CLC TS 50537-3-2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 3 Water pump for traction converters《轨道交通 牵引变压器和冷却系统安装部件 第3部分 牵引变流器用水.pdf

《CLC TS 50537-3-2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 3 Water pump for traction converters《轨道交通 牵引变压器和冷却系统安装部件 第3部分 牵引变流器用水.pdf》由会员分享，可在线阅读，更多相关《CLC TS 50537-3-2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 3 Water pump for traction converters《轨道交通 牵引变压器和冷却系统安装部件 第3部分 牵引变流器用水.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationRailway applications Mountedparts of the traction transformerand cooling systemPart 3: Water pump for traction convertersDD CLC/TS 50537-3:2010National forewordThis Draft for Dev

2、elopment is the UK implementation of CLC/TS 50537-3:2010.The UK participation in its preparation was entrusted by Technical CommitteeGEL/9, Railway Electrotechnical Applications, to Subcommittee GEL/9/2,Railway Electrotechnical Applications - Rolling stock.A list of organizations represented on this

3、 committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 69508 7ICS 23.080; 29.180; 45.060.10Compliance with a British Standard cannot confer

4、 immunity fromlegal obligations.This Draft for Development was published under the authority of theStandards Policy and Strategy Committee on 30 April 2010.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDDD CLC/TS 50537-3:2010TECHNICAL SPECIFICATION CLC/TS 50537-3 SPCIF

5、ICATION TECHNIQUE TECHNISCHE SPEZIFIKATION February 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights

6、 of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TS 50537-3:2010 E ICS 29.180; 45.060.10 English version Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters Applications fer

7、roviaires - Accessoires des transformateurs de traction et systmes de refroidissement - Partie 3: Pompe eau pour convertisseurs de puissance Bahnanwendungen - Anbauteile des Haupttransformators und Khlsystems - Teil 3: Wasserpumpe fr Traktionsumrichter This Technical Specification was approved by CE

8、NELEC on 2010-01-22. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national elec

9、trotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede

10、n, Switzerland and the United Kingdom. DD CLC/TS 50537-3:2010CLC/TS 50537-3:2010 - 2 - Foreword This Technical Specification was prepared by Working Group 25 of SC 9XB, Electromechanical material on board rolling stock, of Technical Committee CENELEC TC 9X, Electrical and electronic applications for

11、 railways. It was circulated for voting in accordance with the Internal Regulations, Part 2, Subclause 11.3.3.3 and was accepted as a CENELEC Technical Specification on 2010-01-22. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. C

12、EN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following date is proposed: latest date by which the existence of the CLC/TS has to be announced at national level (doa) 2010-07-22 The CLC/TS 50537 series “Railway applications Mounted parts of the tract

13、ion transformer and cooling system” consists of four different parts: Part 1: HV bushing for traction transformers; Part 2: Pump for insulating liquid for traction transformers and reactors; Part 3: Water pump for traction converters; Part 4: Gas and liquid actuated (Buchholz) relay for liquid immer

14、sed transformers and reactors with conservator for rail vehicles. The CLC/TS 50537 series shall be read in conjunction with CLC/TS 50534 1)“Railway applications - Generic system architectures for onboard electric auxiliary power systems”. This standardization project was derived from the EU-funded R

15、esearch project MODTRAIN (MODPOWER). It is part of a series of standards, referring to each other. The hierarchy of the standards is intended to be as follows: 1)Under development. DD CLC/TS 50537-3:2010- 3 - CLC/TS 50537-3:2010 Overview on the technical frameworkCLC/TS 50534 defines the basis for o

16、ther depending standardsCLC/TS 50534Railway applications - Generic system architectures for onboard electric auxiliary powers systemsCLC/TS 50535Railway applications - Onboard auxiliary power converter systemLevel 1: ArchitecturesEN 50533Three-phase train line voltage characteristicsEN 50546Shore (e

17、xternal) supply systems for rail vehiclesEN 50547Batteries for rail vehiclesCLC/TS 50537-1Part 1: HV bushing for traction transformersCLC/TS 50537-2Part 2: Pump for insulating liquid for traction transformers and reactorsCLC/TS 50537-3Part 3: Water pump for traction convertersCLC/TS 50537-4Part 4: G

