CEN TS 16555-7-2015 Innovation management - Part 7 Innovation Management Assessment《创新管理 第7部分 创新管理评估》.pdf

《CEN TS 16555-7-2015 Innovation management - Part 7 Innovation Management Assessment《创新管理 第7部分 创新管理评估》.pdf》由会员分享，可在线阅读，更多相关《CEN TS 16555-7-2015 Innovation management - Part 7 Innovation Management Assessment《创新管理 第7部分 创新管理评估》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TS 16555-7:2015Innovation managementPart 7: Innovation Management AssessmentPD CEN/TS 16555-7:2015 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TS16555-7:2015.The UK participation in its preparation was entrusted to Techni

2、calCommittee IMS/1, Innovation management.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards I

3、nstitution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 90305 2ICS 03.100.40; 03.100.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 December

4、2015.Amendments issued since publicationDate Text affectedPD CEN/TS 16555-7:2015TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16555-7 December 2015 ICS 03.100.40; 03.100.50 English Version Innovation management - Part 7: Innovation Management Assessment Management de

5、 linnovation - Partie 7 : valuation du management de linnovation Innovationsmanagement - Teil 7: Bewertung des Innovationsmanagements This Technical Specification (CEN/TS) was approved by CEN on 28 October 2015 for provisional application. The period of validity of this CEN/TS is limited initially t

6、o three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/

7、TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of A

8、ustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw

9、eden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for C

10、EN national Members. Ref. No. CEN/TS 16555-7:2015 EPD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 6 2 Normative references 6 3 Terms and definitions . 7 4 Types of innovation management assessment approaches 8 4.1 General 8 4.2 Check-list a

11、ssessment 8 4.3 Maturity assessment 9 4.4 Benchmarking assessment 9 4.5 Application of the innovation management assessment approaches . 10 5 Guidelines for innovation management assessment 11 5.1 General . 11 5.2 Preparation for the innovation management assessment 11 5.2.1 Defining the need for an

12、d objectives of the innovation management assessment 11 5.2.2 Defining the scope of the innovation management assessment . 13 5.2.3 Identifying the most suitable approach and tool for the innovation management assessment 14 5.3 Execution of the innovation management assessment 15 5.3.1 Timing and te

13、am for the innovation management assessment 15 5.3.2 Conducting the innovation management assessment 16 5.4 Action plan development for improvement of the innovation management system 17 5.4.1 General . 17 5.4.2 Developing the action plan for an improved innovation management system . 17 5.4.3 Docum

14、entation and communication of the innovation management assessment results . 17 5.5 Realization of measurable results from the innovation management assessment . 19 Annex A (informative) Comparison of innovation management assessment methods and finding the right tools . 20 Annex B (normative) Deliv

15、erables and expected impact from innovation management assessment 22 PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 3 European foreword This document (CEN/TS 16555-7:2015) has been prepared by Technical Committee CEN/TC 389 “Innovation management”, the secretariat of which is held by AENOR. Attention

16、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document is not intended for the purpose of certification. The CEN/TS 16555 series consist

17、s of the following parts with the general title Innovation management: Part 1: Innovation management system; Part 2: Strategic intelligence management; Part 3: Innovation thinking; Part 4: Intellectual property management; Part 5: Collaboration management; Part 6: Creativity management; Part 7: Inno

18、vation management assessment. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

19、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 4 Intr

20、oduction Innovation management is critical to achieving and maintaining competitiveness based on the delivery of new products and services or new processes and business models that meet the changing needs and expectations of customers and citizens alike. Many highly successful and innovative organiz

21、ations have developed strong innovation capabilities through the development of innovation management systems and the assessment of performance in this area. There are several reasons for any organization to start the development of innovation management capabilities with an innovation management as

22、sessment. These include: Learning which elements should be part of an innovation management system (see Figure B.1 and CEN/TS 16555-1) and how to assess their performance. Gaining insights into the organizations innovation management capabilities and performance. Gaining insights into how the organi

23、zation compares with competitors regarding innovation management capabilities and performance (benchmarking). Obtaining recommendations and an action plan to close the gap between the current performance and a future ambition of a higher level of innovation management performance. Providing for cust

24、omer and market insights. Preventing the business from becoming obsolete. Keeping the working environment challenging and dynamic, thereby retaining key staff. By carrying out an innovation management assessment, drivers of growth and renewal can be identified. There are many tools and approaches av

25、ailable for an innovation management assessment. Since the situation of each organization and the objective for the innovation management assessment may vary greatly, this Technical Specification will focus on key success factors and the process of an innovation management assessment. It will indica

26、te which insights and impacts an organization might expect from an innovation management assessment. This Technical Specification will thus not provide any specific tools. The organizations innovation management performance can be assessed at any time. There are several steps and decision points tha

27、t may lead to an innovation management assessment as illustrated below: Figure 1 null Decision chain for launching an innovation management assessment PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 5 The organization might be interested in establishing a baseline that will create transparency on the

