DIN EN 13168-2015 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification German version EN 13168 2012+A1 2015《建筑物用热隔绝产品 工厂制木丝(WW)产品 规格 德文版.pdf

《DIN EN 13168-2015 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification German version EN 13168 2012+A1 2015《建筑物用热隔绝产品 工厂制木丝(WW)产品 规格 德文版.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13168-2015 Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification German version EN 13168 2012+A1 2015《建筑物用热隔绝产品 工厂制木丝(WW)产品 规格 德文版.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、April 2015 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!%B3“2311657www.din.deDDIN EN 13168Thermal insulation products for buildings Factory made wood wool (WW) products Specification;English version EN 13168:2012+A1:2015,English translation of DIN EN 13168:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Holzwolle (WW) Spezifika

3、tion;Englische Fassung EN 13168:2012+A1:2015,Englische bersetzung von DIN EN 13168:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en laine de bois (WW) Spcification;Version anglaise EN 13168:2012+A1:2015,Traduction anglaise de DIN EN 13168:2015-04SupersedesDIN EN 13168:2013

4、-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 51 pages 03.15 DIN EN 13168:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-04-01. It sho

5、uld be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this

6、standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13168:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journ

7、al of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13168:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its

8、 preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This standard includes Amen

9、dment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13168:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or altered by amendment is indica

10、ted in the text by tags !and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13168:2013-03 as follows: a) an addition to the Foreword has been introduced; b) Subclause 3.2

11、“Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.12 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking and labelling” has been modified; f) Annex B “Product

12、 type determination (PTD) and factory production control (FPC)” has been modified; g) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN 1101: 1938-09, 1952x-01, 1960-10, 1970-04, 1980-03, 1989-11, 2

13、000-06 DIN 1104-1: 1970-04, 1980-03 DIN EN 13168: 2001-10, 2009-02, 2013-03 DIN EN 13168/A1: 2004-08 DIN EN 13168 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13168:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13168:2012English Version Thermal insulation products

14、for buildings - Factory made wood wool (WW) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en laine de bois (WW) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Holzwolle (WW) - Spezifikation This European Standard was approved

15、 by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date list

16、s and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

17、the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yug

18、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPE

19、N DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13168:2012+A1:2015 EEN 13168:2012+A1:2015 (E) 2 Contents Page F

20、oreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .7 3.1 Terms and definitions .7 3.2 Symbols, units and abbreviated terms 9 4 Requirements 11 4.1 General . 11 4.2 For all applications . 11 4.3 For specific applications 15 5 Test methods . 19 5.1

21、 Sampling 19 5.2 Conditioning 19 5.3 Testing . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Type Determination (PTD) . 22 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determ

22、ination of the declared values of thermal resistance and thermal conductivity . 25 A.1 General . 25 A.2 Input data . 25 A.3 Declared values. 25 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 28 Annex C (normative) WW multi-layered insulation products

23、32 C.1 General . 32 C.2 Requirements 32 C.3 Test methods . 33 C.4 Evaluation of conformity 33 Annex D (normative) Specific test methods 34 D.1 Chloride content . 34 D.2 Load resistance. 34 D.3 Impact resistance 35 Annex E (normative) Determination of the thermal conductivity in relation to moisture

24、content. 37 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 39 ZA.1 Scope and relevant characteristics 39 DIN EN 13168:2015-04 EN 13168:2012+A1:2015 (E) 3 ZA.2 Procedures for AVCP of factory made wood wool products 40 ZA

25、.3 CE Marking and labelling 47 Bibliography 49 Tables Table 1 Classes for length and width tolerances . 12 Table 2 Classes for thickness tolerances . 13 Table 3 Levels for deviation from flatness 13 Table 4 Levels for chloride content . 13 Table 5 Levels for tensile strength perpendicular to faces .

26、 14 Table 6 Levels for the deviation from squareness . 15 Table 7 Levels for compressive stress or compressive strength. 16 Table 8 Levels for bending strength 17 Table 9 Levels for short term water absorption 17 Table 10 Test methods, test specimens and conditions . 20 Table A.1 Values for k for on

27、e sided 90 % tolerance interval with a confidence level of 90 % . 27 Table B.1 Minimum product testing frequencies 28 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics (1 of 2) 30 Table ZA.1 Relevant clauses for factory made wood wool and intended use . 39 Table

28、ZA.2 Systems of AVCP . 41 Table ZA.3.1 Assignment of AVCP tasks for factory made wood wool products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 41 Table ZA.3.2 Assignment of AVCP tasks for factory made wood wool products under system 3 (see Table ZA.2) . 43 Table ZA.3.3 Assig

29、nment of AVCP tasks for factory made wood wool products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure D.1 Test rig for load resistance of slabs . 35 Figure D.2 Test rig for impact resistance of slabs . 36 Figure E.1 Example of a graphic representation o

30、f “f” . 38 Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3“ . 48 DIN EN 13168:2015-04 EN 13168:2012+A1:2015 (E) 4 Foreword This document (EN 13168:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the

31、 secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention i

32、s drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13168:2012“. This document includes Amendment 1 approved by CEN on 2

33、014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !Fo

34、r relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13168:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requ

35、irements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addition of information on some specific items such as for MW: lamella, compressibility, etc; d) addition of links to EN 15715, Thermal insulation products Instructi

36、on for mounting and fixing for reaction to fire testing Factory made products; e) changes of Annex ZA. !Amendment 1 modifies EN 13168:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amen

37、dment introduces f) an addition to the foreword; g) an addition in 3.2; h) an addition in 4.3.12; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; DIN EN 13168:2015-04 EN 13168:2012+A1:2015 (E) 5 l) a new Annex ZA.“ This standard is one of a series of standards f

38、or insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of in

39、terrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Fact

40、ory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 1

41、3166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products

42、Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factor

43、y made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the na

44、tional standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

45、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13168:2015-04 EN 13168:2012+A1:2015 (E)6 1 Scope This European Standard specifies the requirements for factory made wood wool (WW) produc

46、ts, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or slabs. This European Standard also specifies the requirements for the factory made composite products, made from wood wool in combination with other

47、 insulation materials. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this European Standard are also used in prefabricated thermal insulation systems and composite panels; the perform

48、ance of systems incorporating these products is not covered. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels and classes required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,15 m2K/W or a declared thermal conductivity greater t