DIN 924-2012 Slotted raised countersunk head screws with dog point《带蜗杆槽头半沉头螺钉》.pdf

《DIN 924-2012 Slotted raised countersunk head screws with dog point《带蜗杆槽头半沉头螺钉》.pdf》由会员分享，可在线阅读，更多相关《DIN 924-2012 Slotted raised countersunk head screws with dog point《带蜗杆槽头半沉头螺钉》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、June 2012 Translation by DIN-Sprachendienst.English price group 6No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 21

2、.060.10!% b) Clause 3 on symbols has been included; c) the tolerance for f has been included in Table 1; d) according to DIN EN ISO 225, symbols have been revised; e) according to DIN EN ISO 225, dimension l2has been changed to z; f) the following symbols have been changed: r1to rf, r2to r and r3to

3、rz; g) radius rehas been included, replacing dimension z; h) in Table 2, property class 4.8 has been restricted to thread sizes from M1,6; i) in Table 2, footnote a has been deleted and its content included under “Mechanical properties”. Previous editions DIN 924: 1943-01, 1953-08, 1972-08, 1986-09,

4、 2006-08 DIN 924:2012-06 4 1 Scope This standard specifies characteristics for M1,4 to M3 slotted raised countersunk head screws with dog point for product grades F and A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refe

5、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. DIN 267-6, Fasteners Technical specifications, finishes and tolerances for product grade F DIN 962, Bolts, screws, studs and nuts Designation, types and f

6、inishes DIN 4000-160, Tabular layout of product properties Part 160: Fasteners with external thread DIN EN 10087, Free-cutting steels Technical delivery conditions for semi-finished products, hot-rolled bars and rods DIN EN 10277-3, Bright steel products Technical delivery conditions Part 3: Free-cu

7、tting steels DIN EN 26157-1, Fasteners Surface discontinuities Bolts, screws and studs subject to general requirements DIN EN 28839, Mechanical properties of fasteners Nonferrous metal bolts, screws, studs and nuts DIN EN ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of d

8、imensions DIN EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread DIN EN ISO 3269, Fasteners Acceptance inspection DIN EN ISO 3506-1, Mechanical properties of corrosi

9、on-resistant stainless steel fasteners Part 1: Bolts, screws and studs DIN EN ISO 4042, Fasteners Electroplated coatings DIN EN ISO 4753, Fasteners Ends of parts with external ISO metric thread DIN EN ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and

10、C DIN EN ISO 16048, Passivation of corrosion-resistant stainless-steel fasteners DIN ISO 965-1, ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data DIN ISO 8992, Fasteners General requirements for bolts, screws, studs and nuts DIN 924:2012-06 5 3 Symbols The followi

11、ng symbols apply for countersunk head screws with dog point: l1Nominal length (excluding dog point) rzRadius between dog point and thread Other relevant symbols and their descriptions are specified in DIN EN ISO 225. 4 Dimensions See Figure 1 and Table 1. Key 1 End rounded (RN) as in DIN EN ISO 4753

12、 aEdge rounded or flat (optional). bre 1,4 d. cFor M3. dFor M3. Figure 1 Slotted raised countersunk head screw with dog point DIN 924:2012-06 6 Table 1 Dimensions Dimensions in milllimetres Thread size (d) M1,4 M1,6 M2 M2,5 M3 Pa0,3 0,35 0,4 0,45 0,5 a max. 0,6 0,7 0,8 0,9 1,0 dkmax. (nominal size)

13、2,60 3,00 3,80 4,70 5,60 min. 2,35 2,75 3,50 4,40 5,30 dpmax. (nominal size) 0,800 0,800 1,200 1,500 2,000 min. 0,775 0,775 1,175 1,475 1,975 f js15 0,2 0,35 0,40 0,50 0,60 0,75 k max. 0,84 0,96 1,20 1,50 1,65 min. 0,59 0,71 0,95 1,25 1,40 n Nominal size 0,3 0,4 0,5 0,6 0,8 max. 0,50 0,60 0,70 0,80

14、1,00 min. 0,36 0,46 0,56 0,66 0,86 r max. 0,14 0,16 0,20 0,25 0,30 rf 3 3 4 5 6 rz max. 0,1 0,1 0,1 0,1 0,1 t max. 0,65 0,80 1,00 1,20 1,45 min. 0,52 0,65 0,80 1,00 1,20 l1Nominal size Tolerance 1,6 js15 for l1+ z 2 2,5 (3) 4 (5) 6 z Nominal size min. max. 0,6 0,6 0,85 1 1 1,25 1,6 1,6 1,85 2 2 2,25

15、 2,5 2,5 2,75 (3) 3 3,25 The range of commercially available lengths l1and z is between the stepped continuous lines. Bracketed sizes l1and z should be avoided if possible. aP is the thread pitch. DIN 924:2012-06 7 5 Technical delivery conditions See Table 2. Table 2 Technical delivery conditions Ma

16、terial Steel Stainless steel Nonferrous metal General requirements DIN ISO 8992 Thread Tolerance class 6g Standard DIN ISO 965-1 Mechanical properties Property class (material) d M1,6: subject to agreement M1,6 d M3: 4.8 A1-50 A1-70 CU2 CU3 Standards DIN EN ISO 898-1 DIN EN 10087 DIN EN 10277-3 DIN

17、EN ISO 3506-1 DIN EN 28839 Limit deviations, geometrical tolerances Product grades M1,4: F M1,6: A Standards DIN 267-6, DIN EN ISO 4759-1 Surface finish Coating As processed. Passivation in accordance with DIN EN ISO 16048. Plain. DIN EN ISO 4042 applies with regard to electroplating. DIN EN ISO 404

18、2 applies with regard to electroplating. Surface discontinuities DIN EN 26157-1 applies to tolerances for surface discontinuities. Acceptance inspection DIN EN ISO 3269 applies with regard to acceptance inspection. 6 Designation EXAMPLE Designation of an M2 slotted raised countersunk head screw with dog point, with a nominal length (excluding dog point) l1 of 2,5 mm and a dog point length z of 1,6 mm, assigned to property class 4.8: Countersunk head screw DIN 924 M2 2,5 1,6 4.8 Designation details for special design features are given in DIN 962.