CSA C22 2 NO 269 2-2013 Surge protective devices - Type 2 - Permanently connected (First Edition).pdf

《CSA C22 2 NO 269 2-2013 Surge protective devices - Type 2 - Permanently connected (First Edition).pdf》由会员分享，可在线阅读，更多相关《CSA C22 2 NO 269 2-2013 Surge protective devices - Type 2 - Permanently connected (First Edition).pdf（53页珍藏版）》请在麦多课文档分享上搜索。

1、C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together vo

2、lunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and

3、exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-i

4、nfringement of any third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rul

5、e, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIA

6、L OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT,

7、 EVEN IF CSA GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any

8、 person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the informati

9、on contained in this document.CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights a

10、nd ownershipAs between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inven

11、tions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Gr

12、oups and/or others intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsA

13、ttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such pate

14、nt rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form: load this document onto a

15、 computer for the sole purpose of reviewing it; search and browse this document; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have such copies, and only if this Legal Notice

16、 appears on each such copy.In addition, users may not and may not permit others to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any

17、of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of t

18、his Legal Notice.Standards Update ServiceC22.2 No. 269.2-13June 2013Title: Surge protective devices Type 2 Permanently connectedTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for update

19、s to this publication is 2422564.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legalto find out how we protect your personal information.ISBN 978-1-77139-249-5 2013 CSA GroupAll rights reserved. No part of thi

20、s publication may be reproduced to any form whatsoever without the prior permission of the publisher.Published in June 2013 by CSA Group A not-for-profit private sector organization 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6 To purchase standards and related publications, vis

21、it our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association, operating as “CSA Group”Surge protective devices Type 2 Permanently connectedC22.2 No. 269.2-13C22.2 No. 269.2-13Surge protective devices Type 2 Permanently conn

22、ectedJune 2013 2013 CSA Group1ContentsTechnical Committee on Industrial Products 3Subcommittee on Surge Protective Devices 5Preface 71 Scope 82 Reference publications 93 Definitions and abbreviations 113.1 Definitions 113.2 Abbreviations 144 Construction 144.1 General 144.2 Enclosures 154.3 Overcurr

23、ent protection 154.4 Supplementary protectors 164.5 Spacings 164.6 Printed circuit boards 174.7 Wiring 174.8 Bonding 195 Documentation, ratings, and markings 196 Tests 216.1 General test requirements 216.2 Combination wave test 216.3 Nominal discharge current (In) test 226.4 Operating duty cycle tes

24、t 236.5 Temperature test (two port devices or one port/multi terminal) 236.6 Dielectric withstand test 246.7 Mechanical tests 256.7.1 Impact on polymeric enclosures 256.7.2 Impact on observation/display openings 266.7.3 Deflection for metal enclosures and doors 276.7.4 Pigtail connection pull test 2

25、76.8 Short circuit withstand test For two port devices 276.9 Overload behaviour test For two-port devices 296.10 Overvoltage testing 296.10.1 General 296.10.2 Abnormal overvoltage Short circuit current behaviour test 306.10.3 Abnormal overvoltage Intermediate current behaviour test 316.10.4 Abnormal

26、 overvoltage Limited current behaviour test 326.11 Accessibility test for openings in enclosures 336.12 Terminal voltage decay test 33C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group26.13 Capacitor endurance test 336.14 Bonding impedance test 346.15 Ins

27、ulating material tests 346.16 Dielectric voltage-withstand test in lieu of measuring spacings 346.17 Printed circuit board coating test 356.18 Leakage current test 35C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group3Technical Committee on Industrial Prod

28、uctsR.M. Bartholomew Electric Power Equipment Ltd, Vancouver, British ColumbiaRepresenting ProducersChairR. deLhorbe Schneider Electric Canada Ltd, Richmond, British ColumbiaRepresenting ProducersVice-ChairD. Stefancic CSA Group, Mississauga, OntarioProject ManagerRepresenting Regulatory Authorities

29、D.P. Badry Government of Yukon, Whitehorse, YukonD.R. MacLeod Nova Scotia Labour and Advanced Education, Halifax, Nova ScotiaT. Olechna Electrical Safety Authority, Mississauga, OntarioR. Pack SaskPower, Saskatoon, SaskatchewanRepresenting ManufacturersW.K. Jones Eaton, Burlington, OntarioM. Smith R

30、ockwell Automation Canada Inc. Control Systems, Cambridge, OntarioRepresenting General InterestsN. Mancini Mississauga, OntarioD. Mascarenhas Brampton, OntarioC22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group4D.G. Morlidge Fluor Canada Ltd., Calgary, Alb

31、ertaA.Z. Tsisserev Stantec Consulting Ltd, Vancouver, British ColumbiaC22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group5Subcommittee on Surge Protective DevicesT.C. Hartman ATCO Electric , Edmonton, AlbertaChairA. Haa Quality Plus-Consulting, Brooksville

