DIN EN 124-3-2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3 Gully tops and manhole tops made of steel or aluminium alloys German version EN 124-3 2015.pdf

《DIN EN 124-3-2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3 Gully tops and manhole tops made of steel or aluminium alloys German version EN 124-3 2015.pdf》由会员分享，可在线阅读，更多相关《DIN EN 124-3-2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3 Gully tops and manhole tops made of steel or aluminium alloys German version EN 124-3 2015.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、September 2015 Translation by DIN-Sprachendienst.English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

2、ICS 93.080.30!%E8“2349221www.din.deDDIN EN 124-3Gully tops and manhole tops for vehicular and pedestrian areas Part 3: Gully tops and manhole tops made of steel or aluminium alloys;English version EN 124-3:2015,English translation of DIN EN 124-3:2015-09Aufstze und Abdeckungen fr Verkehrsflchen Teil

3、 3: Aufstze und Abdeckungen aus Stahl oder Aluminiumlegierungen;Englische Fassung EN 124-3:2015,Englische bersetzung von DIN EN 124-3:2015-09Dispositifs de couronnement et de fermeture pour les zones de circulation utilises par lespitons et les vhicules Partie 3: Dispositifs de couronnement et de fe

4、rmeture en acier ou alliage daluminium;Version anglaise EN 124-3:2015,Traduction anglaise de DIN EN 124-3:2015-09Together with DIN EN 124-1:2015-09, DIN EN 124-2:2015-09, DIN EN 124-4:2015-09, DIN EN 124-5:2015-09and DIN EN 124-6:2015-09 supersedes DIN EN 124:1994-08See start of applicationSupersede

5、s: see belowwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 40 pages 08.15 DIN EN 124-3:2015-09 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-09-01. It should be noted th

6、at, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should

7、 refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 124:1994-08, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the Europea

8、n Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 124-3:2015) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering” (Secretariat: DIN, Germany). The preliminary work was done by Working Group WG 4 “Manhole tops, gully tops, draina

9、ge channels and other ancillary components for use outside buildings”. The responsible German body involved in its preparation was the DIN-Normenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Committee NA 119-05-01 AA Entwsserungsgegenstnde. When placing manhole tops and gul

10、ly tops on the German market, the performance of the following essential characteristics shall be stated: reaction to fire; frame bearing area; load-bearing capacity; permanent set; securing of covers/gratings within the frame; skid resistance; durability of load-bearing capacity against mechanical

11、failure, securing against unintended lifting, skid resistance against loss of grip. Methods used in Germany for securing the cover or grating within the frame are given in the national standard DIN 1229. DIN EN 124-3:2015-09 3 Amendments This standard differs from DIN EN 124:1994-08 as follows: a) t

12、he standard has been split into 6 parts with Part 1 containing general design and performance requirements and Parts 2 to 6 performance requirements for manhole tops and gully tops made of specific materials; b) test methods for specific materials have been added. Previous editions DIN 1229: 1939-08

13、, 1941-01, 1953-09, 1956x-08, 1964-09 DIN 1213: 1941-10, 1952-08, 1964-09 DIN 1213-1: 1973-05 DIN 1213-2: 1973-05 DIN 1229-1: 1973-05 DIN 1229-2: 1973-05 DIN EN 124: 1986-06, 1994-08 DIN EN 124-3:2015-09 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 124-3 Ju

14、ne 2015 ICS 93.080.30 Supersedes EN 124:1994English Version Gully tops and manhole tops for vehicular and pedestrian areas -Part 3: Gully tops and manhole tops made of steel or aluminium alloys Dispositifs de couronnement et de fermeture pour les zones de circulation utilises par les pitons et les v

15、hicules - Partie 3: Dispositifs de couronnement et de fermeture en acier ou alliage daluminium Aufstze und Abdeckungen fr Verkehrsflchen - Teil 3: Aufstze und Abdeckungen aus Stahl oder Aluminiumlegierungen This European Standard was approved by CEN on 12 March 2015. CEN members are bound to comply

16、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Ma

17、nagement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

18、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M

19、alta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015

20、CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 124-3:2015 EEN 124-3:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Materials .6 4.1 General 6 4.2 Steel 7 4.2.1 General 7 4.2.2 H

21、ot dip galvanizing 7 4.3 Stainless steel 7 4.4 Aluminium alloy .8 4.5 Cover fillings 8 5 Requirements .8 5.1 Design and performance requirements .8 5.2 Covers with fillings . 10 5.3 Material-specific characteristics for gully tops and manhole tops made of mild steel or aluminium alloys . 10 5.3.1 Re

22、action to fire 10 5.3.2 Durability . 11 5.3.3 Dangerous substances 11 5.4 Additional requirements for gully tops and manhole tops made of steel or aluminium alloys 11 5.4.1 Fabrication . 11 5.4.2 Deflection under load . 12 6 Testing . 12 6.1 General . 12 6.2 Testing of deflection under load . 12 7 A

23、ssessment and verification of constancy of performance - AVCP . 12 7.1 General . 12 7.2 Type testing . 12 7.2.1 General . 12 7.2.2 Test samples, testing and compliance criteria 13 7.2.3 Test reports . 15 7.2.4 Shared other party results . 15 7.3 Factory production control (FPC) . 16 7.3.1 General .

