DIN 254-2003 Geometrical product specifications (GPS) - Series of conical tapers and taper angles Values for setting taper angles and setting heights《产品几何量技术规范(GPS) 圆锥体和锥体角度系列 锥体角度.pdf

《DIN 254-2003 Geometrical product specifications (GPS) - Series of conical tapers and taper angles Values for setting taper angles and setting heights《产品几何量技术规范(GPS) 圆锥体和锥体角度系列 锥体角度.pdf》由会员分享，可在线阅读，更多相关《DIN 254-2003 Geometrical product specifications (GPS) - Series of conical tapers and taper angles Values for setting taper angles and setting heights《产品几何量技术规范(GPS) 圆锥体和锥体角度系列 锥体角度.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、Ref. No. DIN 254 : 2003-04English price group 08 Sales No. 010801.04DEUTSCHE NORM April 2003254Continued on pages 2 to 9. No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exc

2、lusive right of sale for German Standards (DIN-Normen).Geometrical product specifications (GPS)Series of conical tapers and taper anglesTranslation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.ICS 17.040.20Geometrische Produktspez

3、ifikation (GPS) Reihen von Kegelnund Kegelwinkeln Werte fr Einstellwinkel und EinstellhhenIn keeping with current practice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.ForewordThis standard has been prepared

4、 by Technical Committee Eindimensionale Lngenprftechnik of theNormenausschuss Technische Grundlagen (Fundamentals in Technology Standards Committee), takinginto account the specifications of DIN EN ISO 1119.AmendmentsThis standard differs from the October 2000 edition in that it has been editorially

5、 revised and now coversonly those specifications not dealt with in DIN EN ISO 1119.Previous editionsDIN 254: 1922-01, 1939-12, 1957-10, 1962-07, 1974-06, 2000-10.IntroductionThe term rate of taper has been introduced to denote the geometric expression for the difference in thediameters of two cone s

6、ections over the distance between these sections, D d/L, and to distinguish it fromthe term cone denoting a geometric body. Previously, the term cone was used in both cases.1 ScopeThis standard gives a series of cones or conical tapers intended for general use in mechanical engineering.It also speci

7、fies values for the half cone angle and setting height of the cones covered in DIN EN ISO 1119.Cones for particular applications are given in Annex A.This standard, together withDIN EN ISO 1119, April 2003edition, supersedes October2000 edition.Page 2DIN 254 : 2003-042 Normative referencesThis stand

8、ard incorporates, by dated or undated reference, provisions from other publications. These norma-tive references are cited at the appropriate places in the text, and the titles of the publications are listed below.For dated references, subsequent amendments to or revisions of any of these publicatio

9、ns apply to thisstandard only when incorporated in it by amendment or revision. For undated references, the latest edition ofthe publication referred to applies.DIN 158-1 Metric taper external and mating parallel internal screw threads Dimensions, tolerancesand inspectionDIN 204 Hand reamers for mor

10、se tapersDIN 228-1 Morse tapers and metric tapers Taper shanksDIN 228-2 Morse tapers and metric tapers Taper socketsDIN 229-1 Morse taper plug gaugesDIN 229-2 Morse taper ring gaugesDIN 230-1 Morse taper plug gauges for taper sockets with drift slotDIN 230-2 Morse taper ring gauges for taper shanks

11、with drift tangDIN 238-2 Drill chuck mounting arrangements Drill chuck tapersDIN 1895 Machine reamers for morse tapersDIN 2079 7/24 tapers for spindle noses for machine toolsDIN 2080-1 7/24 taper shanks for tools and clamping devices Type ADIN 2080-2 7/24 taper shanks for tools and clamping devices

12、Type BDIN 2221 Taper plug gauges for taper sleeves for drill chucksDIN 2353 Compression fittings and couplingsDIN 2999-1 Pipe threads for tubes and fittings Parallel internal threads and taper external threads Thread dimensionsDIN 3861 Compression rings (ferrules) for use with compression couplings

