%M“2429959www.din.deDIN

2、EN 14309Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification;English version EN 14309:2015,English translation of DIN EN 14309:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische

3、 Anlagen in der Industrie Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) Spezifikation;Englische Fassung EN 14309:2015,Englische bersetzung von DIN EN 14309:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs en poly

4、styrne expans (PSE) Spcification;Version anglaise EN 14309:2015,Traduction anglaise de DIN EN 14309:2016-03SupersedesDIN EN 14309:2013-04See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document co

5、mprises 55 pages 03.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journ

6、al of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN E

7、N 14309:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14309:2015) has been prepared by Techni

8、cal Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebst

9、echnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14309:2013-04 as follows: a) an addition has been made to the foreword; b) an addition has been made to 3.2.2; c) a new Subclause 4.3.15 has been added; d) 5.3.2 has been amended;

10、 e) Clause 7 has been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14309: 2010-03, 2013-04 DIN EN 14309:2016-03EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14309 December 2015 ICS 91.100.60 Supersede

11、s EN 14309:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufactu

12、rs en polystyrne expans (PSE) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members

13、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

14、to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

15、 Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

16、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B

17、-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14309:2015 EEN 14309:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .

18、 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 9 3.2 Symbols, units and abbreviated terms . 10 3.2.1 Symbols and units used in this standard . 10 3.2.2 Abbreviated terms used in this standard 12 4 Requirements 12 4.1

19、 General . 12 4.2 For all applications 12 4.2.1 Thermal conductivity . 12 4.2.2 Dimensions and tolerances 13 4.2.3 Dimensional stability 13 4.2.4 Reaction to fire of the product as placed on the market 14 4.2.5 Durability characteristics . 14 4.3 For specific applications 15 4.3.1 General . 15 4.3.2

20、 Maximum service temperature . 15 4.3.3 Minimum service temperature . 15 4.3.4 Dimensional stability under specified temperature and humidity conditions . 15 4.3.5 Compressive stress at 10 % deformation 15 4.3.6 Tensile strength perpendicular to faces 16 4.3.7 Bending strength 16 4.3.8 Compressive c

21、reep. 17 4.3.9 Water absorption . 18 4.3.10 Water vapour transmission 18 4.3.11 Apparent density 19 4.3.12 Dynamic stiffness . 19 4.3.13 Compressibility . 19 4.3.14 Trace quantities of water soluble ions and pH 20 4.3.15 Release of dangerous substances . 20 4.3.16 Continuous glowing combustion 21 5

22、Test methods . 21 5.1 Sampling 21 5.2 Conditioning . 21 5.3 Testing 21 5.3.1 General . 21 5.3.2 Thermal conductivity . 23 5.3.3 Reaction to fire 24 6 Designation code 24 7 Assessment and Verification of the Constancy of Performance (AVCP) . 25 DIN EN 14309:2016-03EN 14309:2015 (E) 37.1 General . 25

23、7.2 Product Type Determination (PTD) 25 7.3 Factory Production Control (FPC) 25 8 Marking and labelling . 26 Annex A (normative) Factory production control . 27 A.1 Indirect testing 30 Annex B (normative) Product classification 34 Annex C (normative) Determination of minimum service temperature . 35

24、 C.1 Definitions . 35 C.2 Principle . 35 C.3 Apparatus 35 C.4 Test specimens 35 C.5 Procedure 36 C.6 Calculation and expression of results . 36 C.7 Accuracy of measurements . 37 C.8 Test report 37 Annex D (informative) Additional properties . 39 D.1 General . 39 D.2 Long-term compressive behaviour 3

25、9 D.3 Shear behaviour 39 D.4 Water vapour diffusion resistance factor 40 D.5 Coefficient of thermal expansion 40 D.6 Behaviour under cyclic loading . 40 D.7 Test methods 41 D.8 Additional information . 41 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Co

26、nstruction Products Regulation . 42 ZA.1 Scope and relevant characteristics 42 ZA.2 Procedures for AVCP of factory made products of expanded polystyrene (EPS) 44 ZA.3 CE Marking and labelling . 51 Bibliography . 53 DIN EN 14309:2016-03EN 14309:2015 (E) 4 European foreword This document (EN 14309:201

27、5) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 201

28、6, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent righ

29、ts. This document supersedes EN 14309:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14309

30、are the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.15; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European

31、 Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities

32、, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or t

33、he industrial installation projected or because of safety regulations. This European Standard contains five annexes: Annex A (normative), Factory production control; Annex B (normative), Product classification; Annex C (normative), Determination of minimum service temperature; Annex D (informative),

34、 Additional properties; DIN EN 14309:2016-03EN 14309:2015 (E) 5 Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation

35、 products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after a

36、vailability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within

37、the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FE

38、F) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) pro

39、ducts Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane

40、foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial in

41、stallations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial install

42、ations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cypr

43、us, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

44、 Kingdom. DIN EN 14309:2016-03EN 14309:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximat

45、ely - 180 C to + 80 C. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this standard. Below an operating temperature of - 50 C, special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen)

46、. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, rolls, lags, pipe sections or other prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking a

47、nd labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level or class of a given property that should be achiev

48、ed by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this stand

49、ard. This standard does not cover products for in situ insulation (for loose fill or poured insulation) or products for the insulation of the building structure. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edit