DIN EN 13232-7-2012 Railway applications - Track - Switches and crossings - Part 7 Crossings with moveable parts German version EN 13232-7 2006+A1 2011《轨道交通 铁道 道岔 第7部分 具有可移动部件的道岔 德.pdf

《DIN EN 13232-7-2012 Railway applications - Track - Switches and crossings - Part 7 Crossings with moveable parts German version EN 13232-7 2006+A1 2011《轨道交通 铁道 道岔 第7部分 具有可移动部件的道岔 德.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13232-7-2012 Railway applications - Track - Switches and crossings - Part 7 Crossings with moveable parts German version EN 13232-7 2006+A1 2011《轨道交通 铁道 道岔 第7部分 具有可移动部件的道岔 德.pdf（69页珍藏版）》请在麦多课文档分享上搜索。

1、January 2012 Translation by DIN-Sprachendienst.English price group 23No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 93.100!$y+=“1860826www.din.deDDIN EN 13232-7Railway applications Track Switches and crossings Part 7: Crossings with moveable parts(includes Amendment A1:2011)English translation of DIN EN 13232-7:2012-01Bahnanwendungen Oberbau Weichen und Kreuzungen Teil 7: Herzstcke mit beweglichen Bauteilen Eng

3、lische bersetzung von DIN EN 13232-7:2012-01Applications ferroviaires Voie Appareils de voie Partie 7: Coeurs parties mobiles (Amendement A1:2011 inclus)Traduction anglaise de DIN EN 13232-7:2012-01SupersedesDIN EN 13232-7:2006-06www.beuth.deDocument comprises 69 pagesIn case of doubt, the German-la

4、nguage original shall be considered authoritative.(enthlt nderung A1:2011)12.11 DIN EN 13232-7:2012-01 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 256 “Railway applications” (Secretariat: DIN, Germany). The responsible Germ

5、an body involved in its preparation was the Normenausschuss Fahrweg und Schienenfahrzeuge (Railway Standards Committee), Working Committee NA 087-00-01-05 UA Weichen und Kreuzungen. Amendments This standard differs from DIN EN 13232-7:2006-06 as follows: a) Annex ZA (informative) “Relationship betwe

6、en this European Standard and the Essential Requirements of EU Directive 2008/57/EC” has been included. Previous editions DIN EN 13232-7: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13232-7:2006+A1 October 2011 ICS 93.100 Supersedes EN 13232-7:2006English Version Railway application

7、s - Track - Switches and crossings - Part 7: Crossings with moveable parts Applications ferroviaires - Voie - Appareils de voie - Partie 7: Curs parties mobiles Bahnanwendungen - Oberbau - Weichen und Kreuzungen -Teil 7: Herzstcke mit beweglichen Bauteilen This European Standard was approved by CEN

8、on 9 January 2006 and includes Amendment 1 approved by CEN on 13 September 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b

9、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res

10、ponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,

11、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Mana

12、gement Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13232-7:2006+A1:2011: EEN 13232-7:2006+A1:2011 (E) 2 Contents Page Foreword 4Introduction .61 Scope 72 Normative references 73 Ty

13、pes of crossing with moveable parts 83.1 Common crossings with moveable parts .83.2 Obtuse crossings with moveable parts .83.3 Materials .93.4 Geometry 93.5 Inclination of the running table 93.6 Construction .93.7 Relationship with the adjacent track .94 Terms and definitions 104.1 Common crossing w

14、ith moveable point (Figure 7) . 104.2 Common crossing with moveable wing rails (Figure 8) . 114.3 Obtuse crossing with moveable parts (Figure 9) 125 Design requirements 135.1 Geometrical data . 135.2 Rolling stock data . 145.2.1 Maximum axle load . 145.2.2 Maximum speed 145.2.3 Wheel profile, diamet

15、er, back to back and wheel set dimensions 145.2.4 Note 145.3 Supports and fastenings 145.4 Interface between crossing with moveable parts and operating system . 155.5 Transfer of longitudinal track forces 155.6 Other requirements. 155.7 Drawings 156 Tolerances and inspection 156.1 General . 156.2 To

16、ols and instruments . 166.3 Critical dimensions . 166.3.1 General . 166.3.2 Critical dimensions for common crossings with moveable point . 166.3.3 Critical dimensions for common crossings with moveable wing rails . 166.3.4 Critical dimensions for obtuse crossings with moveable parts 166.4 Certificat

17、ion . 166.5 Methods of examination for structural defects . 176.5.1 Visual . 176.5.2 Dye penetrant and/or magnetic particle . 176.5.3 Ultrasound . 176.5.4 Radiography 177 Limits and extent of supply . 178 Identification marks 17DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 3 Annex ZA (informati

18、ve) !Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC“ 64Bibliography 67DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 4 Foreword This document (EN 13232-7:2006+A1:2011) has been prepared by Technical Committee CEN/TC 256 “Railway applications

19、”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the latest by April 2012. !This doc

20、ument has been prepared under a mandate given to CEN/CENELEC/ETSI by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of

21、this document.“ This document includes Amendment 1, approved by CEN on 2011-09-13. This document supersedes EN 13232-7:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. Attention is drawn to the possibility that some of the elements of this d

22、ocument may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This series of standards “Railway applications Track Switches and crossings” covers the design and quality of switches and crossings in flat bottom rails. The

23、list of parts is as follows: Part 1 : Definitions Part 2 : Requirements for geometric design Part 3 : Requirements for wheel/rail interaction Part 4 : Actuation, locking and detection Part 5 : Switches Part 6 : Fixed common and obtuse crossings Part 7 : Crossings with moveable parts Part 8 : Expansi