18、as and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehiclesLevel 2: Systems, InterfacesLevel 3: ComponentsMounted parts of the traction transformer and cooling systemDD CLC/TS 50537-3:2010CLC/TS 50537-3:2010 - 4 - Contents 1 Scope . 6 2 No

19、rmative references. 6 3 Terms and definitions 7 4 Operating conditions . 8 4.1 General 8 4.2 Environmental conditions . 8 4.3 Cooling liquid 9 4.4 Storage and transport conditions . 9 5 Electrical requirements .10 5.1 Power supply 10 5.2 Electrical connection with three-phase train line 10 5.3 Conne

20、ctor (electrical requirements) .12 5.4 Temporary loss of voltage supply 12 5.5 Insulation class and temperature rise 12 5.6 Starting current.13 5.7 Electrical discharge machining (EDM) .13 6 Mechanical requirements 13 6.1 General 13 6.2 Vibration measurement 13 6.3 Preferred dimensions .13 6.4 Conne

21、ctor (mechanical requirements) .17 7 Hydraulic requirements .17 7.1 Hydraulic performance .17 7.2 Hydraulic interchangeability .18 7.3 Preferred values .19 8 Fire protection 23 9 Reliability and lifetime .23 10 Material 24 11 Noise 24 12 Markings 24 13 Documentation .25 14 Testing .25 14.1 General 2

22、5 14.2 List of tests .26 14.3 Description of tests 26 Bibliography 29 DD CLC/TS 50537-3:2010- 5 - CLC/TS 50537-3:2010 Figures Figure 1 Typical connection to three-phase train line 11 Figure 2 Connectors with contact arrangement View onto mating side 12 Figure 3 Main dimensions of centrifugal water p

23、umps . 14 Figure 4 Main dimensions of peripheral water pumps . 16 Figure 5 Hole pattern of the preferred connector socket 17 Figure 6 Hydraulic interchangeability across the allowable operating range . 18 Figure 7 Hydraulic interchangeability across an actual flow rate . 19 Figure 8 Pump characteris

24、tic (Q-H-diagram) at a frequency of 50 Hz . 20 Figure 9 Pump characteristic (Q-H-diagram) at a frequency of 60 Hz . 20 Figure 10 Pump characteristic (Q-P-diagram) at a frequency of 50 Hz . 21 Figure 11 Pump characteristic (Q-P-diagram) at a frequency of 60 Hz . 21 Figure 12 Pump characteristic (Q-H-

25、diagram) at a frequency of 50 Hz and 60 Hz . 22 Figure 13 Pump characteristic (Q-P-diagram) at a frequency of 50 Hz and 60 Hz 23 Tables Table 1 Main dimensions of centrifugal water pumps Hydraulic system and fastening 14 Table 2 Main dimensions of centrifugal water pumps Motor including connector 15

26、 Table 3 Main dimensions of peripheral water pumps, motor data . 16 Table 4 Material of pump casing Minimum temperature . 24 Table 5 Maximum A-weighted sound power level, LWA in dB, rated load condition . 24 Table 6 List of tests 26 DD CLC/TS 50537-3:2010CLC/TS 50537-3:2010 - 6 - 1 Scope This Techni

27、cal Specification covers requirements for centrifugal and peripheral electric pumps which generate the circulation of cooling liquid in converters of rail vehicles and their associated cooling system. The pumps covered in this Technical Specification are rotodynamic pumps driven by canned motors or

28、magnetically coupled motors. CLC/TS 50537-3 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for pumps (for example EN 50216-7, EN 733 and EN ISO 9906). It determines requirements and tests enabl

29、ing the interchangeability especially regarding electrical, mechanical and hydraulic interfaces. Furthermore, service conditions are described. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cit

30、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. TS 45545 (series):2009 2)Railway applications - Fire protection on railway vehicles CLC/TS 50467 Railway applications - Rolling stock - Electrical connectors, requirements and test m

31、ethods CLC/TS 50534 3)Railway applications - Generic system architecture for onboard electric auxiliary power systems EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system EN 1092-1:2001 4)Flanges and their joints

32、 - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges EN 1092-4:2002 Flanges and their joints - Circular

33、flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges EN 1561:1997 Founding - Grey cast irons EN 1563:1997 Founding - Spheroidal graphite cast irons EN 1706:1998 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties

34、EN 10283:1998 Corrosion resistant steel castings EN 12162 Liquid pumps - Safety requirements - Procedure for hydrostatic testing EN 50125-1:1999 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock EN 50216-7:2002 Power transformer and reactor fitt

