DIN EN 13451-2-2016 Swimming pool equipment - Part 2 Additional specific safety requirements and test methods for ladders stepladders and handle bends German version EN 13451-2 201.pdf

《DIN EN 13451-2-2016 Swimming pool equipment - Part 2 Additional specific safety requirements and test methods for ladders stepladders and handle bends German version EN 13451-2 201.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13451-2-2016 Swimming pool equipment - Part 2 Additional specific safety requirements and test methods for ladders stepladders and handle bends German version EN 13451-2 201.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.220.10!%LsK“2418040www.din.deDI

2、N EN 13451-2Swimming pool equipment Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends;English version EN 13451-2:2015,English translation of DIN EN 13451-2:2016-03Schwimmbadgerte Teil 2: Zustzliche besondere sicherheitstechnische Anforderungen

3、 und Prfverfahren fr Leitern, Treppenleitern und Griffbgen;Englische Fassung EN 13451-2:2015,Englische bersetzung von DIN EN 13451-2:2016-03quipement de piscine Partie 2: Exigences de scurit et mthodes dessai complmentaires propres aux chelles verticales, aux chelles inclinaison et aux mains courant

4、es;Version anglaise EN 13451-2:2015,Traduction anglaise de DIN EN 13451-2:2016-03SupersedesDIN EN 13451-2:2001-07www.beuth.deDocument comprises 15 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.02.16 DIN EN 13451-2:2016-03 2 A

5、 comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. National foreword This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN 13451-2:2015) ha

6、s been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, Working Committee WG 8 “Swimming pools” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Sport- und Freizeitgert (DIN St

7、andards Committee Sports Equipment), Working Committee NA 112-05-01 AA Schwimmbadanlagen und -gerte. Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German

8、Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed that ladders, stepladders and handle bends which comply with this standard fulfil the relevant health and safety requirements

9、. Amendments This standard differs from DIN EN 13451-2:2001-07 as follows: a) the scope has been updated by making reference to EN 15288-1 and EN 15288-2; b) normative references have been updated; c) Clause 3 “Terms and definitions” has been updated; d) the ladder dimensions have been changed; e) t

10、he stepladder dimensions have been changed; f) examples of easier access to the pool to address the needs of older persons and persons with disabilities have been added as an informative annex; g) a Bibliography has been added. Previous editions DIN 7930: 1980-04, 1987-04 DIN EN 13451-2: 2001-07 EUR

11、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13451-2 December 2015 ICS 97.220.10 Supersedes EN 13451-2:2001English Version Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends Equipement de piscine - Partie 2: Exige

12、nces de scurit et mthodes dessai complmentaires propres aux chelles verticales, aux chelles inclinaison et aux mains courantes Schwimmbadgerte - Teil 2: Zustzliche besondere sicherheitstechnische Anforderungen und Prfverfahren fr Leitern, Treppenleitern und Griffbgen This European Standard was appro

13、ved by CEN on 7 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

14、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

15、and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hun

16、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENE

17、LEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-2:2015 EEN 13451-2:2015 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative references 5 3 Terms and de

18、finitions . 5 4 Safety requirements . 5 4.1 Dimensions 5 4.1.1 General 5 4.1.2 Ladders . 6 4.1.3 Stepladders 7 4.1.4 Handle bends 9 4.2 Structural integrity 10 4.3 Slip resistance . 11 5 Test methods . 11 6 Additional instructions for use . 11 Annex A (informative) Examples of easier access to the p

19、ool to address the needs of older persons and persons with disabilities 12 Bibliography . 13 DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 3 European foreword This document (EN 13451-2:2015) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and eq

20、uipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016 and conflicting national standards shall be withdrawn at the latest by June 2016. Atten

21、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13451-2:2001. In relation to EN 13451-2:2001, the following sig

22、nificant modifications have been made: a) the scope has been updated by referring to EN 15288-1 and EN 15288-2; b) the normative references have been updated; c) the terms and definitions have been modified; d) dimensions for the ladder have been modified; e) dimensions for the step ladder have been

23、 modified; f) examples of easier access to the pool to address the needs of older persons and persons with disabilities has been added as an informative annex; g) a bibliography has been added. EN 13451, Swimming pool equipment, consists of the following parts: Part 1: General safety requirements an

24、d test methods; Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features; Part 4: Additional specific safety requireme

25、nts and test methods for starting platforms; Part 5: Additional specific safety requirements and test methods for lane lines and dividing line; Part 6: Additional specific safety requirements and test methods for turning boards; Part 7: Additional specific safety requirements and test methods for wa

26、ter polo goals; Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment; DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 4 Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable b

27、ulkheads. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

28、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 5 1 Scope This part of EN 13451 sp

29、ecifies safety requirements for ladders, stepladders and handle bends in addition to the general safety requirements of EN 13451-1. The requirements of this specific standard take priority over those in EN 13451-1. This part of EN 13451 is applicable to manufactured ladders, stepladders and handle b

30、ends used for pool access and egress for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only

31、the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13451-1:2011, Swimming pool equipment - Part 1: General safety requirements and test methods 3 Terms and definitions For the purposes of this document, the terms an

