CSA Z245 6-2006 Coiled aluminum line pipe and accessories (Fourth Edition).pdf

《CSA Z245 6-2006 Coiled aluminum line pipe and accessories (Fourth Edition).pdf》由会员分享，可在线阅读，更多相关《CSA Z245 6-2006 Coiled aluminum line pipe and accessories (Fourth Edition).pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、Z245.6-06(reaffirmed 2011)Coiled aluminum line pipe and accessoriesLegal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representin

2、g varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis

3、 document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third p

4、artys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CS

5、A, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, B

6、USINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIB

7、ILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The info

8、rmation in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profi

9、t company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it b

10、e in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such

11、 inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redr

12、ess for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this d

13、ocument is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document. Limited copies of this document in print or paper form may be distributed only to

14、persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from

15、CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use

16、 of this document constitutes your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceZ245.6-06March 2006Title:Coiled aluminum line pipe and accessoriesPagination:23 pages (x preliminary and 13 text), each dated March 2006To register for e-mail notification about

17、 any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2018349.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visi

18、t CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.Published in March 2006 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Vi

19、sit our Online Store at www.ShopCSA.caZ245.6-06Coiled aluminum line pipe and accessoriesCSA StandardISBN 1-55436-020-XTechnical Editor:Sudi Kalra Canadian Standards Association 2006All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission

20、of the publisher.March 2006 iiiContents Canadian Standards Association Coiled aluminum line pipe and accessoriesTechnical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials vSubcommittee on Aluminum Piping ixPreface x1Scope11.1 General 11.2 Pipe diameter and wall thicknes

21、s 11.3 Terminology 12 Reference publications 13 Definitions 24 General requirements 24.1 Product ordering requirements 24.1.1 Standard requirements 24.1.2 Optional requirements 24.2 Joinability 24.3 Rounding procedure 34.4 Quality program 34.5 Compliance 35 Manufacture 36 Chemical test requirements

22、36.1 General 36.2 Chemical composition 36.3 Reporting 37 Mechanical test requirements 37.1 General 37.2 Tension tests 37.2.1 General 37.2.2 Test procedure 47.2.3 Test results 47.2.4 Retests 47.3 Flaring tests for coiled pipe 57.3.1 General 57.3.2 Test procedure 57.3.3 Retests 57.4 Reporting 58 Mill

23、hydrostatic testing 59 Dimensions and tolerances 510 Inspection, tolerances, and work quality 610.1 General 610.2 Inspection 6Z245.6-06 Canadian Standards Associationiv March 200610.3 Inspection notice 610.4 Plant access 610.5 Rejection 610.6 Defects 610.6.1 Dents 610.6.2 Dimensions 610.6.3 Blisters

24、 and blowholes 610.6.4 Gouges, grooves, and pits 610.7 Disposition of pipe containing defects 710.8 Eddy current inspection for coiled pipe 710.8.1 General 710.8.2 Equipment 710.8.3 Reference standards 710.8.4 Calibration 710.8.5 Acceptance limits 810.8.6 Alarm limits 810.8.7 Inspection sensitivity

25、checks 810.8.8 Rejection 811 Marking and coating 811.1 General 811.2 Required markings and sequence 811.3 Marking location and method of application 911.4 Coating 912 Accessories 912.1 Straight pipe 912.2 Sleeves 912.3 Mandrels 912.4 Anvils 10Tables1 Dimensions and tolerances for pipe 102 Chemical c

26、omposition limits for extrusion billets 113 Tensile requirements for pipe 114 Minimum diameters of reel hubs 125 Sensitivity indicators 12Figures1 Full-section and longitudinal body strip test specimens 13 Canadian Standards Association Coiled aluminum line pipe and accessoriesMarch 2006 vTechnical

27、Committee on Petroleum and Natural Gas Industry Pipeline Systems and MaterialsR.R. Bryant Union Gas Limited,Chatham, Ontario Chair M.F. Hallihan Skystone Engineering Inc., Calgary, Alberta Vice-Chair G.R. Johnson Terasen Gas, Surrey, British ColumbiaVice-Chair T.J. Pesta Alberta Energy and Utilities

28、 Board, Calgary, Alberta Vice-Chair A.B. Rothwell TransCanada PipeLines Limited, Calgary, Alberta Vice-Chair J. Abes Canadian Energy Pipeline Association, Calgary, Alberta H.E. Allen ATCO Pipelines, Edmonton, Alberta O. Alonso Technical Standards and Safety Authority,Toronto, Ontario J. Anderson Pla

29、ins Marketing Canada, LP,Calgary, AlbertaA. Aziz Manitoba Hydro, Winnipeg, Manitoba D. Bourne BP Canada Energy Company,Calgary, Alberta B.L. Brown Pipe Line Contractors Association of Canada, Oakville, Ontario Associate D.A. Buchanan AltaGas Utilities Inc.,Leduc, Alberta R. Caesar British Columbia M

30、inistry of Energy and Mines, Victoria, British ColumbiaF.M. Christensen F.M. Christensen Metallurgical Consulting Inc., Qualicum Beach, British Columbia D.W. Clarke Trans-Northern Pipelines Inc.,Richmond Hill, Ontario Z245.6-06 Canadian Standards Associationvi March 2006P. Colwell Duke Energy Gas Tr

31、ansmission, Dresden, Ontario AssociateR.I. Coote Coote Engineering Limited, Calgary, Alberta G.L. de Caux G. de Caux Consulting,Nanaimo, British ColumbiaM.C. Enwright Husky Energy Inc.,Calgary, Alberta J.A. Fournell Dresser Flow Control, Edmonton, AlbertaB.E. Fowlie Nu-Trac Management Consulting Ltd

