DIN EN 13381-1-2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1 Horizontal protective membranes German version EN 13381-1 20.pdf

《DIN EN 13381-1-2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1 Horizontal protective membranes German version EN 13381-1 20.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13381-1-2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1 Horizontal protective membranes German version EN 13381-1 20.pdf（49页珍藏版）》请在麦多课文档分享上搜索。

1、December 2014 Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 13.220.50!%O/“2274412www.din.deDDIN EN 13381-1Test methods for determining the contribution to the fire resistance ofstructural members Part 1: Horizontal protective membranes;English version EN 13381-1:2014,English translation of DIN EN 13381-1:2014-12Prfverfahren zur Bestimmung des Beitrages zu

3、m Feuerwiderstand von tragendenBauteilen Teil 1: Horizontal angeordnete Brandschutzbekleidungen;Englische Fassung EN 13381-1:2014,Englische bersetzung von DIN EN 13381-1:2014-12Mthodes dessai pour dterminer la contribution la rsistance au feu des lments deconstruction Partie 1: Membranes de protecti

4、on horizontales;Version anglaise EN 13381-1:2014,Traduction anglaise de DIN EN 13381-1:2014-12SupersedesDIN CEN/TS 13381-1:2006-03www.beuth.deDocument comprises 49 pagesIn case of doubt, the German-language original shall be considered authoritative.11.14 DIN EN 13381-1:2014-12 2 A comma is used as

5、the decimal marker. National foreword This document (EN 13381-1:2014) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committ

6、ee Building and Civil Engineering), Working Committee NA 005-52-02 AA Brandverhalten von Baustoffen und Bauteilen Bauteile. Amendments This standard differs from DIN CEN/TS 13381-1:2006-03 as follows: a) the preparation of the test specimen has been rendered more precise (no more opening within the

7、floor); b) the instrumentation of the test specimen has been rendered more precise (no more steel plate within the cavity); c) the limits of applicability have been specified (several tables depending on the tested configuration). Previous editions DIN CEN/TS 13381-1: 2006-03 EUROPEAN STANDARD NORME

8、 EUROPENNE EUROPISCHE NORM EN 13381-1 September 2014 ICS 13.220.50 Supersedes CEN/TS 13381-1:2005English Version Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes Mthodes dessai pour dterminer la contribution la rsist

9、ance au feu des lments de construction - Partie 1: Membranes de protection horizontales Prfverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen - Teil 1: Horizontal angeordnete Brandschutzbekleidungen This European Standard was approved by CEN on 25 July 2014. CEN membe

10、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio

11、n to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Manageme

12、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

13、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17

14、, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13381-1:2014 EEN 13381-1:2014 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms and definitions, symbols and units 8 3.1 Terms and defin

15、itions . 8 3.2 Symbols and units . 9 4 Test equipment 9 4.1 General 9 4.2 Furnace . 9 4.3 Loading equipment 9 5 Test conditions 10 5.1 General 10 5.2 Support and restraint conditions . 10 5.2.1 Standard conditions 10 5.2.2 Other support and restraint conditions . 10 5.3 Loading conditions 10 6 Test

16、specimens 11 6.1 General 11 6.2 Fixtures and fittings 11 6.3 Horizontal protective membranes 11 6.4 Structural building members supporting horizontal protective membranes 12 6.4.1 General principles . 12 6.4.2 Standard horizontal structural building members . 12 6.5 Properties of test materials 13 6

17、.6 Verification of the test specimen . 14 6.7 Optional and additional plate thermometers within the cavity . 14 7 Installation of the test construction . 14 8 Conditioning . 14 9 Application of instrumentation 15 9.1 General 15 9.2 Instrumentation for measurement of furnace temperature . 15 9.3 Inst

18、rumentation for measurement of specimen temperature . 15 9.3.1 General 15 9.3.2 Instrumentation for measuring cavity temperature . 15 9.3.3 Instrumentation for measuring surface temperatures . 15 9.3.4 Optional and supplementary instrumentation for measuring temperature . 16 9.4 Instrumentation for

19、measurement of pressure 17 9.5 Instrumentation for measurement of deflection . 17 9.6 Instrumentation for measurement of applied load . 17 10 Test procedure . 17 10.1 General 17 10.2 Furnace temperature and pressure . 17 10.3 Application and control of load 17 10.4 Temperatures of test specimen . 17

20、 10.5 Deflection . 17 10.6 Observations 18 10.7 Termination of the test 18 DIN EN 13381-1:2014-12 EN 13381-1:2014 (E) 3 11 Test results 18 11.1 Acceptability of test results . 18 11.2 Presentation of test results 18 12 Test report . 19 13 Assessment . 19 13.1 General . 19 13.2 Assessment of loadbear

21、ing capacity . 19 13.2.1 General . 19 13.2.2 Characteristic temperature curve: cavity temperatures . 20 13.2.3 Characteristic temperature curve: surface temperatures (steel beams or steel/concrete slabs) 20 13.2.4 Application of method of limiting temperatures 20 13.3 Assessment of data for calculat

22、ion purposes . 21 14 Report of the assessment 21 15 Limits of applicability of the results of the assessment . 22 15.1 Type of structural building member . 22 15.2 Type of concrete . 29 15.3 Type of steel beam 30 15.4 Type of steel/concrete composite structures 30 15.5 Type of timber structure . 30

23、15.6 Height of the cavity . 31 15.7 Exposed width of test specimen . 31 15.8 Properties of the horizontal protective membrane . 31 15.9 Size of panels within the horizontal protective membrane 31 15.10 Fixtures and fittings 31 15.11 Gaps between grid members and test frame or walls 31 Annex A (norma

