DIN EN 14033-1-2011 Railway applications - Track - Railbound construction and maintenance machines - Part 1 Technical requirements for running German version EN 14033-1 2011《轨道交通 轨.pdf
《DIN EN 14033-1-2011 Railway applications - Track - Railbound construction and maintenance machines - Part 1 Technical requirements for running German version EN 14033-1 2011《轨道交通 轨.pdf》由会员分享,可在线阅读,更多相关《DIN EN 14033-1-2011 Railway applications - Track - Railbound construction and maintenance machines - Part 1 Technical requirements for running German version EN 14033-1 2011《轨道交通 轨.pdf(76页珍藏版)》请在麦多课文档分享上搜索。
1、May 2011 Translation by DIN-Sprachendienst.English price group 26No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 45
2、.120; 93.100!$p_a“1776062www.din.deDDIN EN 14033-1Railway applications Track Railbound construction and maintenance machines Part 1: Technicalrequirements for runningEnglish translation of DIN EN 14033-1:2011-05Bahnanwendungen Oberbau Schienengebundene Bau- und Instandhaltungsmaschinen Teil 1: Techn
3、ische Anforderungen an das FahrenEnglische bersetzung von DIN EN 14033-1:2011-05Applications ferroviaires Voies Machines de construction et de maintenance empruntant exclusivement les voiesferres Partie 1: Prescriptions techniques pour la circulationTraduction anglaise de DIN EN 14033-1:2011-05Super
4、sedesDIN EN 14033-1:2009-03www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.7604.11 DIN EN 14033-1:2011-05 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 256 “R
5、ailway applications” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Fahrweg und Schienenfahrzeuge (Railway Standards Committee), Working Committee NA 087-00-01 AA Oberbau. This document is based on the English reference version EN 14033-1
6、:2011. Amendments This standard differs from DIN EN 14033-1:2009-03 as follows: a) Clause 9 “Brakes” has been modified; b) Annex B “Special national conditions” has been extended; c) Annex L (informative) “Migration rule for this European Standard” has been added; d) Annex K (informative) “Structure
7、 of European Standards for track construction and maintenance” has been added; e) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC” has been updated; f) Annex H (normative) “Certificates” has been deleted. Previous editions
8、 DIN EN 14033-1: 2009-03 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14033-1 February 2011 ICS 45.120; 93.100 Supersedes EN 14033-1:2008English Version Railway applications Track Railbound construction and maintenance machines Part 1: Technical requirements for running Applications ferrov
9、iaires Voies Machines de construction et de maintenance empruntant exclusivement les voies ferres Partie 1: Prescriptions techniques pour la circulation Bahnanwendungen Oberbau Schienengebundene Bau- und Instandhaltungsmaschinen Teil 1: Technische Anforderungen an das Fahren This European Standard w
10、as approved by CEN on 8 January 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n
11、ational standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own la
12、nguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
13、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brus
14、sels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14033-1:2011: EContents Page Foreword 5Introduction .61 Scope 61.1 General 61.2 Validity of the European Standard .62 Normative references 63 Terms and definitions .94 Machi
15、ne categorisation 104.1 Categories . 104.2 Type examination and categories . 105 Gauge . 115.1 General rules . 115.2 Stowing of moveable machine parts in transport positions 116 Frame . 116.1 Principal dimensions 116.2 Design of the machine frame . 116.3 Lifting and jacking points 126.4 Stowage poin
16、ts for transport on boats. 127 Running gear . 137.1 General . 137.2 Wheel diameter . 137.3 Static axle loading 137.4 Wheel profile . 137.5 Shape and dimensions of the axles and wheelsets 137.6 Axle arrangement and axle loads 147.7 Design for longitudinal compressive forces 157.8 Lifeguards 158 Runni
17、ng safety 168.1 Running tests 168.2 Running safety on track twists 178.3 Running simulation 179 Brakes 179.1 Compulsory braking equipment 179.2 Characteristics 189.2.1 Performance 189.2.2 Mechanical characteristics of the brake 199.2.3 Automatic compressed air brake 199.2.4 Direct brake . 209.2.5 Br
18、ake functions to keep a machine stationary 209.2.6 Dynamic brake 219.2.7 Emergency brake 219.2.8 Brake distributor controls 229.2.9 Other brake systems 229.3 Air reservoirs . 229.4 Compressed air production of self-propelled machines 229.5 Brake hose connections 239.6 Special braking equipment 232EN
19、 14033-1:2011 (E) DIN EN 14033-1:2011-05 10 Buffing and draw gear . 2310.1 Couplings . 2310.2 Buffers 2310.3 Interaction forces between the machine and coupled vehicles . 2410.4 Space to be kept free at the end of the machine 2410.5 Buffer handrail . 2410.6 Shunters step . 2411 Operation of track ci
20、rcuits, axle-counters, treadles for level crossings, hot box detectors andunreleased brake detectors 2411.1 Operation of track circuits 2411.2 Operation of axle-counters and treadles for level crossings 2511.3 Operation of hot axle box and unreleased brake detectors 2512 Running safety equipment . 2
21、512.1 Indication equipment . 2512.2 Data recorder . 2513 Warning equipment and lights . 2513.1 Warning horns . 2513.2 Lamp brackets and marker lights 2513.2.1 Lamp brackets . 2513.2.2 Arrangement of marker lights 2713.2.3 Light characteristics 2713.2.4 Additional devices . 2813.2.5 Light switching a
22、rrangements . 2814 Drivers cabs and driving positions 2814.1 General 2814.2 Access to cab . 2814.2.1 General 2814.2.2 Steps, handrails, platforms and railings . 2814.2.3 Doors. 2814.3 Interior of cab . 2914.3.1 Drivers position . 2914.3.2 Additional seats . 2914.3.3 Layout of drivers cab(s) 2914.3.4
23、 Windscreens 2914.3.5 Side windows . 3014.4 Heating, cooling and ventilation 3014.5 Internal lighting 3014.6 Area of visibility . 3114.7 Drivers desks . 3114.8 Controls and indicators 3114.9 Drivers and assistants seats 3214.10 Equipment and controls 3214.10.1 Minimum equipment necessary for the dri
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DINEN1403312011RAILWAYAPPLICATIONSTRACKRAILBOUNDCONSTRUCTIONANDMAINTENANCEMACHINESPART1TECHNICALREQUIREMENTSFORRUNNINGGERMANVERSIONEN1403312011

链接地址:http://www.mydoc123.com/p-666878.html