DIN CEN ISO TS 16401-1-2012 Electronic fee collection - Evaluation of equipment for conromity to ISO TS 17575-2 - Part 1 Test suite structure and test purposes (ISO TS 16401-1 2012.pdf

《DIN CEN ISO TS 16401-1-2012 Electronic fee collection - Evaluation of equipment for conromity to ISO TS 17575-2 - Part 1 Test suite structure and test purposes (ISO TS 16401-1 2012.pdf》由会员分享，可在线阅读，更多相关《DIN CEN ISO TS 16401-1-2012 Electronic fee collection - Evaluation of equipment for conromity to ISO TS 17575-2 - Part 1 Test suite structure and test purposes (ISO TS 16401-1 2012.pdf（162页珍藏版）》请在麦多课文档分享上搜索。

1、Juni 2012 Normenausschuss Automobiltechnik (NAAutomobil) im DINDKE Deutsche Kommission Elektrotechnik Elektronik Informationstechnik im DIN und VDEPreisgruppe 35DIN Deutsches Institut fr Normung e. V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr

2、Normung e. V., Berlin, gestattet.ICS 03.220.20; 35.240.60Zur Erstellung einer DIN SPEC knnen verschiedene Verfahrensweisen herangezogen werden: Das vorliegende Dokument wurde nach den Verfahrensregeln einer Vornorm erstellt.!$u“1888293www.din.deDDIN CEN ISO/TS 16401-1Elektronische Gebhrenerhebung Ko

3、nformittsevaluierung von Einrichtungen nach ISO/TS 17575-2 Teil 1: Prfreihen-Struktur und Prfabsichten (ISO/TS 16401-1:2012);Englische Fassung CEN ISO/TS 16401-1:2012Electronic fee collection Evaluation of equipment for conromity to ISO/TS 17575-2 Part 1: Test suite structure and test purposes (ISO/

4、TS 16401-1:2012);English version CEN ISO/TS 16401-1:2012Perception du tlpage valuation de conformit de lquipement lISO/TS 17575-2 Partie 1: Structure de la suite dessais et objectifs dessai (ISO/TS 16401-1:2012);Version anglaise CEN ISO/TS 16401-1:2012Alleinverkauf der Spezifikationen durch Beuth Ve

5、rlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 162 SeitenDIN SPEC 70665DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 2 Nationales Vorwort Dieses Dokument (CEN ISO/TS 16401-1:2012) wurde vom Technischen Komitee CEN/TC 278 Straen-transport und Verkehrstelematik“ ausgearbeitet, dessen Sekretariat v

6、om NEN (Niederlande) gehalten wird. Das zustndige deutsche Normungsgremium ist der Gemeinschaftsarbeitsausschuss NA 052-02-71 GA Straenverkehrtelematik“ des Normenausschusses Automobiltechnik. Das Prsidium des DIN hat mit seinem Beschluss 1/2004 festgelegt, dass von dem in den Regeln der europischen

7、 Normungsarbeit von CEN/CENELEC verankerten Grundsatz, wonach Europische Normen in den drei offiziellen Sprachen Deutsch, Englisch und Franzsisch verffentlicht werden, in begrndeten Ausnahmefllen abgewichen und auf die deutsche Sprachfassung verzichtet werden kann. Dieser Teil der ISO/TS 16401 ist T

8、eil einer Reihe von Normen, die Interoperabilitt von autonomen Systemen fr die elektronische Gebhrenerhebung (EFC) untersttzt. Diese Reihe von Normen umfasst ISO/TS 17575 Teil 1 bis Teil 4, welche die EFC Inhaltsdaten, deren Gebhrenberichte und die Nutzung der Kommunikations-infrastruktur festlegt.

9、Diese Norm legt Anwendungsprotokoll-Schnittstellen und deren Zugriff fest und wird somit von EFC-System-herstellern zu Konformittsprfungen herangezogen. Eine DIN SPEC nach dem Vornorm-Verfahren ist das Ergebnis einer Normungsarbeit, das wegen bestimmter Vorbehalte zum Inhalt oder wegen des gegenber

10、einer Norm abweichenden Aufstellungsverfahrens vom DIN noch nicht als Norm herausgegeben wird. Zur vorliegenden DIN SPEC wurde kein Entwurf verffentlicht. Erfahrungen mit dieser DIN SPEC sind erbeten vorzugsweise als Datei per E-Mail an wernvda.de in Form einer Tabelle. Die Vorlage dieser Tabelle ka