24、on devices Part 9 : Layouts Part 1 contains terminology used throughout all parts of the standard. Parts 2 to 4 contain basic design guides and are applicable to all switch and crossing assemblies. Parts 5 to 8 deal with particular types of equipment, including their tolerances. These use parts 1 to

25、 4 as a basis. DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 5 Part 9 defines the functional and geometrical dimensions and tolerances for layout assembly. The following terms are used within to define the parties involved in using the EN as the technical basis for a transaction: CUSTOMER The o

26、perator or user of the equipment, or the purchaser of the equipment on the users behalf. SUPPLIER The body responsible for the use of the EN in response to the customers requirements. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries a

27、re bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

28、pain, Sweden, Switzerland and United Kingdom. DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 6 Introduction The requirements of crossings with moveable parts are that they are capable of performing their intended purpose, which is to allow a vehicle to pass the area where the two rails cross wit

29、h a continuous running edge. That means the wheels of the vehicle are fully supported and guided in the whole crossing area, either in the facing or trailing direction. The main criteria for the selection of crossings with moveable parts are: improvement of ride comfort; reduction of noise and vibra

30、tion; reduction of maintenance; mixed traffic conditions (e.g. train/tram); security against derailment. This last point is particularly important (critical) in diamond crossings. Effectively, as the wheel diameter and the obtuse crossing angle decrease, the distance without guidance (EN 13232-3:200

31、3, 4.2.5) increases. Therefore, to assure the safety of running of the wheel set over the diamond crossing, it is sometimes necessary to design the obtuse crossing as moveable. Rules and recommendations for security against derailment in diamond crossings are set down in part 9 of this standard. The

32、 crossings with moveable parts shall be designed to withstand all external forces from rolling stock, thermal influences etc. The customer shall specify the maximum strains or stresses due to external thermal forces that the crossing with moveable parts has to withstand. Operating, signalling system

33、s, heater systems, load bearing supports, maintainability and safety are all major factors which should be taken into account during the design. The performance criteria shall be based on information given by the customer. The design and selection of types of crossings with moveable parts will be in

34、fluenced by axle loads, frequency of traffic and speed. DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 7 1 Scope The scope of this part is: to establish a working terminology for crossings with moveable parts, which means crossings with moveable parts to close the gap of the running edge, and th

35、eir constituent parts, and identify the main types; to list the minimum informative requirements for the manufacture of crossings with moveable parts and/or their constituent parts; to formulate codes of practice for inspection and tolerances for crossings with moveable parts and/or their constituen

36、t parts; to establish the limits and extent of supply; to list the method by which crossings with moveable parts and their constructional parts should be identified and traced; to list the different and varying ways by which crossings with moveable parts can be described, using the following paramet

37、ers: geometry of crossings; types of construction; performance requirements; design criteria; tolerances and inspection. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. Fo

38、r undated references, the latest edition of the referenced document (including any amendments) applies. EN 13145, Railway applications Track Wood sleepers and bearers EN 13146 (all parts), Railway applications Track Test methods for fastening systems EN 13230 (all parts), Railway applications Track

39、Concrete sleepers and bearers EN 13232-1, Railway applications Track Switches and crossings Part 1: Definitions EN 13232-2, Railway applications Track Switches and crossings Part 2: Requirements for geometric design EN 13232-4, Railway applications Track Switches and crossings Part 4: Actuation, loc

40、king and detection prEN 13232-9, Railway applications Track Switches and crossings Part 9: Layouts EN 13481 (all parts), Railway applications Track Performance requirements for fastening systems DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 8 EN 13674-1, Railway applications Track Rail Part 1:

41、Vignole railway rails 46 kg/m and above EN 13674-2, Railway applications Track Rail Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above prEN 13674-3, Railway applications Track Rail Part 3: Check rails EN 13674-4, Railway applications Track Rail Part 4:

42、 Vignole railway rails from 27 kg/m to, but excluding 46 kg/m UIC 866, Technical specification for the supply of cast manganese steel crossings for switch and crossing work 3 Types of crossing with moveable parts 3.1 Common crossings with moveable parts There are two major types of common crossing w

43、ith moveable parts. These are crossing with moveable point (see Figure 1) and crossing with moveable wing rails (see Figure 2). In both cases: The wings and vee support can be: saddle (cast, welded, machined); assembled (made of different rail profiles, e.g. standard rail, asymmetric low section, sy

44、mmetric thick web section etc.). The vee can be: monobloc (cast, welded, machined); assembled (made of different rail profiles, e.g. standard rail, asymmetric low section, symmetric thick web section etc.). Rail profiles shall be according to EN 13674-1 and EN 13674-2. In the case of a crossing with

45、 moveable point: point may or may not contain a longitudinal sliding area; vee of point and splice rail may be coupled by bolting, welding or fabricated out of a monobloc and welded to their respective adjacent legs. For example see Figures 3, 4 and 5. In the case of a crossing with moveable wing ra

46、ils a longitudinal sliding area is not required. Other types of construction and their requirements shall be agreed between customer and supplier. 3.2 Obtuse crossings with moveable parts The main type of obtuse crossing with moveable parts is the switch diamond crossing (see Figure 6). The wing and

47、 switches rails support can be: DIN EN 13232-7:2012-01 EN 13232-7:2006+A1:2011 (E) 9 saddle (cast, welded, machined); assembled (made of different rail profiles, e.g. standard rail, asymmetric low section, symmetric thick web section etc.). The wing rail can be: monobloc (cast, welded, machined); assembled (made of different rail profiles, e.g. standard rail, asymmetric low section, symmetric thick web section etc.). Switch diamond crossings can be used in obtuse crossings with or without single or double slips. Rail profile