24、16 7.3.2 Requirements 16 7.3.3 Product specific requirements 21 7.3.4 Initial inspection of factory and of FPC 21 7.3.5 Continuous surveillance of FPC . 22 7.3.6 Procedure for modifications 22 7.3.7 One-off products and products produced in very low quantity 22 8 Designation . 23 9 Marking 25 Annex

25、A (normative) Test of deflection under load 26 A.1 Test samples . 26 DIN EN 124-3:2015-09EN 124-3:2015(E)3 A.2 Deflection test load, FD. 26 A.3 Apparatus . 26 A.4 Procedure . 26 A.5 Observations and reporting . 27 Annex ZA (informative) Clauses of this European Standard addressing the provisions of

26、the EU Construction Products Regulation 28 ZA.1 Scope and relevant characteristics . 28 ZA.2 Procedures for AVCP of gully tops and manhole tops made of steel or aluminium alloys 30 ZA.3 CE marking and labelling 34 Bibliography 36 DIN EN 124-3:2015-09EN 124-3:2015(E)4 Foreword This document (EN 124-3

27、:2015) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015 and conf

28、licting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Together wi

29、th EN 124-1:2015, EN 124-2:2015, EN 124-4:2015, EN 124-5:2015 and EN 124-6:2015, this document will supersede EN 124:1994. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Regul

30、ation (EU) No. 305/2011. For relationship with EU Regulation(s), see informative Annex ZA, which is an integral part of this document. EN 124, Gully tops and manhole tops for vehicular and pedestrian areas, consists of the following parts: Part 1: Definitions, classification, general principles of d

31、esign, performance requirements and test methods; Part 2: Gully tops and manhole tops made of cast iron; Part 3: Gully tops and manhole tops made of steel or aluminium alloys; Part 4: Gully tops and manhole tops made of steel reinforced concrete; Part 5: Gully tops and manhole tops made of composite

32、 materials; Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standar

33、d: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain

34、, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 124-3:2015-09EN 124-3:2015 (E) 5 1 Scope This European Standard is applicable to gully tops and manhole tops made of mild steel, stainless steel and aluminium alloys whether in combination with concrete or not, with a clear opening up to a

35、nd including 1 000 mm for covering gullies, manholes and inspection chambers for installation in areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in areas which can only be used by pedestrians and pedal cyclists (at least class A 15), pe

36、destrian areas and comparable areas, car parks or car parking decks (at least class B 125), the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250), carriage

37、ways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400), areas imposing high wheel loads, e.g. docks, aircraft pavements (at least class E 600), areas imposing particularly high wheel loads, e.g. aircraft pavements (class

38、F 900). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of steel or aluminium alloys with frames according to EN 124-2 and EN 124-4, EN 124-5 or EN 124-6. Fabrication of manhole tops and gully top

39、s in accordance with this standard is limited to cold forming, mechanical crimping or welding together component parts made of metal plate, strip or bar or rolled or extruded metal sections. This European Standard is not applicable to: manhole tops and gully tops made of aluminium tread plates for u

40、se in carriageways of roads (class D 400) and areas imposing high wheel loads (Classes E 600 and F 900); concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave gratings for classes F 900 and E 600; gratings/covers as part of prefabricated drainage channels

41、according to EN 1433; floor and roof gullies in buildings which are specified in EN 1253 (all parts); and surface boxes. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, o

42、nly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 124-1:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 1: Definitions, classification, general principles of design, performance requir

43、ements and test methods EN 124-2:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron DIN EN 124-3:2015-09EN 124-3:2015(E)6 EN 124-4:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 4: Gully tops and manho

44、le tops made of steel reinforced concrete EN 124-5:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 5: Gully tops and manhole tops made of composite materials EN 124-6:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 6: Gully tops and manhole tops ma

45、de of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) EN 206:2013, Concrete Specification, performance, production and conformity EN 573-3, Aluminium and aluminium alloys Chemical composition and form of wrought products Part 3: Chemical composition and form of pr

46、oducts EN 1386, Aluminium and aluminium alloys Tread plate Specifications EN 1676:2010, Aluminium and aluminium alloys Alloyed ingots for remelting Specifications EN 1706, Aluminium and aluminium alloys Castings Chemical composition and mechanical properties EN 10025-1, Hot rolled products of struct

47、ural steels Part 1: General technical delivery conditions EN 10088-1:2014, Stainless steels Part 1: List of stainless steels EN 10130, Cold rolled low carbon steel flat products for cold forming Technical delivery conditions EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel artic

48、les Specifications and test methods (ISO 1461) EN ISO 3452-1, Non-destructive testing - Penetrant testing Part 1: General principles (ISO 3452-1) EN ISO 9606-1, Qualification testing of welders Fusion welding Part 1: Steels (ISO 9606-1) EN ISO 9606-2, Qualification test of welders Fusion welding Part 2: Aluminium and aluminium alloys (ISO 9606-2) EN ISO 14554 (all parts), Quality requirements for welding Resistance welding of metallic