DIN 1025-2-1995 Hot rolled I-beams - Part 2 Wide flange I-beams IPB-serie dimensions masses sectional properties《热轧工字钢 第2部分 宽工字钢 IPB系列 尺寸 质量 断面性能》.pdf
《DIN 1025-2-1995 Hot rolled I-beams - Part 2 Wide flange I-beams IPB-serie dimensions masses sectional properties《热轧工字钢 第2部分 宽工字钢 IPB系列 尺寸 质量 断面性能》.pdf》由会员分享,可在线阅读,更多相关《DIN 1025-2-1995 Hot rolled I-beams - Part 2 Wide flange I-beams IPB-serie dimensions masses sectional properties《热轧工字钢 第2部分 宽工字钢 IPB系列 尺寸 质量 断面性能》.pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、DEUTSCHE NORM November 199 I I Hot rolled I and H sections (IPB series) Dimensions, mass and static parameters I 1025-2 ICs 77.140.70 Descriptors: Steel, sections, dimensions. Warmgewalzte I-Trger; I-Trger, IPB-Reihe; Mae, Masse, statische Werte Supersedes March 1993 edition. In keeping with current
2、 practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker. Dimensions in mm Foreword This standard has been prepared by the Normenausschu Eisen und Stahl (Steel and Iron Standards Committee). It should be note
3、d that at the European level ECISSTTC 11 is currently reviewing standardized sizes for sections and bearing piles with parallel flanges. Upon publication of the relevant European Standard, DIN 1025-2 to DIN 1025-5 will be withdrawn. Amendments In comparison with the October 1963 edition, H sections
4、with tapered flanges are no longer included. Previous editions DIN 161 2: 1924-09, 1932-01, 1943-03; 1963-1 O. 1994-03. DIN 1025-2: 1926-04, 1928-1 O, 1929-1 2, 1932-03, 1939-09, 1940-07, 1959-07 1 Scope and field of application This standard specifies dimensions and static parameters for hot rolled
5、 I and H sections (H sections, for short), with paral- lel flanges, preferably made from DIN EN 10 025 steel. This standard does not cover: a) hot rolled I sections (I series, with a smaller ratio of flange width to web height; cf. DIN 1025-1); b) hot rolled I and H sections (IPBI series, with thinn
6、er webs and flanges; cf. DIN 1025-3); c) hot rolled I and H sections (IPBv series, with thicker webs and flanges; cf. DIN 1025-4); d) hot rolled I and H sections (IPE series, with narrower flanges; ci. DIN 1025-5). 2 Normative references This standard incorporates, by dated or undated reference, pro
7、visions from other publications. These normative refer- ences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, sub- sequent amendments to or revisions of any of these publica- tions apply to this standard only when incorporated in it by
8、 amendment or revision. For undated references, the latest edition of the publication referred to applies. DIN 1025-1 Steel sections; hot rolled I beams; dimensions, mass, limit deviations and static values Hot rolled I and H sections (IPBL series); dimensions, mass and static parameters Hot rolled
9、I and H sections (IPBv series); dimensions, mass and static parameters Hot rolled I and H sections (IPE series); dimensions, mass and static parameters Hot rolled unalloyed structural steel products; technical delivery conditions (includes Amendment AI : 1993) Structural steel I and H sections; tole
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- DIN102521995HOTROLLEDIBEAMSPART2WIDEFLANGEIBEAMSIPBSERIEDIMENSIONSMASSESSECTIONALPROPERTIES 热轧 工字钢 部分

链接地址:http://www.mydoc123.com/p-652343.html