24、tive) Exposure to a semi-natural fire 38 A.1 General . 38 A.2 Semi-natural fire source . 38 A.3 Test equipment . 38 A.4 Test conditions . 39 A.5 Test specimen . 39 A.6 Installation of the test specimen . 40 A.7 Conditioning 40 A.8 Application of instrumentation 40 A.9 Test procedure 40 A.10 Test res

25、ults 40 A.11 Test report . 40 A.12 The assessment 40 A.13 The assessment report . 40 Annex B (normative) Measurement of properties of horizontal protective membranes and components . 42 B.1 General . 42 B.2 Thickness of horizontal protective membrane and its components . 42 B.3 Density of horizontal

26、 protective membranes and components thereof . 43 B.4 Moisture content of horizontal protective membrane and components thereof . 44 Annex C (normative) Test method to the smouldering fire (slow heating curve) . 45 DIN EN 13381-1:2014-12 EN 13381-1:2014 (E) 4 C.1 Introduction 45 C.2 Test equipment 4

27、5 C.3 Test specimens 45 C.4 Termination of test 45 C.5 Evaluation of the results . 45 Bibliography 47 DIN EN 13381-1:2014-12 EN 13381- 1:2014 (E) 5 Foreword This document (EN 13381-1:2014) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is hel

28、d by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2015 and conflicting national standards shall be withdrawn at the latest by March 2015. Attention is drawn to the possibility that s

29、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13381-1:2005. The main changes with respect to the previous edition are listed below: Clarificatio

30、ns regarding the following items: a) preparation of the test specimen (no more opening within the floor); b) instrumentation of the test specimen (no more steel plate within the cavity); c) limits of applicability (several tables depending on the tested configuration). This document has been prepare

31、d under a mandate given to CEN by the European Commission and the European Free Trade Association. This standard is one of a series of standards for evaluating the contribution to the fire resistance of structural members by applied fire protection materials. The other parts of this series are: Part

32、 2: Vertical protective membranes, Part 3: Applied protection to concrete members, Part 4: Applied passive protection to steel members, Part 5: Applied protection to concrete/profiled sheet steel composite members, Part 6: Applied protection to concrete filled hollow steel columns, Part 7: Applied p

33、rotection to timber members, Part 8: Applied reactive protection to steel members. The fire protection capacity of the horizontal protective membrane can be nullified by the presence of combustible materials in the cavity above the membrane. The applicability of the results of the assessment is limi

34、ted according to the quantity and position of such combustible materials within that cavity. The amount of combustible material permissible in the cavity should be given in national regulations. Caution: The attention of all persons concerned with managing and carrying out this fire resistance test,

35、 is drawn to the fact that fire testing can be hazardous and that there is a possibility that toxic and/or harmful smoke and gases can be evolved during the test. Mechanical and operational hazards can also arise during the construction of test elements or structures, their testing and the disposal

36、of test residues. DIN EN 13381-1:2014-12 EN 13381-1:2014 (E) 6 An assessment of all potential hazards and risks to health shall be made and safety precautions shall be identified and provided. Written safety instructions shall be issued. Appropriate training shall be given to relevant personnel. Lab

37、oratory personnel shall ensure that they follow written safety instructions at all times. The specific health and safety instructions contained within this European Standard shall be followed. WARNING: When performing this test method, laboratories shall expect that there may be significant quantiti

38、es of smoke released. This smoke release is expected to be very significant where the fire test involves timber and timber based components. Laboratories shall ensure that appropriate smoke extraction facilities are provided. According to the CEN-CENELEC Internal Regulations, the national standards

39、organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

40、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13381-1:2014-12 EN 13381- 1:2014 (E) 7 1 Scope This European Standard specifies a test method for determining the ability of a horizontal protective membr

41、ane, when used as a fire resistant barrier, to contribute to the fire resistance of standard horizontal structural building members as defined in 6.4.2. Test of horizontal protective membrane installed under a specific non-standard floor should be tested according to EN 1365-2. This European Standar

42、d contains the fire test which specifies the tests which are carried out whereby the horizontal protective membrane, together with the structural member to be protected, is exposed to a fire test according to the procedures defined herein. The fire exposure, to the temperature/time curve given in EN

43、 1363-1, is applied from below the membrane itself. The test method makes provision, through specified optional additional procedures, for the collection of data which can be used as direct input to the calculation of fire resistance according to the processes given within EN 1992-1-2, EN 1993-1-2,

44、EN 1994-1-2 and EN 1995-1-2. This European Standard also contains the assessment which provides information relative to the analysis of the test data and gives guidance for the interpretation of the results of the fire test, in terms of loadbearing capacity criteria of the protected horizontal struc

45、tural member. In special circumstances, where specified in national building regulations, there can be a need to subject the protection material to a smouldering curve. The test for this and the special circumstances for its use are detailed in Annex C. The limits of applicability of the results of

46、the assessment arising from the fire test are defined, together with permitted direct application of the results to different structures, membranes and fittings. This European Standard applies only where there is a gap and a cavity between the horizontal protective membrane and the structural buildi

47、ng member. Otherwise, the test methods in prEN 13381-3, EN 13381-4 or prEN 13381-5, as appropriate, apply. Tests should be carried out without additional combustible materials in the cavity. Annex A gives details of assessing the performance of the ceiling when exposed to a semi-natural fire. 2 Norm

48、ative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1:2012, Fire resistance tests - Part 1: General Requirements EN 1363-2, Fire resistance tests - Part 2: Alternative and additional procedures EN 1992-1-1, Eurocode 2: Design of concrete structures - Part 1-1: Gen