32、, Florida, USAVice-ChairY. Boodram Schneider Electric Canada, Inc., Mississauga, OntarioAssociateR.P. de Lhorbe Schneider Electric Canada, Inc., Richmond, British ColumbiaV.V. Gagachev Eaton, Burlington, OntarioT. Hamden CSA Group, Toronto, OntarioG. Hoepfner Schneider Electric USA, Inc., Salt Lake

33、City, Utah, USAAssociateE. Ko CSA Group, Toronto, OntarioB. McCran Woodbridge, OntarioJ. Moellmann Schneider Electric USA, Inc., Salt Lake City, Utah, USAB.E. Rock Hubbell Incorporated Wiring Device Division, Shelton, Connecticut, USAK.L. Rodel Hubbell Canada LP, Pickering, OntarioR.J. Roeleveld R3b

34、) provide an explanation of circumstances surrounding the actual field condition; andc) where possible, phrase the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing

35、standardization and are available on the Current Standards Activities page at standardsactivities.csa.ca.5) This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following infor

36、mation to inquiriescsagroup.organd include “Proposal for change” in the subject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connec

37、tedJune 2013 2013 CSA Group8C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connected1 Scope1.1 This Standard applies to surge protective devices (SPDs) intended fora) permanently connected applications designed for limiting surge voltages and discharging surge currents;b) use on 50/60

38、 Hz circuits over 42 V and up to 750 V ac;c) installation on the load side of the main overcurrent protective device; andd) indoor or outdoor use in accordance with the Canadian Electrical Code, Part I.1.2 Equipment designed solely for other power disturbances such as notches, sags, and noise is not

39、 within the scope of this document.1.3 SPDs discussed in this Standard contain at least one voltage limiting or voltage switching component for diverting surge currents or dissipating surge energy, or both. Examples of such components are metal oxide varistors, silicon avalanche diodes, spark gaps a

40、nd gas discharge tubes. Ferroresonators, motor- generators, uninterruptible power supplies, and filters containing only inductive or capacitive components are not considered SPDs in this standard.1.4 General requirements applicable to this Standard are given in the latest edition of CAN/CSA-C22.2 No

41、. 0.1.5 In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which

42、 is permissible within the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are considered part of the ta

43、ble or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.C22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group91.6 The values given in SI units are the units of re

44、cord for the purposes of this Standard. The values given in parentheses are for information and comparison only.2 Reference publicationsWhere reference is made to a Standard, such reference shall be considered to refer to the latest available edition and any revision thereto. This Standard refers to

45、 the following such Standards and the year dates shown indicate the latest editions available at the time of printing:CSA GroupC22.1-12Canadian Electrical Code, Part I (“CEC, Part I”)CAN/CSA-C22.2 No. 0-10General RequirementsC22.2 No. 0.2-93 (R2013)Insulation coordinationCAN/CSA-C22.2 No. 0.4-04 (R2

46、009)Bonding of electrical equipmentCAN/CSA-C22.2 No. 0.17-00 (R2009)FlammabilityC22.2 No. 8-M1986 (R2008)Electromagnetic interference (EMI) filtersC22.2 No. 14-13Industrial control equipmentCAN/CSA-C22.2 No. 94.1-07 (R2012)Enclosures for electrical equipment, non-environmental considerationsCAN/CSA-

47、C22.2 No. 94.2-07 (R2012)Enclosures for electrical equipment, environmental considerationsC22.2 No. 106-05 (R2010)HRC-Miscellaneous FusesC22.2 No. 127-09Equipment and lead wiresC22.2 No. 190-M1985 (R2009)Capacitors for power factor correctionCAN/CSA-C22.2 No. 198.1-06 (R2010)Extruded insulating tubi

48、ngC22.2 No. 269.2-13Surge protective devices Type 2 Permanently connectedJune 2013 2013 CSA Group10C22.2 No. 235-04 (R2013)Supplementary protectorsCAN/CSA-C22.2 No. 248.13-00 (R2010)Low-voltage fuses - Part 13: Semiconductor fusesCAN/CSA-C22.2 No. 248.14-00 (R2010)Low-voltage fuses - Part 14: Supple

49、mental fusesC22.2 No. 269.5 (under development)Surge Protective Device Components Type 5Note: The interim document is CSA LTR I-002-2011.CAN/CSA-C22.2 No. 60529-05 (R2010)Degrees of protection provided by enclosures (IP Code)CAN3-C235-83 (R2010)Preferred voltage levels for AC Systems, 0 to 50 000 VCAN/CSA-E60384-14-09Fixed capacitors for use in electronic equipment Part 14: Sectional specifications: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains.ASTM