13、Design and type W com-pression ends (ports)DIN 3867 Compression couplings Pressure bushes for butt jointsDIN 3901 Compression couplings Male stud compression couplingsDIN 3903 Compression couplings Taper stud elbowsDIN 3904 Compression couplings Male stud elbowsDIN 3906 Compression couplings Taper s

14、tud tees (stud branch)DIN 3907 Compression couplings Male stud tees (stud branch)DIN 3913 Compression couplings Taper stud tees (stud run)DIN 3914 Compression couplings Male stud tees (stud run)DIN 6341-1 Holding fixtures for draw-in colletsDIN 6341-2 Threads for draw-in collets DimensionsDIN 6355 C

15、lamping devices Milling machine arbors with taperDIN 6360 Milling machine arbors with 7/24 tapers for milling cutters with longitudinal and transversedriveDIN 6364 Reduction sleeves with 7/24 external taper shank for morse taper shanks with tighteningthreadDIN 6388 Collets for tool holders with 1 :

16、10 taperDIN 64420-6 Cones with half angle 9 15q GaugesDIN 69063-1 Tool receivers for types A and C hollow taper shanks as in DIN 69893 Connecting dimen-sionsDIN 69871-1 Tool shanks with 7/24 taper for automatic tool exchange Types A, AD, and BDIN 69893-1 Hollow taper shanks with flat contact Types A

17、 and C DimensionsDIN 69893-2 Hollow taper shanks with flat contact Types B and D DimensionsDIN 72311-4 Lead storage batteries Terminals, vent plugs and filler openingsDIN EN 629-1 Type 25E taper thread for connection of valves to transportable gas cylinders SpecificationDIN EN 794-3 Lung ventilators

18、 Part 3: Particular requirements for emergency and transport ventilatorsDIN EN 1707 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medicalequipment Lock fittingsDIN EN 20594-1 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medicaleq

19、uipment General requirements (ISO 594-1 : 1993)DIN EN 60095-2 Lead-acid starter batteries Part 2: Dimensions of batteries and dimensions and marking ofterminals (IEC 95-2 : 1984, modified)Page 3DIN 254 : 2003-04DIN EN ISO 595-2 Reusable all-glass or metal-and-glass syringes for medical use Design, p

20、erformancerequirements and tests (ISO 595-2 : 1987)DIN EN ISO 1119 Geometrical product specifications (GPS) Series of conical tapers and taper angles(ISO 1119 : 1998)DIN EN ISO 8434-1 Metallic tube connections for fluid power and general use Part 1: 24 compressionfittings (ISO 8434-1 : 1994)DIN EN I

21、SO 10651-4 Lung ventilators Part 4: Particular requirements for operator-powered resuscitators(ISO/DIS 10651-4 : 1998)*)DIN ISO 8489-2 Textile machinery and accessories Cones for cross winding Part 2: Dimensions,tolerances and designation of cones with half angle 3 30q (ISO 8489-2 : 1995)DIN ISO 848

22、9-3 Textile machinery and accessories Cones for cross winding Part 3: Dimensions,tolerances and designation of cones with half angle 4 20q (ISO 8489-3 : 1995)DIN ISO 8489-4 Textile machinery and accessories Cones for cross winding Part 4: Dimensions,tolerances and designation of cones with half angl

23、e 4 20q for winding for dyeing pur-poses (ISO 8489-4 : 1995)DIN ISO 8489-5 Textile machinery and accessories Cones for cross winding Part 5: Dimensions,tolerances and designation of cones with half angle 5 57q (ISO 8489-5 : 1995)ISO 239 : 1999 Drill chuck tapersISO 296 : 1991 Machine tools Self-hold

24、ing tapers for tool shanksISO 297 : 1988 7/24 tapers for tools shanks for manual changingISO 368 : 1991 Spinning preparatory, spinning and doubling (twisting) machinery Tubes for ring-spinning, doubling and twisting spindles, taper 1 : 38 and 1 : 64ISO 575 : 1978 Textile machinery and accessories Tr

