DIN EN 13167-2015 en 3348 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification German version EN 13167 2012+A1 2015《建筑物隔热产品 工厂制泡沫玻璃.pdf

《DIN EN 13167-2015 en 3348 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification German version EN 13167 2012+A1 2015《建筑物隔热产品 工厂制泡沫玻璃.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13167-2015 en 3348 Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification German version EN 13167 2012+A1 2015《建筑物隔热产品 工厂制泡沫玻璃.pdf（49页珍藏版）》请在麦多课文档分享上搜索。

1、April 2015 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!%B3“2311656www.din.deDDIN EN 13167Thermal insulation products for buildings Factory made cellular glass (CG) products Specification;English version EN 13167:2012+A1:2015,English translation of DIN EN 13167:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Schaumglas (CG) Spe

3、zifikation;Englische Fassung EN 13167:2012+A1:2015,Englische bersetzung von DIN EN 13167:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en verre cellulaire (CG) Spcification;Version anglaise EN 13167:2012+A1:2015,Traduction anglaise de DIN EN 13167:2015-04SupersedesDIN EN 1

4、3167:2013-03See start of applicationwww.beuth.deDocument comprises 49 pagesIn case of doubt, the German-language original shall be considered authoritative.03.15DIN EN 13167:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-04-01.

5、 It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users o

6、f this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13167:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid down in the Officia

7、l Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13167:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved

8、 in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmmstoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This standard include

9、s Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13167:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or altered by amendment is

10、indicated in the text by tags !and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13167:2013-03 as follows: a) an addition to the Foreword has been introduced; b) Subclaus

11、e 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.12 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking and labelling” has been modified; f) Annex B “P

12、roduct type determination (PTD) and factory production control (FPC)” has been modified; g) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN 18174: 1981-01 DIN EN 13167: 2001-10, 2009-02, 2013-03 D

13、IN EN 13167/A1: 2004-08 DIN EN 13167 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13167:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13167:2012English Version Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification Pro

14、duits isolants thermiques pour le btiment - Produits manufacturs en verre cellulaire (CG) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Schaumglas (CG) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN o

15、n 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards

16、may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

17、d to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

18、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manage

19、ment Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13167:2012+A1:2015 EEN 13167:2012+A1:2015 (E) 2 Contents Page Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, s

20、ymbols, units and abbreviated terms .7 4 Requirements 11 5 Test methods . 17 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 20 8 Marking and labelling . 21 Annex A (normative) Determination of the declared values of thermal resistance and thermal conduct

21、ivity . 23 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 25 Annex C (normative) CG multi-layered insulation products . 29 Annex D (informative) Additional properties 31 Annex E (informative) Preparation of the test specimens to measure thermal conduc

22、tivity . 34 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation“ 36 Bibliography . 47 Tables Table 1 Dimensional stability under specified conditions 13 Table 2 Levels for compressive strength . 14 Table 3 Levels for bending

23、strength . 15 Table 4 Levels for deformation under point load . 15 Table 5 Test methods, test specimens and conditions. 18 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 24 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequen

24、cies . 25 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 27 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 32 Table ZA.1 Relevant clauses for factory made cellular glass and intended use 36 Table ZA.2 Systems of AVCP . 38

25、Table ZA.3.1 Assignment of AVCP tasks for factory made cellular glass products under system 1 for reaction to fire and system 3 (see Table ZA.2) 38 Table ZA.3.2 Assignment of AVCP tasks for factory made cellular glass products under system 3 (see Table ZA.2) 40 DIN EN 13167:2015-04 EN 13167:2012+A1:

26、2015 (E) 3 Table ZA.3.3 Assignment of AVCP tasks for factory made cellular glass products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 41 Figures Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 46 DIN EN 13167:2015-04 EN 13167:201

27、2+A1:2015 (E) 4 Foreword This document (EN 13167:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an

28、 identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

29、 held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Re

30、gulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document supersedes !EN 13167:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Comp

31、ared with EN 13167:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and add

32、ition of information on some specific items, such as point load (move towards 4.3); compressive strength (additional levels); bending strength (additional levels); d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory

33、made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13167:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addit

34、ion in 3.2; h) a new subclause 4.3.12; i) modification of Clause 7; j) modification of Clause 8; DIN EN 13167:2015-04 EN 13167:2012+A1:2015 (E) 5 k) modification of Annex B; l) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in buildings but this s

35、tandard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of facto

36、ry made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specifi

37、cation EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Fact

38、ory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products

39、for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The re

40、duction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following coun

41、tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

42、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13167:2015-04 EN 13167:2012+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made cellular glass (CG) products, with or without facings or coatings, which

43、 are used for the thermal insulation of buildings. The products are manufactured in the form of boards or slabs. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. T

44、his standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The l

45、evels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,50 m2K/W or a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This standard does not cover in

46、 situ insulation products and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14305). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appli

47、cation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products

48、for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826:1996, Thermal insulating products for building applications De

49、termination of compression behaviour EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/ 50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep