DIN EN 1114-3-2010 Plastics and rubber machines - Extruders and extrusion lines - Part 3 Safety requirements for haul-offs German version EN 1114-3 2001+A1 2008《橡胶和塑料机械 挤压机和挤压线 第3部.pdf

《DIN EN 1114-3-2010 Plastics and rubber machines - Extruders and extrusion lines - Part 3 Safety requirements for haul-offs German version EN 1114-3 2001+A1 2008《橡胶和塑料机械 挤压机和挤压线 第3部.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1114-3-2010 Plastics and rubber machines - Extruders and extrusion lines - Part 3 Safety requirements for haul-offs German version EN 1114-3 2001+A1 2008《橡胶和塑料机械 挤压机和挤压线 第3部.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、January 2010DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 83.200!$I“1569138www.d

2、in.deDDIN EN 1114-3Plastics and rubber machines Extruders and extrusion lines Part 3: Safety requirements for haul-offs (includes Amendment A1:2008)English version of DIN EN 1114-3:2010-01Kunststoff- und Gummimaschinen Extruder und Extrusionsanlagen Teil 3: Sicherheitsanforderungen fr Abzge (enthlt

3、nderung A1:2008)Englische Fassung DIN EN 1114-3:2010-01SupersedesDIN EN 1114-3:2001-06www.beuth.deDocument comprises pages29Start of validity This standard takes effect on 1 January 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Commi

4、ttee CEN/TC 145 “Plastics and rubber machines” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-14-03 AA Extruder of Section Kunststoff- und Gummimaschinen. R

5、epresentatives of manufacturers and users of haul-offs, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 De

6、cember 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to haul-offs that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirem

7、ents of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European S

8、tandards referred to in clause 2 have been published as the corresponding DIN EN Standards with the same number. Amendments This standard differs from DIN EN 1114-3:2001-06 as follows: a) The main element of the title has been modified. b) The foreword has been modified and the main changes compared

9、 to the previous version have been listed. c) Normative references to EN 292-1:1991 and EN 292-2:1991/A1:1995 have been replaced with EN ISO 12100-1:2003 and EN ISO 12100-2:2003 in the following clauses and subclauses: 2, 5, 5.1.1, 5.1.6, 5.5, Table 2, 7.1 and 7.2. d) Subclause 5.6.2 “Determination

10、of noise emission values” has been revised. e) Subclause 7.1 “Minimum marking on the machine” has been revised. f) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been updated. g) Annex ZB (informative) “Relationship be

11、tween this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous editions DIN EN 1114-3: 2001-06 2 DIN EN 1114-3:2010-01 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1114-3:2001+A1 October 2008 ICS 83.200 Supersedes EN 1114-3:2001English Ver

12、sion Plastics and rubber machines Extruders and extrusion lines Part 3: Safety requirements for haul-offs Machines pour les matires plastiques et le caoutchouc Extrudeuses et lignes dextrusion Partie 3: Prescriptions de scurit pour les extracteurs Kunststoff- und Gummimaschinen Extruder und Extrusio

13、nsanlagen Teil 3: Sicherheitsanforderungen fr Abzge This European Standard was approved by CEN on 28 December 2000 and includes Amendment 1 approved by CEN on 15 June 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe

14、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English

15、, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cy

16、prus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

17、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1114-3:2001+A1:2008: EEN 1114-3:2001+A1:2008 (E) 2 Contents Pa

18、ge Foreword3 Introduction .4 1 Scope 4 2 Normative references 5 3 Terms and definitions .6 4 List of significant hazards 7 4.1 Mechanical Hazards 7 4.2 Hazards due to electrical energy13 4.3 Hazards due to hydraulic and pneumatic equipment 14 4.4 Hazards due to failure of safety related parts of con

19、trol systems .14 4.5 Thermal hazards 14 4.6 Hazards due to noise.14 4.7 Hazards due to instability .14 5 Safety requirements and/or protective measures14 5.1 Mechanical hazards.14 5.1.1 General14 5.1.2 Feeding zone14 5.1.3 Conveying zone .15 5.1.4 Drive and power transmission zone 15 5.1.5 Discharge

20、 zone 16 5.1.6 Start up and machine setting operations in the danger zones.16 5.1.7 Wheels for machinery movement for changes of location17 5.1.8 Falling/uncontrolled descent due to gravity.17 5.2 Hazards due to electrical energy17 5.2.1 Electrical shock or burns caused by direct or indirect contact

21、 with live parts 17 5.2.2 Hazards due to electrostatic discharge.19 5.3 Hazards due to hydraulic and pneumatic equipment 19 5.4 Hazards due to failure of safety related parts of control systems .19 5.5 Thermal hazards 20 5.6 Hazards due to noise.20 5.6.1 Noise reduction at source by design.20 5.6.2

22、Determination of noise emission values.20 5.6.3 Declaration of noise emission values .21 5.7 Hazards due to instability .21 6 Verification of the safety requirements and/or protective measures.21 7 Information for use 23 7.1 Minimum marking on the machine.23 7.2 Instruction manual.23 Annex ZA (infor