25、ansfer cones Half angle of the cone 4 20qISO 594-2 : 1998 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medicalequipment Part 2: Lock fittingsISO 595-1 : 1986 Reusable all-glass or metal-and-glass syringes for medical use Part 1: DimensionsISO 839-1 : 1976 Milling

26、machine arbors with 7/24 tapers Part 1: DimensionsISO 839-2 : 1977 Milling machine arbors with 7/24 tapers Part 2: AccessoriesISO 1482 : 1983 Slotted countersunk (flat) head tapping screws (common head style)ISO 1483 : 1983 Slotted raised countersunk (oval) head tapping screws (common head style)ISO

27、 5356-1 : 1996 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sock-etsISO 8382 : 1988 Resuscitators intended for use with humans3 Concepts and symbols3.1 Concepts3.1.1 ConeConical workpiece of circular cross section.NOTE: For the purposes of this standard, the term cone r

28、efers to right circular cones, truncated or not.3.1.2 Half cone angleHalf angle of a cone which serves to adjust or align workpieces, tools or measuring devices for machining orinspection purposes (designated by a/2) (cf. figure 1).3.1.3 Setting heightLength of opposite side to half cone angle (desi

29、gnated by h), as given by h = 100 sin a/2 when placing a sinebar 100 mm in length as shown in figure 2.*) Currently at draft stage.Page 4DIN 254 : 2003-04Key:1 Sine bar2 Gauge blocksFigure 1: Cone dimensions (notation) Figure 2: Definition of a/2 based on sinebar length and setting height3.2 Quantit

30、ies and symbolsTable 1: Quantities and symbolsSymbol QuantityC Rate of taperD Cone diameter at larger endd Cone diameter at smaller endh Setting heightL Cone length (between D and d)a Cone angleaHalf cone angle24 ValuesCones of series 1 and 2 as specified in table 2 shall be used in general applicat

31、ions, preference being given toseries 1.Cones for particular applications are given in table A.1.Page 5DIN 254 : 2003-04Table 2: Cones for general applicationsBasic value for cones ofseries 1 series 2Cone angle,.2)Rate of taper,CHalf cone angle,2.3)Setting height,h,in mmG7B 165 165 1 : 0,065 826 2 8

32、2 30 99,144G7B 150 150 1 : 0,133 974 6 75 96,593G7B 135 135 1 : 0,207 106 8 67 30 92,388*) 1201) 60 86,603G7B 105 105 1 : 0,383 663 5 52 30 79,335*) 90 45 70,711*) 75 37 30 60,876*) 60 30 50,000*) 45 22 30 38,268*) 301)15 25,882*) 1 : 3 9 27 44 16,440*) 1 : 4 7 7 30 12,403*) 1 : 5 5 42 38 9,950*) 1

33、: 6 4 45 49 8,305*) 1 : 7 4 5 8 7,125*) 1 : 81)3 34 35 6,2385 44 10,550 0G7B 1 : 9,985,736 263 881 : 9,98 2 52 5 5,004*) 1 : 10 2 51 45 4,994*) 1 : 12 2 23 9 4,163*) 1 : 15 1 54 33 3,331*) 1 : 20 1 25 56 2,499*) 1 : 30 57 17 1,666*) 1 : 50 34 23 1,000*) 1 : 100 17 11 0,500*) 1 : 200 8 36 0,250*) 1 :

34、 5001)3 26 0,100*) Cf. DIN EN ISO 1119.G7B Not specified in DIN EN ISO 1119.1) Value specified in DIN EN ISO 1119.2) Values in degrees, minutes and seconds are given to the nearest 1/10 000thsecond; decimal values are givento eight decimal places.3) Values in degrees, minutes and seconds are given t

35、o the nearest second.Page 6DIN 254 : 2003-04Annex A Cones for particular applicationsTable A.1:Cones for particular applications (examples)G43G6FG6EG65G43G6FG6EG65G61G6EG67G6CG65G2CG2EG32G29G52G61G74G65G6FG66G74G61G70G65G72G2CCG48G61G6CG66G63G6FG6EG65G61G6EG67G6CG65G2C2G2EG33G29G53G65G74G74G69G6EG67