32、d definitions given in EN 13451-1:2011 and the following apply. 3.1 ladder vertical structure with horizontal treads and two handrails used for access and egress from the water to the surrounding area 3.2 stepladder inclined structure with horizontal treads and handrail(s) used for access and egress

33、 from the water to the surrounding area 3.3 tread area of the step which comes into contact with the foot of the user while ascending or descending 3.4 step horizontal component intended to bear the load of the user 3.5 handle bends structures designed to assist access and egress from the water to t

34、he surrounding area 4 Safety requirements 4.1 Dimensions 4.1.1 General The dimensions indicated in the Figures 1 to 3 shall be complied with. The design of the equipment does not need to comply with the examples given. The cross section of parts designed to be gripped can be round, oval, a rounded r

35、ectangular or elliptical and shall be between 25 mm and 50 mm. DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 6 4.1.2 Ladders NOTE Recessed ladders not protruding into the pool and asymmetric handle bends splaying to the pool surround and having a difference in height are preferred. If there is a distan

36、ce between w1and w2,then it shall widen in an even transition on each side. The front edge of all other treads shall be in the same vertical plane as the first tread with the plane having a tolerance of 10 mm from the top to the bottom of the ladder. The rise between each tread (h3) shall be equal.

37、The upper tread shall be flush with the pool edge or comply with the dimensions given in Figure 1 and Table 1. Key WS water surface Figure 1 Example of ladder DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 7 Table 1 Dimensions of a ladder Dimension in Figure 1 Minimum mm Maximum mm w1450 600 w2w1800 h17

38、50 h2h2750 950 h3230 300 h4110 h5175 h6200 h2h7 0 or h3/2h3d175 d20 8 d350 d1d40 8 or 25 75 d525 110 4.1.3 Stepladders 4.1.3.1 General Stepladders shall have at least one handrail. Treads designed as circular tubular rungs are not allowed. If it is expected that the stepladder is used with a high fr

39、equency in both directions a greater width as given in 4.1.3.2 and 4.1.3.3 is recommended to make sure that two persons can pass (e.g. minimum 940 mm). If the width of the ladder exceeds 1 200 mm at least one additional handrail is required, which is at least 600 mm away from the other handrail(s).

40、NOTE See Annex A for examples of easier access to the pool to address the needs of older persons and persons with disabilities. To prevent accidents caused by entrapment due to swimming underneath, the following applies: a) if the width of stepladder is 1 100 mm the closing of the open sides with an

41、 adequate device is mandatory; b) if the width of stepladder is 1 100 mm and access to the area underneath the stepladder is possible, both sides shall be open and the stepladder shall be placed with min. 600 mm free space to each side. The distance between the top step and the wall shall be no more

42、 than 8 mm. DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 8 4.1.3.2 Fixed stepladders The handrails shall have a vertical height (h1) between 750 mm and 950 mm and shall lead back to the pool surround (see Figure 2). The ends of the handrails shall be bent downwards to a radius of at least 50 mm up to

43、the horizontal line or in a curve of not less than 100. The handrails shall have the same inclination as the stepladder itself. The maximum vertical distance (h2) between the top surfaces of two adjacent treads shall be 250 mm. The upper tread shall be flush with the edge of the pool border. The cle

44、ar opening between two adjacent treads or the lowest step and the pool floor shall comply with the entrapment requirements according to EN 13451-1. The maximum angle of inclination with the horizontal shall be 45. The front edge of the upper step and the back edge of the lower step of two adjacent t

45、reads shall be on the same vertical plane or the treads shall be overlapping. Key d1 250 mm h1750 mm to 950 mm h2 250 mm h3according to EN 13451-1 w1 600 mm Figure 2 Fixed stepladders DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 9 4.1.3.3 Variable Stepladders Variable stepladders are designed to be us

46、ed in conjunction with movable floors. The handrails shall have the same inclination as the stepladder itself. In any using position, the clear opening between two adjacent treads or the lowest step and the pool floor shall comply with the entrapment requirements according to EN 13451-1. NOTE 1 A re

47、cessed variable stepladder is preferred. NOTE 2 If the front edge of the upper step and the back edge of the lower step of two adjacent treads are not on the same vertical plane any position used can cause additional entrapment hazards. The dimensions are given in Figure 3. Key 1 movable floor h2acc

48、ording to EN 13451-1 a range of adjustment h3 250 mm d1 250 mm w1 800 mm h1750 mm to 950 mm Figure 3 Variable stepladder 4.1.4 Handle bends They can be a separate component of a ladder or can be used in association with built in structures. The height of the handle bends shall be between 750 mm and

49、950 mm from the pool surround and shall lead the user onto the pool surround. The handle bends of ladders not completely recessed shall not protrude beyond the vertical plane of the ladders; see Figure 4 b). DIN EN 13451-2:2016-03 EN 13451-2:2015 (E) 10 The handle bends of completely recessed ladders shall not protrude beyond the vertical plane of the pool wall; see Figure 4 a). a) Recessed ladder b) Protruding ladder Key