35、ings - Part 7: Electric pumps for transformer oil 2)Part 5 is of CENELEC origin Other parts are from CEN. 3)Under development. 4)Superseded by EN 1092-1:2007. DD CLC/TS 50537-3:2010- 7 - CLC/TS 50537-3:2010 EN 50347:2001 General purpose three-phase induction motors having standard dimensions and out

36、puts - Frame numbers 56 to 315 and flange numbers 65 to 740 EN 50533 3)Three-phase train line voltage characteristics EN 60034-1:2004 Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:2004) EN 60034-7:1993 + A1:2001 Rotating electrical machines - Part 7: Classification of ty

37、pes of construction, mounting arrangements and terminal box position (IM Code) (IEC 60034-7:1992 + A1:2000) EN 60034-9:2005 + A1:2007 Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, mod. + A1:2007) EN 60085:2004 5)Electrical insulation - Thermal classification (IEC 60085:2004)

38、 EN 60349-2:2001 Railway applications - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors (IEC 60349-2:1993, mod.) EN 60529:1991 + A1:2000 Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989 + A1:1999) EN 60721-3-

39、5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations (IEC 60721-3-5:1997) EN 61373:1999 Railway applications - Rolling stock equipment - Shock and vibration tests (IEC 61373:199

40、9) EN ISO 9906:1999 + corr. Dec. 2004 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999) EN ISO 15783 Seal-less rotodynamic pumps - Class II - Specification (ISO 15783) ISO 281:2007 Rolling bearings - Dynamic load ratings and rating life SAE J 518:1993 Hydrau

41、lic Flanged Tube, Pipe, and Hose Connections, Four-Bolt split flange Type 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 centrifugal pump pump where the axis of the impeller is the same as the rotation axis of the pump motor, typically fitte

42、d with a radial impeller. A typical centrifugal pump is a pump with suction and discharge nozzle pointing in perpendicular direction. Centrifugal pumps within the scope of this Technical Specification are leakage free and driven by canned motors 3.2 peripheral pump pump with a peripheral impeller, t

43、ypically laid out with radial symmetric impellers. The axis of the impeller is the same as the rotation axis of the pump motor. The suction and discharge nozzle typically point in the same direction. Peripheral pumps within the scope of this Technical Specification are leakage free and driven by mag

44、netically coupled motors 5)Superseded by EN 60085:2008. DD CLC/TS 50537-3:2010CLC/TS 50537-3:2010 - 8 - 3.3 inline-pump pump with the suction and delivery flanges lying on the same axis 3.4 canned motor liquid-filled asynchronous squirrel-cage rotor motor with a rotor and bearings immersed and opera

45、ting in the fluid pumped by the pump. The stator winding is sealed off against the fluid in the rotor compartment by a high-grade steel tube or can 3.5 magnetically coupled pump pump where the motor and the impeller each have a separate shaft. The transmission of RPM / torque is carried out with a m

46、agnetic coupling, the outer part of which rests on the motor shaft. The inner part of the magnetic coupling rests on the same shaft as the impeller. The inner and outer part of the magnetic coupling are separated by a separating can 4 Operating conditions 4.1 General The water pump is used for the c

47、ooling of converters on rail vehicles. The operation of the water pump may be affected by the conditions that occur under normal train service conditions, e.g. corrosive gases, carbon dust and other matter from brake shoes and pads or vibration stress. Among all service conditions described in this

48、part, malfunction of the pump shall not occur. 4.2 Environmental conditions The pump shall ensure appropriate functioning under the given conditions: Temperature range: Environmental temperature: Transport and storage: -25 C . 80 C Other values may be agreed between customer and supplier. -50 C . 80

49、 C Condensation shall be avoided. See also 4.4. Altitude: up to 1 400 m (EN 50125-1:1999, class A1) Humidity: 0 % . 100 % Climate class: EN 60721-3-5:1997, 5K2 Biological classification: EN 60721-3-5:1997, 5B2 Chemical classification: EN 60721-3-5:1997, 5C3 Contamination: EN 60721-3-5:1997, 5F3 Mechanical-active matters: EN 60721-3-5:1997, 5S3 Rain: EN 60721-3-5:1997, 5K3 Solar radiation: EN 60721-3-5:1997, 5K3 Shock and vibration: The pump shall be able to withs