23、mative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“.25 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.26 Bibliography 27 DIN EN 1114-3:2010-01 EN 1114-3:2001+A1:2

24、008 (E) 3 Foreword This European Standard (EN 1114-3:2001+A1:2008) has been prepared by Technical Committee CEN/TC 145 “Plastics and rubber machines“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identic

25、al text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-06-15. !The main changes compared to the previous version are: modification of the main element of

26、 the title; editorial modification of Annex ZA; addition of Annex ZB; editorial changes of EN 292-1:1991 to EN ISO 12100-1:2003 and of EN 292-2:1991/A1:1995 to EN ISO 12100-2:2003 in the following clauses/sub-clauses: 2, 5, 5.1.1, 5.1.6, 5.5, 5.6.2, Table 2, 7.1, 7.2; minor changes in the Foreword a

27、nd in sub-clauses 5.6.2 and 7.1, second and third indents.“ This document supersedes EN 1114-3:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission

28、and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This is the third in a series of standards on the safety of extruders and extrusion

29、lines. Part 1 deals with extruders. Part 2 deals with die face pelletisers. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, E

30、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 1114-3:2010-01 EN 1114-3:2001+A1:2008 (E) 4 Introduction This do

31、cument is a type C standard as stated in EN 1070. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standar

32、ds, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. 1 Scope This European Standard contains the safety requirements for the design and construction o

33、f haul-offs used in extrusion lines for processing plastics and rubber for the hazards identified in clause 4. The following kinds of haul-offs are covered: caterpillar haul-offs; belt haul-offs; capstan haul-offs; belt capstan haul-offs; roller haul-offs. The machine begins at the material inlet op

34、ening and ends at the material outlet. Cutting units which are integrated with or attached to the haul-off are not covered. Take-off devices used at film or sheet lines are not covered. Chemical, toxicological and fire hazards which could occur for example in continuous vulcanisation plants due to t

35、he materials processed are not dealt with. Unwinding and winding machines are not subject to this standard. They are being dealt with in a separate standard being produced by another working group of CEN/TC 145. This document is not applicable to haul-offs which are manufactured before the date of p

36、ublication by CEN of this document. DIN EN 1114-3:2010-01 EN 1114-3:2001+A1:2008 (E) 5 2 Normative references This European standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publ

37、ications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including a

38、mendments). !deleted text“ EN 294:1992, Safety of Machinery - Safety distances to prevent danger zones being reached by the upper limbs. EN 418:1992, Safety of Machinery - Emergency stop equipment, functional aspects - Principles for design. EN 563:1994, Safety of Machinery - Temperatures of touchab

39、le surfaces - Ergonomic data to establish temperature limit values for hot surfaces. EN 574:1996, Safety of machinery - Two-hand control devices - Functional aspects - Principles for design. EN 811:1996, Safety of Machinery - Safety distances to prevent danger zones being reached by the lower limbs.

40、 EN 953:1997, Safety of Machinery - Guards - General requirements for the design and construction of fixed and movable guards. EN 954-1:1996, Safety of Machinery - Safety related parts of control systems - Part 1: General principles for design. EN 982:1996, Safety requirements for fluid power system

41、s and components hydraulics. EN 983:1996, Safety requirements for fluid power systems and components pneumatics. EN 999:1998, Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body. EN 1037:1995, Safety of machinery - Prevention of unex

42、pected start-up. EN 1070, Safety of machinery Terminology. EN 1088:1995, Safety of Machinery - Interlocking devices associated with guards - Principles for design and selection. prEN 1760-2:1996, Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design

43、and testing of pressure sensitive edges and pressure sensitive bars. EN 60204-1:1997, Safety of Machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997). EN 60529:1991, Degrees of protection provided by enclosures (IP-Code) (IEC:1989). EN ISO 3744:1995, Acoustic

44、s; Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994). EN ISO 4871:1996, Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996). DIN

45、EN 1114-3:2010-01 EN 1114-3:2001+A1:2008 (E) 6 EN ISO 9614, Acoustics - Determination of sound power levels of noise sources using sound intensity. EN ISO 11201:1995, Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at the work station and at other

46、 specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995). EN ISO 11204:1995, Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at the work station and at other specified positions - Method requi

47、ring environmental corrections (ISO 11204:1995). EN ISO 11688-1:1998, Acoustics - Recommended practice for the design of low-noise machinery and equipment; Part 1: Planning (ISO/TR 11688-1:1995). !EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic te

48、rminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003)“ 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1070 and the following te

49、rms and definitions apply: 3.1 haul-off a powered device used in extrusion lines to continuously haul off products such as cable, cable core, profiles, pipes or tape. lt operates by pulling the product by means of friction between the product and the moving gripping elements. 3.2 caterpillar haul-off a device comprising two or more sets of linked elements equipped with gripping segments or lugs; one or more are driven. Grip is achieved when the elements are closed together by pressing the product between them (see figur