36、G68G65G69G67G68G74G2Ch,G69G6EG6DG6DG52G65G6CG65G76G61G6EG74G73G74G61G6EG64G61G72G64G28G73G29G41G70G70G6CG69G63G61G74G69G6FG6EG7BG38G30GB0G38G30GB0G31G3AG30G2CG35G39G35G2EG38G37G36G2EG38G34G30GB0G36G34G2CG32G37G39G49G53G4FG31G34G38G32G61G6EG64G49G53G4FG31G34G38G33G43G6FG75G6EG74G65G72G73G75G6EG6BG68G

37、65G61G64G74G61G70G70G69G6EG67G73G63G72G65G77G73G2CG72G61G69G73G65G64G63G6FG75G6EG74G65G72G73G75G6EG6BG68G65G61G64G74G61G70G70G69G6EG67G73G63G72G65G77G73G7BG34G30GB0G34G30GB0G31G3AG31G2CG33G37G33G2EG37G33G38G2EG37G32G30GB0G33G34G2CG32G30G32G44G49G4EG36G33G34G31G2DG31G61G6EG64G44G49G4EG36G33G34G31G2DG

38、32G44G72G61G77G2DG69G6EG63G6FG6CG6CG65G74G73G7BG32G34GB0G32G34GB0G31G3AG32G2CG33G35G32G2EG33G31G35G2EG31G31G32GB0G32G30G2CG37G39G31G44G49G4EG32G33G35G33G2CG44G49G4EG33G38G36G31G2CG44G49G4EG33G38G36G37G2CG44G49G4EG33G39G30G31G2CG44G49G4EG33G39G30G33G2CG44G49G4EG33G39G30G34G2CG44G49G4EG33G39G30G36G2CG

39、44G49G4EG33G39G30G37G2CG44G49G4EG33G39G31G33G2CG44G49G4EG33G39G31G34G61G6EG64G44G49G4EG45G4EG49G53G4FG38G34G33G34G2DG31G43G6FG6DG70G72G65G73G73G69G6FG6EG66G69G74G74G69G6EG67G73G61G6EG64G63G6FG75G70G6CG69G6EG67G73G7BG31G38GB0G33G30G31G38GB0G33G30G31G3AG33G2CG30G37G30G2EG31G31G35G2EG31G39GB0G31G35G31G

40、36G2CG30G37G34G44G49G4EG36G34G34G32G30G2DG36G43G6FG6EG65G73G66G6FG72G63G72G6FG73G73G77G69G6EG64G69G6EG67G2AG29G37G3AG32G34G28G33G2CG35G3AG31G32G29G31G29G31G29G38GB0G31G37G35G30G31G34G2CG34G33G31G44G49G4EG32G30G37G39G2CG44G49G4EG32G30G38G30G2DG31G2CG44G49G4EG32G30G38G30G2DG32G2CG44G49G4EG36G33G35G35G

41、2CG44G49G4EG36G33G36G30G2CG44G49G4EG36G33G36G34G2CG44G49G4EG36G39G38G37G31G2DG31G2CG49G53G4FG32G39G37G2CG49G53G4FG38G33G39G2DG31G61G6EG64G49G53G4FG38G33G39G2DG32G4DG61G63G68G69G6EG65G74G6FG6FG6CG73G70G69G6EG64G6CG65G73G2CG74G6FG6FG6CG66G69G74G73G2AG29G31G31GB0G35G34G97G31G29G35GB0G35G37G31G30G2CG33G

42、36G36G44G49G4EG49G53G4FG38G34G38G39G2DG35G43G6FG6EG65G73G61G6EG64G74G75G62G65G73G66G6FG72G75G73G65G69G6EG74G65G78G74G69G6CG65G69G6EG64G75G73G74G72G79G2AG29G38GB0G34G30G97G31G29G34GB0G32G30G37G2CG35G35G36G2AG29G37GB0G97G31G29G33GB0G33G30G36G2CG31G30G35G2AG29G31G3AG33G38G31G29G97G97G97G2AG29G31G3AG36G

43、34G31G29G97G97G97G44G49G4EG49G53G4FG38G34G38G39G2DG32G2CG44G49G4EG49G53G4FG38G34G38G39G2DG33G2CG44G49G4EG49G53G4FG38G34G38G39G2DG34G2CG49G53G4FG33G36G38G61G6EG64G49G53G4FG35G37G35G43G6FG6EG65G73G61G6EG64G74G75G62G65G73G66G6FG72G75G73G65G69G6EG74G65G78G74G69G6CG65G69G6EG64G75G73G74G72G79G53G65G65G74G

44、61G62G6CG65G32G66G6FG72G2AG29G2CG4FG2CG31G29G2CG32G29G61G6EG64G33G29G2EG28G63G6FG6EG74G69G6EG75G65G64G29Page 7DIN 254 : 2003-04Table A.1(continued)G43G6FG6EG65G43G6FG6EG65G61G6EG67G6CG65G2CG2EG32G29G52G61G74G65G6FG66G74G61G70G65G72G2CCG48G61G6CG66G63G6FG6EG65G61G6EG67G6CG65G2C2G2EG33G29G53G65G74G74G

45、69G6EG67G68G65G69G67G68G74G2Ch,G69G6EG6DG6DG52G65G6CG65G76G61G6EG74G73G74G61G6EG64G61G72G64G28G73G29G41G70G70G6CG69G63G61G74G69G6FG6EG36GB0G35G32G32G2CG31G33G38G2EG36G7BG33G3AG32G35G36G2CG38G36G37G2EG32G36G30G2EG37G31GB0G31G3AG38G2CG33G33G33G2EG33G33G33G2EG33G33GB0G32G36G31G35G2CG39G38G39G44G49G4EG4

46、5G4EG36G32G39G2DG31G54G61G70G65G72G74G68G72G65G61G64G73G66G6FG72G67G61G73G63G79G6CG69G6EG64G65G72G73G36GB0G32G31G33G34G2CG37G37G36G2EG38G7BG31G3AG39G36G2CG33G35G39G2EG36G36G30G2EG32G33GB0G31G3AG39G33GB0G31G30G34G37G35G2CG35G34G37G44G49G4EG37G32G33G31G31G2DG34G2CG44G49G4EG45G4EG36G30G30G39G35G2DG32G5

47、4G65G72G6DG69G6EG61G6CG73G6FG66G73G74G61G72G74G65G72G62G61G74G74G65G72G69G65G73G35GB0G34G34G31G30G2CG35G35G30G2EG30G7BG31G3AG39G2CG39G38G35G2CG37G33G36G2EG32G36G33G2EG38G38GB0G31G3AG39G2CG39G38G32GB0G35G32G35G35G2CG30G30G34G35GB0G34G33G32G39G2CG33G31G37G2EG36G7BG31G3AG31G30G35G2CG37G32G34G2EG38G31G3

48、0G2EG34G35GB0G31G3AG31G30G32GB0G35G31G34G35G34G2CG39G39G34G44G49G4EG36G33G38G38G2CG44G49G4EG36G39G30G36G33G2DG31G2CG44G49G4EG36G39G38G39G33G2DG31G61G6EG64G44G49G4EG36G39G38G39G33G2DG32G48G6FG6CG6CG6FG77G74G61G70G65G72G73G68G61G6EG6BG73G77G69G74G68G66G6CG61G74G63G6FG6EG74G61G63G74G66G6FG72G6DG61G63G6

49、8G69G6EG65G74G6FG6FG6CG73G2AG29G31G3AG31G32G2CG32G36G32G32GB0G32G30G36G34G2CG30G37G34G4AG61G63G6FG62G73G74G61G70G65G72G4EG6FG2EG32G2AG29G31G3AG31G32G2CG39G37G32G32GB0G31G32G32G36G33G2CG38G35G32G4AG61G63G6FG62G73G74G61G70G65G72G4EG6FG2EG31G2AG29G31G3AG31G35G2CG37G34G38G31G29G97G31GB0G34G39G37G33G2CG31G37G33G44G49G4EG