11、nn im Internet unter http:/www.din.de/stellungnahme abgerufen werden; oder in Papierform an den Normenausschuss Automobiltechnik, Behrenstr. 35, 10117 Berlin DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 3 Nationaler Anhang NA (informativ) Begriffe Die Benennungen der folgenden Begriffe sind ident

12、isch mit den Benennungen in der Englischen Fassung. 3.1 Vertrag (en: contract) Ausdruck einer bereinkunft zwischen zwei oder mehreren Verhandlungspartnern zur Nutzung der Straen Infrastruktur ISO 14906:2011, Definition 3.7 ANMERKUNG Ein Vertrag legt Verpflichtungen, Erlaubnisse und Verbote fr die be

13、troffenen Objekte fest. 3.2 Front End Anwendung (en: Front End application) Teil des Front-Ends oberhalb der Applikation Protokoll Schnittstelle (API) 3.3 Dienstanbieter (en: service provider) Betreiber, der vom Nutzer Zahlungsmittel akzeptiert und dafr dem Nutzer Straennutzungsdienst anbietet ANMER

14、KUNG Aus der ISO 14906:2004. 3.20 Mauterheber (en: toll charger) legale Einrichtung zur Fahrzeug-Mauterhebung in einem Mautgebiet ISO/TS 17574:2009, Definition 3.27 DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 4 Leerseite TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN

15、 ISO/TS 16401-1 March 2012 ICS 03.220.20; 35.240.60 English Version Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO 16401-1:2012) Perception du tlpage - valuation de conformit de lquipement lISO/TS 17575-2 - P

16、artie 1: Structure de la suite dessais et objectifs dessai (ISO 16401-1:2012) Elektronische Gebhrenerhebung - Konformittsevaluierung von Einrichtungen nach ISO/TS 17575-2 - Teil 1: Prfreihen-Struktur und Prfabsichten (ISO 16401-1:2012) This Technical Specification (CEN/TS) was approved by CEN on 30

17、January 2012 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members a

18、re required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possi

19、ble conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

20、orway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 16401-1:

21、2012: E EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGContents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references 5 3 Terms and definitions 5 4 Abbreviations . 6 5 Test Suite Structure (TSS) . 7 5.1 Structure . 7 5.2 Reference to

22、 conformance test specifications . 7 5.3 Test Purposes (TP). . 8 5.3.1 TP definition conventions . 8 5.3.2 TP naming conventions . 8 5.4 Protocol Conformance Test Report (PCTR) 9 Annex A (normative) TP for Front End Communications API . 10 Annex B (normative) Annex ATP for Front End Application . 14

23、3 Annex C (informative) PCTR Proforma for Front End Communications API . 147 Annex D (informative) PCTR Proforma for Front End Application . 154 Bibliography 158 2DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) Foreword This document (CEN ISO/TS 16401-1:2012) has been pre

24、pared by Technical Committee CEN/TC 278 “Road transport and traffic telematics”, the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 204 “Intelligent transport systems”. Attention is drawn to the possibility that some of the elements of this document may be the

25、subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Be

26、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

27、 3DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) Introduction This part of ISO/TS 16401 is part of a set of standards that supports interoperability of autonomous EFC-systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context data, their charge reports

28、 and their use of communication infrastructure. Within the suite of EFC standards this conformance evaluation procedure defines the process and tests for conformity evaluation of Front End Communications API and Front End application that comply with the requirements in ISO/TS 17575-2. This part of

29、ISO/TS 16401 is intended to assess Front End Communications API and Front End application capabilities, assess Front End Communications API and Front End application behaviour, serve as a guide for Front End Communications API and Front End application conformance evaluation and type approval, achie

30、ve comparability between the results of the corresponding tests applied in different places at different times, and facilitate communications between parties. This part of ISO/TS 16401 is based on ISO/TS 17575-2, and the ISO/IEC 9646 family of standards on conformance test methodology. 4DIN CEN ISO/

31、TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) 1 Scope This part of ISO/TS 16401 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of Front End Communications API and Front End application to ISO/TS 17575-2. The objective of this part of ISO/

32、TS 16401 is to provide a basis for conformance tests for Front Ent Communications API and Front End application in Electronic Fee Collection based on autonomous on-board equipment (OBE) to enable interoperability between different equipment supplied by different manufacturers. This part of ISO/TS 16

