DIN EN 1176-10-2008 Playground equipment and surfacing - Part 10 Additional specific safety requirements and test methods for fully enclosed play equipment English version of DIN E.pdf

《DIN EN 1176-10-2008 Playground equipment and surfacing - Part 10 Additional specific safety requirements and test methods for fully enclosed play equipment English version of DIN E.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1176-10-2008 Playground equipment and surfacing - Part 10 Additional specific safety requirements and test methods for fully enclosed play equipment English version of DIN E.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、October 2008DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.200.40!$RSd“1474865

2、www.din.deDDIN EN 1176-10Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods forfully enclosed play equipmentEnglish version of DIN EN 1176-10:2008-10Spielplatzgerte und Spielplatzbden Teil 10: Zustzliche besondere sicherheitstechnische Anforderungen

3、und Prfverfahrenfr vollstndig umschlossene SpielgerteEnglische Fassung DIN EN 1176-10:2008-10SupersedesDIN EN 1176-10:2008-08www.beuth.deDocument comprises 20 pagesDIN EN 1176-10:2008-10 2 Start of validity This standard takes effect on 01 October 2008. National foreword This standard includes in cl

4、ause 4 safety requirements within the meaning of the Gerte- und Produkt-This standard has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the

5、Normenausschuss Sport- und Freizeitgert (Sports Equipment Standards Committee), Technical Committee NA 112-07-01 AA Spielplatzgerte. Playground equipment as specified in this standard falls within the scope of the Gerte- und Produkt-sicherheitsgesetz. Once compliance with the safety requirements spe

6、cified therein has been verified by an accredited test house designated by the German Federal Ministry of Labour and Social Affairs, the playground equipment may be marked with the symbol GS (= geprfte Sicherheit, safety tested). Compared with DIN EN 1176-10:2008-08, the following corrections have b

7、een made to the German version only and therefore do not affect the English text: a) In Figure 1, item 7 of the key, 15 min. has been added. b) In subclause 4.4.1.6, the angle of declination has been corrected to read “mindestens 15” (at least 15). Previous editions DIN EN 1176-10: 2008-08 sicherhei

8、tsgesetz (German Equipment and Product Safety Law). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1176-10May 2008ICS 97.200.40English VersionPlayground equipment and surfacing - Part 10: Additionalspecific safety requirements and test methods for fully enclosedplay equipmentEquipements daires de

9、 jeux et revtements de surfacedaires de jeux - Partie 10: Exigences de scurit etmthodes dessai complmentaires spcifiques auxquipements de jeu totalement fermsSpielplatzgerte und Spielplatzbden - Teil 10: Zustzlichebesondere sicherheitstechnische Anforderungen undPrfverfahren fr vollstndig umschlosse

10、ne SpielgerteThis European Standard was approved by CEN on 25 April 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliograp

11、hical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN

12、 member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy

13、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Bru

14、ssels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1176-10:2008: EEN 1176-10:2008 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Safety requirements 6 4.1 General6 4.2 Emergency

15、procedures and fire safety management6 4.2.1 Materials including flammability 6 4.2.2 Evacuation6 4.3 Design and manufacture.10 4.3.1 Structural integrity.10 4.3.2 Impact protection.10 4.3.3 External climbability10 4.3.4 Visibility 10 4.3.5 Determination of spaces and areas .10 4.3.6 Connections .11

16、 4.3.7 Rope features.11 4.3.8 Lighting.12 4.3.9 Signage .12 4.4 Specific equipment12 4.4.1 Drop slides .12 4.4.2 Overhead track rides (rigid)13 4.4.3 Ball pool15 4.4.4 Electrically powered equipment.16 5 Inspection and maintenance information to be provided by the manufacturer or supplier16 6 Test r

17、eports 18 7 Marking .18 DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 3 Foreword This document (EN 1176-10:2008) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shal

18、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this documen

19、t may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard consists of a number of parts as follows: EN 1176-1, Playground equipment and surfacing Part 1: General safety requirements and test methods E

20、N 1176-2, Playground equipment and surfacing Part 2: Additional specific safety requirements and test methods for swings EN 1176-3, Playground equipment and surfacing Part 3: Additional specific safety requirements and test methods for slides EN 1176-4, Playground equipment and surfacing Part 4: Add

21、itional specific safety requirements and test methods for cableways EN 1176-5, Playground equipment and surfacing Part 5: Additional specific safety requirements and test methods for carousels EN 1176-6, Playground equipment and surfacing Part 6: Additional specific safety requirements and test meth

22、ods for rocking equipment EN 1176-7, Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation EN 1176-10, Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment EN 1176-1

23、1, Playground equipment and surfacing Part 11: Additional specific safety requirements and test methods for spatial network This part of EN 1176 should not be used in isolation, but in conjunction with EN 1176-1, EN 1176-7 and EN 1177. For inflatable play equipment see EN 14960, Inflatable play equi

24、pment Safety requirements and test methods According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany

25、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 4 1 Scope This document is applicable to fully enclosed

26、play equipment intended for installation inside and outside build-ings, for children up to 14 years old, see 3.1. The purpose of this document is to provide additional safety requirements covering particulars of these struc-tures, such as exits and escape routes, visibility, external “climbability“,

27、 containment walls/netting in relation to safety area, ignition resistance, specific equipments/components, impact-attenuating surfaces, signage, spe-cific inspection and maintenance. 2 Normative references The following referenced documents are indispensable for the application of this document. Fo

28、r dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1021-1, Furniture Assessment of the ignitability of upholstered furniture Part 1: Ignition source smouldering cigarette EN 1021-2, Furnitu

29、re Assessment of the ignitability of upholstered furniture Part 2: Ignition source match flame equivalent EN 1176-1:2008, Playground equipment and surfacing Part 1: General safety requirements and test meth-ods EN 1176-3:2008, Playground equipment and surfacing Part 3: Additional specific safety req

30、uirements and test methods for slides EN 1176-4: Playground equipment and surfacing Part 4: Additional specific safety requirements and test methods for cableways EN 1177:2008, Impact attenuating playground surfacing - Determination of critical fall height EN ISO 11925-2, Reaction to fire tests - Ig

31、nitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2002) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1176-1:2008 and EN 1177:2008 and the following apply. 3.1 fully enclosed pla

32、y equipment equipment and structures, including components and constructional elements with, or on which, children can play, that are within a three dimensional enclosure with specified entrances and exits 3.2 drop slide open-fronted, near vertical free-fall slide which continues into a concave curv

33、e to a near horizontal run-out section (see Figure 1) DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 5 Key 1 starting section 2 sliding section (includes curve) 3 run-out section 4 height of slide 5 lateral protection 6 concave curve 7 slide angle to vertical, 15 min. 8 radius, 100 mm min. Figure 1 Typi

34、cal drop slide, side view 3.3 overhead track ride (rigid) equipment on which children can travel by self propulsion along a rigid fixed horizontal or inclined overhead track 3.4 terminus or starting point area in which the user can reach the grip and/or “seat“ and set the equipment in motion 3.5 are

35、a of travel area in which the user can travel freely 3.6 overhead track part of the structure that supports the traveller 3.7 traveller moving part that, by influence of self propulsion by the user, he/she moves along the overhead track 3.8 linkage element part of the structure between the traveller

36、 and the “seat“ and which often also provides grip DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 6 3.9 end stops energy absorbing materials positioned to cushion the impact of the traveller at the start and end of the over-head track 3.10 ball pools enclosure designed to contain a depth of balls within

37、 which children can play 3.11 evacuation route path inside the equipment enabling adult access to bring a child to an exit; this includes access/egress points 3.12 evacuation slide slide which ends either outside the play equipment or directly in front of an exit 4 Safety requirements 4.1 General Fu

38、lly enclosed play equipment shall conform to EN 1176-1 unless otherwise specified in this part of EN 1176. 4.2 Emergency procedures and fire safety management 4.2.1 Materials including flammability Materials used in the construction of fully enclosed play equipment shall conform to EN ISO 11925-2 an

39、d/or EN 1021-1 and EN 1021-2. 4.2.2 Evacuation 4.2.2.1 Accessibility for adults Equipment should be designed to ensure that adults are able to gain access to any point to assist children within the equipment. 4.2.2.2 General requirements for entrapment of the whole body To prevent entrapment of the

40、whole body, tunnels shall conform to the requirements for tunnels given in EN 1176-1:2008, 4.2.7.4. 4.2.2.3 Evacuation routes Evacuation routes shall conform to Table 1. An evacuation route shall have a height of at least 1 300 mm and a width of at least 900 mm, except that for capacities of less th

41、an 20 children, the width may be reduced to a minimum of 720 mm. Play equipment can be placed inside the evacuation route only if it meets the following requirements. Play equipment that is placed along the vertical or horizontal surfaces of the evacuation route shall not impede exit and shall not p

42、rovide a risk of entrapment. DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 7 Moving play equipment hanging in the evacuation route, for example punching bags, shall allow easy passage through when using a manual pushing action. Play equipment in the evacuation route shall not reduce the route to a widt

43、h of less than 900 mm or a height of less than 1 300 mm. Items of play equipment placed inside the evacuation route shall have a depth of no more than 200 mm and there shall be a distance of at least 1 000 mm between any pieces of such play equipment which re-duce the dimensions of the evacuation ro

44、ute. 4.2.2.4 Evacuation slide For any slide that ends directly in front of an exit, there shall be a distance no greater than 3 000 mm between the end of the run-out section and the exit. 4.2.2.5 Distance to the exit The distance from any point in the equipment to the nearest exit shall be no greate

45、r than 18 m. There are some special cases for calculation of this distance: for a slide, the distance is half the length of the sliding surface; for a climbing tower, add vertical and horizontal distances between the geometric centres of the openings (see Figure 2). DIN EN 1176-10:2008-10 EN 1176-10

46、:2008 (E) 8 Key 1 platform H horizontal distance V vertical distance Figure 2 Measuring distances within a climbing tower 4.2.2.6 Access and egress The number of access and egress points shall conform to Table 1. Access/egress points shall be located so as to distribute evacuation through different

47、zones of the play equipment (see Table 1). DIN EN 1176-10:2008-10 EN 1176-10:2008 (E) 9 Table 1 Evacuation routes, access and egress points Dimensions in metres Capacity (number of users) Calculated ac-cording to 4.2.2.7 1 to 20 21 to 50 51 to 100 101 to 200 201 Highest plat-form 0 2 2 4 4 6 6 0 2 2

48、 4 4 6 6 0 2 2 4 4 6 6 0 2 2 4 4 6 6Minimum num-ber of access and/or egress points 2 2 2 2 2 2 3 3 2 2 3 4 3 3 4 4 See for-mula a Maximum dis-tance from any point to an eva-cuation route, or evacuation slide 10 b 5 b a For capacities in excess of 200 users, the following formula shall be applied: 15

49、0points egressand/or access ofnumber Minimum +=capacitybIf this maximum distance is sufficient to reach the exit, an evacuation route or an evacuation slide is not necessary in-side the equipment. 4.2.2.7 Capacity Capacity, C1, shall be calculated taking into account: a) the strength of the structure in accordance with EN 1176-1; b) practical use based upon the following Equation (1): 3321CCC+= (1) where C2 is the capacity calculated according to EN 1176-1; and C3i