DIN EN 13411-5-2009 Terminations for steel wire ropes - Safety - Part 5 U-bolt wire rope grips (includes Amendment A1 2008) English version of DIN EN 13411-5 2009-02《钢丝绳端头 安全性 第5部分.pdf

《DIN EN 13411-5-2009 Terminations for steel wire ropes - Safety - Part 5 U-bolt wire rope grips (includes Amendment A1 2008) English version of DIN EN 13411-5 2009-02《钢丝绳端头 安全性 第5部分.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13411-5-2009 Terminations for steel wire ropes - Safety - Part 5 U-bolt wire rope grips (includes Amendment A1 2008) English version of DIN EN 13411-5 2009-02《钢丝绳端头 安全性 第5部分.pdf（23页珍藏版）》请在麦多课文档分享上搜索。

1、February 2009DEUTSCHE NORM English price group 12No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 21.060.70; 53.020.30!

2、$UvT“1508349www.din.deDDIN EN 13411-5Terminations for steel wire ropes Safety Part 5: U-bolt wire rope grips (includes Amendment A1:2008)English version of DIN EN 13411-5:2009-02Endverbindungen fr Drahtseile aus Stahldraht Sicherheit Teil 5: Drahtseilklemmen mit U-frmigem Klemmbgel (enthlt nderung A

3、1:2008)Englische Fassung DIN EN 13411-5:2009-02SupersedesDIN EN 13411-5:2003-09www.beuth.deDocument comprises 23 pagesDIN EN 13411-5:2009-02 2 Start of validity This standard takes effect on 1 February 2009. DIN EN 13411-5:2003-09 may be used in parallel until 28 December 2009. National foreword Cla

4、use 5 of this standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories Safety” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Stahldrah

5、t und Stahldrahterzeugnisse (Steel Wire and Wire Products Standards Committee), Technical Committee NA 099-00-04 AA Drahtseile, Seil-Endverbindungen und Anschlagseile. For more detailed information about the Normenausschuss Stahldraht und Stahldrahterzeugnisse (NAD), please visit www.nad.din.de. Thi

6、s standard includes Amendment A1:2008 to EN 13411-5:2003 and contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect

7、on 29 December 2009, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Un

8、ion, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). Annexes A and B are informative. In this standard, the unit “inch” is used. It should, however, be noted tha

9、t the Gesetz ber Einheiten im Messwesen (German Law on units in metrology) prohibits the use of the unit “inch” for official and commercial purposes in Germany. Conversion: 1 inch = 25,4 mm. Amendments This standard differs from DIN EN 13411-5:2003-09 as follows: a) Subclause 7.3 b) has been modifie

10、d. b) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been added. c) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been added. Previou

11、s editions DIN 1142: 1971-08, 1972-07, 1975-10, 1982-01 DIN EN 13411-5: 2003-09 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13411-5:2003+A1 October 2008 ICS 21.060.70; 53.020.30 Supersedes EN 13411-5:2003 English Version Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope

12、grips Terminaisons pour cbles en acier - Scurit - Partie 5: Serre-cbles trier en U Endverbindungen fr Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-frmigem Klemmbgel This European Standard was approved by CEN on 25 March 2003 and includes Amendment 1 approved by CEN on 18 S

13、eptember 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may b

14、e obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN

15、Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

16、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in a

17、ny form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13411-5:2003+A1:2008: EEN 13411-5:2003+A1:2008 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 List of hazards6 Table 1 Hazards and associated requirements.

18、6 5 Safety requirements and/or measures 7 5.1 Materials .7 5.2 Mechanical properties.7 6 Verification of safety requirements7 6.1 Qualification of personnel 7 6.2 Type testing7 7 Information for use 8 7.1 Identification marking .8 7.2 Fitting instructions 9 7.3 Certificate .9 Annex A (informative) S

19、pecification for construction and sizes for one design of grip - 1 10 A.1 General10 A.2 Material .10 A.3 Dimensions.11 Figure A.1 Wire rope grip 11 Figure A.2 Bridge .11 Figure A.3 U-bolt 11 Figure A.4 Collar nut11 Table A.1 Dimensions (see Figures A1, A2, A3 and A4) 12 A.4 Fitting instructions 12 F

20、igure A.5 Spacing for grips .12 Table A.2 Torque and number of wire rope grips.13 Annex B (informative) Specification for construction and sizes for one design of grip - 2 14 B.1 General14 B.2 Material .14 B.3 Dimensions.15 Table B.1 Dimensions (see Figures B.1, B.2, B.3 and B.4) 16 B.4 Fitting inst

21、ructions 17 Figure B.5 Sequence of fitting grips 17 Table B.2 Torque and number of grips 18 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“.19 DIN EN 13411-5:2009-02 EN 13411-5:2003+A1:2008 (E) 3 Annex ZB (informative) !Rel

22、ationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“20 Bibliography21 DIN EN 13411-5:2009-02 EN 13411-5:2003+A1:2008 (E) 4 Foreword This document (EN 13411-5:2003+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slin

23、gs and accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the late

24、st by December 2009. This document supersedes EN 13411-5:2003. This document includes Amendment 1, approved by CEN on 2008-09-18. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the E

25、uropean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Annexes A and B are informative. This European Standard also cont

26、ains a Bibliography. The other Parts of this European Standard are: Part 1: Thimbles for steel wire rope slings Part 2: Splicing of eyes for wire rope slings Part 3: Ferrules and ferrule-securing Part 4: Metal and resin socketing Part 6: Asymmetric wedge socket Part 7: Symmetric wedge socket Accordi