33、401 covers the test purposes for Front End Communications API covering functionalities related to instance handling, session handling, communication service primitives (i.e. sending/receiving of ADUs) and visible state transitions. It fully covers EFC communication services claimed in ISO/TS 17575-2

34、 clause 7 and PICS proforma Clause B.2 ISO/TS 17575-2. Claims related to Front End Storage capacity are outside of the scope of this part of ISO/TS 16401. This part of ISO/TS 16401 covers the test purposes for Front End application related to session establishment on Back End request and related to

35、session re-establishment when session requested by Back End failed. There are no other claims with respect to Front End application claimed in ISO/TS 17575-2. The underlying communication technology requirements for layer 1-4 specified in Clause 8 ISO/TS 17575-2 is outside of the scope of this part

36、of ISO/TS 16401. Similarly Back End communications API is outside of the scope of this part of ISO/TS 16401. According to ISO/TS 17575-2 it is expected that these Front End Communications API will be reflected in the BE, however BE Communications API is outside of the scope of ISO/TS 17575-2. 2 Norm

37、ative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 17575-1, Electronic fee c

38、ollection Application interface definition for autonomous systems Part 2: Charging ISO/TS 17575-2, Electronic fee collection Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers 3 Terms and definitions For the purposes of this document, the

39、 terms and definitions given in ISO/TS 17575-1 and the following apply. 5DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) 3.1 contract expression of an agreement between two or more parties concerning the use of the road infrastructure ISO 14906:2011, definition 3.7 NOTE A

40、 contract specifies obligations, permissions and prohibitions for the objects involved. 3.2 Front End application part of the Front End above the API 3.3 service provider operator that accepts the users payment means and in return provides a road-use service to the user NOTE Taken from ISO 14906:200

41、4. 3.4 toll charger legal entity charging toll for vehicles in a toll domain ISO/TS 17574:2009, definition 3.27 4 Abbreviations For the purposes of this document, the following abbreviations apply throughout the document unless otherwise specified. ADU Application Data Unit API Application Programmi

42、ng Interface ASN.1 Abstract Syntax Notation One ATS Abstract Test Suite BE Back End BI Invalid Behaviour BV Valid Behaviour CCC Compliance Check Communication CN Cellular Network DUT Device Under Tests EFC Electronic Fee Collection FE Front End GNSS Global Navigation Satellite Systems HMI Human Mach

43、ine Interface ID Identifier 6DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) OBE On-Board Equipment PCTR Protocol Conformance Test Report PICS Protocol Implementation Conformance Statements TP Test Purposes TSS Test Suite Structure VAT Value Added Tax 5 Test Suite Structu

44、re (TSS) 5.1 Structure Table 1 Test Suite Structures shows the Test Suite Structure (TSS). Table 1 Test Suite Structures Group Type of DUT Behaviour Instance Handling Front End Communications API Valid Behaviour Invalid Behaviour Session Handling Front End Communications API Valid Behaviour Invalid

45、Behaviour Front End application Valid Behaviour Communication Service Primitives Front End Communications API Valid Behaviour Invalid Behaviour State Transitions Front End Communications API Valid Behaviour 5.2 Reference to conformance test specifications This part of ISO/TS 16401 takes into account

46、 already defined test purposes for conformance to the base standards by referencing them, so that: a) For test purposes that are identical to those defined in the base standards conformance test cases direct reference is reported. For readers convenience, the title or a verbal description of the ref

47、erenced test purpose is given, together with the reference. b) For test purposes that are derived from those defined in the base standards conformance test cases, a direct reference is reported, plus an indication on how the referred test purpose has to be modified for the profile conformance testin

48、g. c) For test purposes that are specific to ISO/TS 17575-2, a complete description is given. d) An indication on whether a test purpose is identical, derived, or specific is given in each test purpose. 7DIN CEN ISO/TS 16401-1 (DIN SPEC 70665):2012-06 CEN ISO/TS 16401-1:2012 (E) 5.3 Test Purposes (T

49、P) 5.3.1 TP definition conventions The TPs are defined following the rules shown in Table 2 TP Definition Rules below. All Test Purposes are defined in Annex A and Annex B, including the special notation and symbol conventions that shall be used. Table 2 TP Definition Rules TP ID according to the TP naming conventions Title Reference TP origin Initial condition Stimulus and expected behaviour TP ID The TP ID is a unique identifier. It shall be specified ac