32、., Calgary, Alberta R.J. Fox Enbridge Gas Distribution, Toronto, OntarioL.H. Gales Transportation Safety Board of Canada,Hull, Qubec Associate A. Gilroy-Scott Texel Engineering Inc.,Victoria, British Columbia K.G. Goerz Shell Canada Limited,Calgary, Alberta G.K. Good Enbridge Pipelines Inc.,Edmonton

33、, Alberta M. Healy Duke Energy Gas Transmission,Calgary, Alberta Associate E.F. Karpiel Sun-Canadian Pipe Line Co. Limited, Waterdown, Ontario A. Kathrens Canadian Welding Bureau, Edmonton, Alberta AssociateD.S. Kong ATCO Gas, Calgary, AlbertaD. Kopperson EnCana Corporation,Calgary, Alberta H. Kraft

34、 Alliance Pipeline Limited, Calgary, Alberta W. Kresic Enbridge Pipelines Inc., Edmonton, Alberta AssociateJ. Latendresse Ezeflow Canada Incorporated, Granby, Qubec Canadian Standards Association Coiled aluminum line pipe and accessoriesMarch 2006 viiK.T. Lau Alberta Boilers Safety Association,Edmon

35、ton, Alberta T. Lawrence IPSCO Inc.,Regina, Saskatchewan J. Mackenzie North Am Energy Solutions, Bellingham, Washington USAT.W. McQuinn New Brunswick Board of Commissioners of Public Utilities, Saint John, New BrunswickD.B. Milmine DM Professional Services Ltd.,Calgary, Alberta J.R. Mitchell Camrose

36、 Pipe Company, Calgary, Alberta AssociateB. Nesbitt National Energy Board, Calgary, Alberta P. Noiseux Gaz Mtro,Montral, Qubec R.B. Partington Alberta Agriculture, Food and Rural Development,Edmonton, AlbertaAssociateW.F. Partington RTD Quality Services Inc.,Edmonton, Alberta J. Paviglianiti Nationa

37、l Energy Board,Calgary, AlbertaAssociateG.P. Rankin PetroCanada Inc., Calgary, Alberta J. Sandison Energy Consultants International Inc.,Winnipeg, Manitoba I. Scott Canadian Association of Petroleum Producers,Calgary, Alberta Associate P. Singh Shaw Pipe Protection Ltd.,Calgary, Alberta C. Skocdopol

38、e Aluminum Pipe Systems, Eckville, Alberta T.C. Slimmon TransCanada PipeLines Limited,Calgary, Alberta Associate B. Torgunrud SaskEnergy, Regina, SaskatchewanAssociateZ245.6-06 Canadian Standards Associationviii March 2006G.A. Toth Terasen Pipelines,Calgary, Alberta B. Wilson Canspec Group Inc., Cal

39、gary, AlbertaS. Kalra CSA,Mississauga, Ontario Project Manager Canadian Standards Association Coiled aluminum line pipe and accessoriesMarch 2006 ixSubcommittee on Aluminum PipingD.A. Buchanan AltaGas Utilities Inc.,Leduc, Alberta ChairB.D. Ryder Campbell Ryder Engineering Ltd.,Edmonton, Alberta Vic

40、e-ChairH.E. Allen ATCO Pipelines, Edmonton, Alberta G. Firth Corrpro Canada, Inc.,Edmonton, Alberta M. Hess Altime Engineering,Edmonton, Alberta R.B. Partington Alberta Agriculture, Food and Rural Development,Edmonton, Alberta C. Skocdopole Aluminum Pipe Systems, Eckville, Alberta S. Kalra CSA,Missi

41、ssauga, OntarioProject ManagerZ245.6-06 Canadian Standards Associationx March 2006PrefaceThis is the fourth edition of CSA Z245.6, Coiled aluminum line pipe and accessories. It supersedes the previous editions published in 2002, 1998, and 1992.This edition differs from the previous edition mainly as

42、 follows:(a) the quality program requirements have been modified; and(b) the high-energy joining process for pipe using sleeves has been modified.This Standard covers the requirements for coiled aluminum line pipe and accessories intended to be used for transporting fluids in accordance with CAN/CSA

43、-Z662.This Standard was prepared by the Subcommittee on Aluminum Piping, under the jurisdiction of the Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials and the Strategic Steering Committee on Petroleum and Natural Gas Industry Systems, and has been formally ap

44、proved by the Technical Committee.March 2006Notes: (1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users

45、 of the Standard to judge its suitability for their particular purpose.(3) This publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, bu

46、t not necessarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.(4) CSA Standards are subject to periodic review, and suggestions for their improvement will be refe

47、rred to the appropriate committee.(5) All enquiries regarding this Standard, including requests for interpretation, should be addressed to Canadian Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. Requests for interpretation should(a) define the problem, mak

48、ing reference to the specific clause, and, where appropriate, include an illustrative sketch;(b) provide an explanation of circumstances surrounding the actual field condition; and(c) be phrased where possible to permit a specific “yes” or “no” answer.Committee interpretations are processed in accor

49、dance with the CSA Directives and guidelines governingstandardization and are published in CSAs periodical Info Update, which is available on the CSA Web site atwww.csa.ca. Canadian Standards Association Coiled aluminum line pipe and accessoriesMarch 2006 1Z245.6-06Coiled aluminum line pipe and accessories1Scope1.1 GeneralThis Standard specifies requirements for coiled aluminum line pipe and accessories primarily intended for use in oil and gas pipeline systems.1.2 Pipe diameter and wall thicknessThis Standard specifies requirements for pipe with