27、ng to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

28、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13411-5:2009-02 EN 13411-5:2003+A1:2008 (E) 5 Introduction This European Standard has been prepared to provide a means of conforming with the essen

29、tial safety requirements of the Machinery Directive and associated EFTA Regulations. Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to e

30、nsure themselves that products claimed to comply consistently achieve the required level of quality. 1 Scope This European Standard specifies the minimum requirements for U-bolt wire rope grips manufactured from ferrous materials and the safe behaviour of eye terminations secured by U-bolt wire rope

31、 grips for use as intended by the manufacturer. Suitable uses include suspending static loads and single use lifting operations which have been assessed by a competent person taking into account appropriate safety factors. U-bolt wire rope grips are not suitable for use with spiral ropes. This stand

32、ard does not cover U-bolt wire rope grips as the primary securing devices on mine hoists, crane hoists or eye terminations for slings for general lifting service. Examples of grips together with fitting instructions are given in informative annexes A and B. The hazards covered by this standard are i

33、dentified in clause 4. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent

34、 amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-2:1991, Safety of machinery Basic concepts,

35、general principles for design Part 2: Technical principles and specifications. EN 1050:1996, Safety of machinery Principles for risk assessment. EN 1562, Founding Malleable cast irons. EN 12385-1:2002, Steel wire ropes Safety Part 1: General requirements. EN 12385-2:2003, Steel wire ropes Safety Par

36、t 2: Definitions, designation and classification. EN 20898-2, Mechanical properties of fasteners Part 2: Nuts with specified proof load values Coarse thread (ISO 898-2:1992). EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO

37、898-1:1999). DIN EN 13411-5:2009-02 EN 13411-5:2003+A1:2008 (E) 6 EN ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000). EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compre

38、ssion testing machines (ISO 7500-1:1999). 3 Terms and definitions For the purposes of this European Standard the terms and definitions given in EN 12385-2:2003 and the following apply: 3.1 U-bolt wire rope grip U-bolt wire rope grip: assembly consisting of a U-bolt, bridge and nuts that allow for tw

39、o parts of rope to be pressed together when the nuts are tightened 3.2 grip-secured eye termination grip-secured eye termination: eye termination secured by wire rope grips fitted in accordance with the manufacturers instructions 4 List of hazards Accidental release of a load, or release of a load d

40、ue to failure of a wire rope grip puts at risk either directly or indirectly the safety or health of those persons within the danger zone. Temperature hazard is not covered as in use temperature is limited by the wire rope. Table 1 contains those hazards that require action to reduce risk identified

41、 by risk assessment as being specific and significant for wire rope grips. Table 1 Hazards and associated requirements Hazards identified in annex A of EN 1050:1996 Relevant clause of annex A of EN 292-2:1991 Relevant clause/subclause of this standard 1 Mechanical hazard due to inadequacy of strengt

42、h 1.3.2 4.1.2.3 4.1.2.5 4.2.4 1.7.3 4.3.1 4.2.4 5 5 6 6 1.7 Puncture hazard 1.3 5 10.4 Errors of fitting hazard 1.5.4 7 DIN EN 13411-5:2009-02 EN 13411-5:2003+A1:2008 (E) 7 5 Safety requirements and/or measures 5.1 Materials 5.1.1 U-bolt Carbon steel with at least property class 5.8 but not more tha

43、n property class 8.8 in accordance with EN ISO 898-1. 5.1.2 Bridge Malleable cast iron grade W40-05 or B35-10 in accordance with EN 1562; or forged non-ageing carbon steel. 5.1.3 Nut Carbon steel with at least property class 5 in accordance with EN 20898-2 and product grade A in accordance with EN I

44、SO 4759-1. 5.2 Mechanical properties 5.2.1 Grip security/tensile efficiency of grip-secured eye termination When tested in accordance with 6.2.2 the grip-secured eye termination shall withstand a force of at least 80% of the minimum breaking force of the rope held for 5 minutes without the rope slip

45、ping more than 1 mm at the grip-secured eye termination. 5.2.2 Pulsatory fatigue behaviour of grip-secured eye termination When tested in accordance with 6.2.3 the grip-secured eye termination shall withstand a minimum of 20 000 cycles. The same grip-secured eye termination subjected to the pulsator

46、y test above shall then be tested in accordance with 6.2.2, after which the grips shall not exhibit any visible cracks, deformation or other damage. 6 Verification of safety requirements 6.1 Qualification of personnel All testing and examination shall be carried out by a competent person. 6.2 Type t

47、esting 6.2.1 General In order to prove the design, material and method of manufacture, testing shall be carried out on each class of rope for which the grips are designed. The grade of the rope shall be the highest for which the grips are designed. Where grips are intended for use with single layer

48、ropes with a fibre core and a steel core, testing shall be carried out on both. At least three assemblies having a grip-secured eye termination at one end shall be tested. NOTE The number of tests is regarded as two for assemblies having grip-secured eye terminations at both ends. DIN EN 13411-5:200

49、9-02 EN 13411-5:2003+A1:2008 (E) 8 For both tests described below, the applied force shall be transmitted to the grip-secured eye termination via a round pin(s). The angle subtended by the eye shall not exceed 30. The minimum length of free rope between the outer grips for assemblies having grip-secured eye terminations at each end shall be at least 30d, where d is the nominal rope diameter. The test machines used in the tests specified in 6.2.2 and 6.2.3 shall conform to EN ISO 7500-1. Any change of design, specif