DIN EN 12629-1-2011 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1 Common requirements German version EN 12629-1 2000+.pdf

《DIN EN 12629-1-2011 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1 Common requirements German version EN 12629-1 2000+.pdf》由会员分享，可在线阅读，更多相关《DIN EN 12629-1-2011 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1 Common requirements German version EN 12629-1 2000+.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、January 2011 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 91.220!$l=“1739626www.din.deDDIN EN 12629-1Machines for the manufacture of constructional products from concreteand calcium-silicate Safety Part 1: Common requirements (includes Amendment A1:2010)English translation of DIN EN 12629-1:2011-01Maschinen fr die Herstellung von Bauprodukten aus Beton u

3、nd Kalksandsteinmassen Sicherheit Teil 1: Gemeinsame Anforderungen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 12629-1:2011-01Machines pour la fabrication de produits de construction en bton et silico-calcaire Scurit Partie 1: Exigences communes (Amendement A1:2010 inclus)Traduction angl

4、aise de DIN EN 12629-1:2011-01SupersedesDIN EN 12629-1:2001-01See start of applicationwww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritative.3212.10 DIN EN 12629-1:2011-01 A comma is used as the decimal marker. Start of application The st

5、art of application of this standard is 1 January 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German bo

6、dy involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-10 AA Betonsteinmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of concrete block making machines, and of the empl

7、oyers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissio

8、ned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume comp

9、liance with the requirements of the Machinery Directive (“presumption of conformity”). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. The European S

10、tandards referred to in Clause 2 and the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 12629-1:2001-01 as follows: a) the foreword has been modified; b) the introduction has bee

11、n updated; c) Clause 1 “Scope” has been modified and updated; d) Clause 2 “Normative references” has been updated; e) Clause 3 “Terms and definitions” has been updated; f) Clause 4 “List of significant hazards” has been modified and updated; 2 DIN EN 12629-1:2011-01 g) Clause 5 “Safety requirements

12、and/or protective measures” has been modified and updated, requirements for travelling functions controlled by remote control (5.3.8) and requirements related to noise (5.7) have been included; h) Clause 6 “Verification of safety measures and/or provisions” has been modified and updated; i) Clause 7

13、 “Information for use” has been modified and updated; j) Clause 8 “Marking” has been modified and updated; k) Annex B “Guarding examples” has been modified and updated; l) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” h

14、as been updated. Previous editions DIN EN 12629-1: 2001-01 3 DIN EN 12629-1:2011-01 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12629-1:2000+A1 September 2010 ICS 91.220 Supersedes EN 12629-1:2000English Version Machines for the manufacture of construction

15、al products from concrete and calcium-silicate - Safety - Part 1: Common requirements Machines pour la fabrication de produits de construction en bton et silico-calcaire - Scurit - Partie 1: Exigences communes Maschinen fr die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherhe

16、it - Teil 1: Gemeinsame Anforderungen This European Standard was approved by CEN on 12 May 2000 and includes Amendment 1 approved by CEN on 5 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st

17、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German).

18、 A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Cz

19、ech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EU

20、ROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12629-1:2000+A1:2010: EEN 12629-1:2000+A1:2010 (E) Contents Foreword 4I

21、ntroduction . 51 Scope 52 Normative references 53 !Terms and definitions“ . 74 List of significant hazards 94.1 Mechanical hazards . 94.2 Electrical hazards 94.3 Hazards generated by noise . 94.4 Hazards generated by materials and products . 94.5 Hazards generated by neglecting ergonomic principles

22、. 94.6 Hazards caused by failure of energy supply 95 !Safety requirements and/or protective measures“ . 95.1 Mobile parts of power transmission 105.2 Mobile parts taking part in the working process 105.3 Tool-setting changing of tools and machine maintenance operations . 125.4 Safety functions treat

23、ment by control networks 135.5 Warning equipment . 135.6 Electrical equipment 135.7 Noise . 135.8 Materials and products . 145.9 Ergonomic design 145.10 Hydraulic and pneumatic equipment . 145.11 Integrated transport systems that are an integral part of the machine . 145.12 !Additional requirements