28、innovation management capabilities and show the need for improvement. In other cases, the level of ambition has increased that will in turn lead to a need for change. Gaps in the innovation management system result in increased urgency to act. This in turn will lead to improvement measures that need

29、 to be defined and prioritized in an action plan. This plan needs to be implemented and monitored to ensure that the gaps have been closed before success can be celebrated. It is important that the management of the organization is prepared to implement the measures to close the identified gaps in o

30、rder to generate the expected value. There needs to be top management commitment, organizational readiness and resources to drive the process from assessing the innovation management performance to successful implementation of the improvement measures. This document will focus more on the innovation

31、 management assessment and less on the implementation of improvement measures which are covered in CEN/TS 16555-1:2013, Clause 10: Improvement of the innovation management system. PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 6 1 Scope This Technical Specification provides guidance on assessing the

32、innovation management system (IMS) and its performance. It describes how organizations can create transparency internally on strengths and weaknesses in their innovation management system. This transparency can be used as a basis to develop effective actions to improve the innovation management capa

33、bilities and performance. Increased innovation management performance is essential for generating value for the organization, its network partners and key stakeholders. This Technical Specification provides guidance on: various types of innovation management assessment approaches; the generic proces

34、s of an effective innovation management assessment; elements of innovation management to assess, including the insights and the impact that can be gained from the innovation management assessment. By using this Technical Specification, organizations are guided to gain an overview of different innova

35、tion management assessment approaches. By knowing these approaches, organisations can design their innovation management assessment. The results of this innovation management assessment are therefore the basis to develop an action plan to improve the capabilities and performance of their innovation

36、management on a continuous basis. This technical specification does not address: recommendations on choosing specific tools for innovation management assessment; the measures for improving innovation management performance; specific benchmarks or scores for the various elements of innovation managem

37、ent; the actual decision-making on improvements and their impact. This Technical Specification can be applied to any innovation management system. However, it is primarily intended to assess the innovation management system as defined in CEN/TS 16555-1. Annex B (normative) of CEN/TS 16555-7, include

38、s the impact expected from an effective innovation management assessment on the innovation management system detailed in CEN/TS 16555-1. This Technical Specification is applicable to all organizations regardless of sector, type, age or size of the organization. However, specific focus has been place

39、d on the applicability for small and medium-sized enterprises. This Technical Specification is not intended for certification purposes. 2 Normative references The following documents, in whole or in part, are normatively referenced and are indispensable for its application. For dated references, onl

40、y the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CEN/TS 16555-1:2013, Innovation Management - Part 1: Innovation Management System PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 7 3 Terms and definitions For the pur

41、poses of this document, the terms and definitions given in CEN/TS 16555-1 and the following apply. 3.1 benchmarking management method comparing systems, processes, approaches across several organizations or companies to identify leading practices which can be implemented within an organization, eith

42、er directly or in an adapted manner 3.2 benchmarking class comparative sample of organizations to determine best practice 3.3 innovation implementation of new or significantly improved product (good or service), process or new marketing method, or new organizational method in business practices, wor

43、kplace organization or external relations SOURCE: CEN/TS 16555-1:2013, 3.1 3.4 innovation capability set of organizational capabilities that are leveraged by the innovation management system to deliver innovation performance Note 1 to entry: Examples of innovation capabilities can include: proficien

44、cy in technologies, strategic intelligence, access to funds, operational functions and processes contributing to measurable innovation results, knowledgeable and experienced people contributing successfully to innovation objective. 3.5 innovation culture behaviour, norms, habits, values, beliefs, sy

45、mbols common to drive innovation in an organization 3.6 innovation enabling factors set of tangible and intangible assets that facilitate the innovation management within an organization, such as IT-systems, IP and its management 3.7 innovation management assessment method to evaluate how well an or

46、ganizations innovation management system contributes to its innovation performance 3.8 innovation management capability set of management skills aiming to implement and further develop the organizations innovation management system PD CEN/TS 16555-7:2015CEN/TS 16555-7:2015 (E) 8 3.9 innovation manag

47、ement system (IMS) set of interrelated or interacting elements of an organization to establish innovation policies and objectives as well as processes to achieve those objectives SOURCE: CEN/TS 16555-1:2013, 3.2 3.10 innovation performance extent to which the innovation objectives have been achieved

48、 3.11 innovation process set of steps with clear input and output that are designed to generate, select and develop ideas into new products, services, processes, organizational or business models 3.12 innovation results value created from innovation management 3.13 innovation strategy general plan t

49、o achieve the organizations vision in how to secure and shape the organizations future based on innovation 3.14 performance level of success that is defined in terms of effectiveness and efficiency of an organization Note 1 to entry: For enterprises, the level of success can be defined by profit related figures such as growth in income from sales, in operational margin, in return on investment, and/or market share 4 Types of innovation management assessment approaches 4.1 General Typical innovation management assessment approache