24、for mobile manufacturing machines“ 146 Verification of safety measures and/or provisions 167 Information for use 177.1 Safety systems . 177.2 Interface 187.3 Spare parts . 187.4 Noise . 187.5 Access 187.6 Storage 187.7 Oils 188 Marking . 19DIN EN 12629-1:2011-01 2EN 12629-1:2000+A1:2010 (E) Annex A

25、(informative) Examples of machines for the manufacture of constructional products from concrete and calcium silicate . 20Annex B (informative) Guarding examples . 22Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 27!Bib

26、liography“ . 28DIN EN 12629-1:2011-01 3EN 12629-1:2000+A1:2010 (E) Foreword This document (EN 12629-1:2000+A1:2010) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shal

27、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document

28、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2010-08-05. This document supersedes EN 12629-1:2000. The start and finish of text introduced or altered by ame

29、ndment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex

30、ZA, which is an integral part of this standard. !The series “Machines for the manufacture of constructional products from concrete and calcium silicate Safety“ consists of the following parts: Part 1: Common requirements Part 2: Block making machines Part 3: Slide and turntable machines Part 4: Conc

31、rete roof tile making machines Part 5.1: Pipe making machines manufacturing in the vertical axis Part 5.2: Pipe making machines manufacturing in the horizontal axis Part 5.3: Pipe prestressing machines Part 5.4: Concrete pipe coating machines Part 6: Stationary and mobile equipment for the manufactu

32、re of precast reinforced products Part 7: Stationary and mobile equipment for long line manufacture of prestressed products Part 8: Machines and equipment for the manufacture of constructional products from calcium silicate (and concrete)“ !deleted text“ According to the CEN/CENELEC Internal Regulat

33、ions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

34、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12629-1:2011-01 4EN 12629-1:2000+A1:2010 (E) Introduction This European Standard is a Type C-standard as stated in !EN ISO 12100“. The machinery concerned and the extent to whi

35、ch hazards, hazardous situations and events are covered are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other sta

36、ndards, for machines that have been designed and built according to the provisions of this type C standard. Reference to pertinent standards mentioned above is made where requirements of such standards are relevant. 1 Scope 1.1 This European Standard applies to machines for the manufacture of constr

37、uctional products from concrete and/or calcium silicate examples of which are listed in annex A of this part. It gives concepts and general and common requirements for the design, operation and maintenance of such machines. 1.2 !This European Standard deals with hazards listed in Clause 4 which can

38、arise during the operation and maintenance, including the interfaces, of the machines for the manufacture of constructional products from concrete and calcium silicate, when carried out as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. Part 2 to 8 of th

39、is standard give additional specific requirements and therefore have to be applied together with this part.“ 1.3 The preparation of concrete and/or calcium-silicate mixture and the transport from the mixer to the manufacturing plant are not part of this European Standard (see !EN 12151:2007“). The e

40、quipment for the transport and handling of formed products, other than the integrated transport system, is not covered by this standard. !deleted text“ !1.4“ At the time of drafting, machine specific noise test codes for !EN 12629-2 to -8“ are not available to fulfill the requirements of 5.7.2 and 7

41、.4.2. When they are available, they will be incorporated in these standards. !1.5 This document is not applicable to machines for the manufacture of constructional products from concrete and/or calcium silicate, which are manufactured before the date of publication of this document by CEN.“ 2 Normat

42、ive references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349:1993+A1:2008, Safety of ma

43、chinery Minimum gaps to avoid crushing of parts of the human body EN 457:1992, Safety of machinery Auditory danger signals General requirements, design and testing EN 547-1:1996+A1:2008, Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openin

44、gs for whole body access into machinery EN 547-2+A1:2008, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings EN 547-3:1996+A1:2008, Safety of machinery Human body measurements Part 3: Anthropometric data DIN EN 12629-1:2011-01 5

45、EN 12629-1:2000+A1:2010 (E) EN 574, Safety of machinery Two hand control devices Functional aspects Principles for design EN 614-1:2006+A1:2009, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 626-1:1994+A1:2008, Safety of machinery Reduction of risks to

46、 health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers EN 894-1, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control

47、actuators EN 894-2, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 953:1997+A1:2009, Safety of machinery

48、Guards General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery Safety-related parts of control systems Part 1: General principles for design EN 982:1996+A1:2008, Safety of machinery Safety requirements for fluid power systems and their comp

49、onents Hydraulics EN 983:1996+A1:2008, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics EN 999, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 1088, Saf