CAN CSA-ISO IEC 13864-1997 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification functional modu.pdf

《CAN CSA-ISO IEC 13864-1997 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification functional modu.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-ISO IEC 13864-1997 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification functional modu.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、National Standard of Canada CAN/CSA-ISO/IEC 13864-97 International Standard ISO/IEC 13864:1995 (first edition, 1995-11-15) has been adopted without modification as CSA Standard CAN/CSA-ISO/IEC 1386497, which has been approved as a National Standard of Canada by the Standards Council of Canada. ISSN

2、03 I 7-5669 February 1997 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Name identification supplementary services Technologies de Iinforrnation - Telecommunications

3、 et echange dinformatm entre systemes - Reseau prive a integration de services - Specification, modeie fonctionnel et flux d informations - Services supplernentaires didentification de nom Reference number ISO/iEC 13864:7995iE) LAssociation canadienne de normalisation (CSA), sous les auspices de laq

4、uelle cette Norme nationale a it4 prbparee, a requ ses lettres patentes en 1919 et son accreditation au sein du Systkme de normes nationales par le Conseil canadien des norrnes en 1973. Association daffiliation libre, sans but lucratif ni pouvoir de rkglementation, elle se consacre A IBlaboration de

5、 normes et A la certification. Les normes CSA reflhtent le consensus de producteurs et dusagers de partout au pays, au nombre desquels se trouvent des fabricants, des consommateurs, des dktaillants et des representants de syndicats, de corps professionnels et dagences gouvernementales. Lutilisation

6、des normes CSA est trks repandue dans Iindustrie et le commerce, et leur adoption 4 divers ordres de l4gislation, tant municipal et provincial que fhderal, est chose courante, particulihrement dans les domaines de la sant6, de la skcurite, du bitiment, de la construction et de Ienvironnernent. Les C

7、anadiens dun bout A Iautre du pays thoignent de leur appui au travail de normalisation men6 par la CSA en participant bkndvolement aux travaux des comitks de la CSA et en appuyant ses objectifs par leurs cotisations de membres de soutien. Les quelque 7000 volontaires faisant partie des comites et le

8、s 2000 membres de soutien constituent Iensemble des membres de la CSA parmi lesquels ses adrninistrateurs sont choisis. Les cotisations des membres de soutien representent une source importante de revenu pour les services de soutien a la normalisation volontaire. LAssociation offre des services de c

9、ertification et de mise h Iessai qui appuient et complktent ses activitis dans le domaine de 18laboration de normes. De manibre B assurer IintBgritk de son processus de certification, IAssociation procede de faqon rkguliere et continue 4 Iexamen et B Iinspection des produits pcrtant la marque CSA. O

10、utre son si$ge social et ses laboratoires ti Etobicoke, la CSA posskde des bureaux regionaux dans des centres vitaux partout au Canada, de m cet aspect demeure la responsabilitk de Iorganisme rhdacteur de normes accr6dit8. periodiques ; cest pourquoi il est recommand4 aux utilisateurs de se procurer

11、 16dition la plus r6cente de la norme aupres de lorganisme qui Ia prkparke. Une Norme nationale du Canada est une norme, approuvee par le Conseil canadien des normes, qui reflbte une entente raisonnable parmi les points de vue dun certain IintkrGt Lapprobation dune norme en tant que Norme nationaIe

12、du Canada indique quelle est conforme aux mkthodes et critkres Btablis par le Conseil canadien des normes. I1 est recommand6 aux personnes qui ont besoin de normes de se servir des Normes nationales du Canada lorsque la chose est possible. Ces normes font Iobjet dexamens The Standards Council of Can

13、ada is the coordinating body of the National Standards system, a federation of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national interest. The principal objects of the Council are to foster and promote voluntary

14、 standardization as a means 01 advancing the national economy, benefiting the health, safety, and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in the field of standards. A National Standard of Ca

15、nada is a standard which has been approved by the Standards Council of Canada and one which reflects a reasonable agreement among the views 01 a number of capable individuals whose collective interests provide to the greatest practicable extent a balance of representation of producers, users, consum

16、ers, and others with relevant interests, as may be approp,riate to the subject in hand. It normally is a standard which is capable oi making a significant and timely contribution to the national interest. Approval of a standard as a National Standard of Canada indicates that a standard conforms to t

17、he criteria and procedures established by the Standards Council of Canada. Approval does not refer to the technical content of the standard; this remains the continuing responsibility of the accredited standards-development organization. Those who have a need to apply standards are encouraged to use

18、 National Standards of Canada whenever practicable. These standards are subject to periodic review: therefore, users are cautioned to obtain the latest edition from the organization preparing Ihe standard. La responsabilitk dapprouver les Normes nationales du Canada incombe au The responsibility for

19、 approving National Standards of Canada rests with Ihe Conseil canadien des noimes Standards Council 01 Canada 45, rue OConnor, Bureau 1200 45 OConnor Street, Suite 1200 Ottawa, Ontario, K1 P 6N7 Q Canada Ben que le but premier vise par cette norme soit enonce sous sa rubrique Domaine dapplication,

20、il est important de retenir quil incornbe a iufilisateur de juger si la norme convient ii ses besoins particuliers. Although the infended primary application of fbis Standard is stated in its Scope, it is important to note that it remains !be responsibility of the user fo judge its suitability for t

21、heir particular purpose. In formation technology - Telecommunications and information exchange between systems - Private integrated Services Network - Specification, functional model and information flows - Name identification supplementary services CAN/CSA-ISO/IEC 7 3864-97 CANCSA-ISO/IEC 13864-97

22、Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, tknctional model and information flows - Name identipcation supplementary services CSA Preface Standards development within the Information Technology sector is

23、 harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SC

24、C), the IS0 member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T). This International Standard was reviewe

25、d by the CSA TClT under the jurisdiction of the Strategic Steering Committee on Information Technology and deemed acceptable for use in Canada. (A committee membership list is available on request from the CSA Committee Administrator.) From time to time, ISO/IEC may publish addenda, corrigenda, etc.

26、 The CSA TClT will review these documents for approval and publication. For a listing, refer to the CSA Information Products Catalogue or CSA Info Update or contact a CSA Sales representative. This Standard has been formally approved, without modification, by these Committees and has been approved a

27、s a National Standard of Canada by the Standards Council of Canada. February 7997 0 Canadian Standards Association - 7 997. All rights resewed. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior permission of the publisher. lS

28、O/lEC material is reprinted with the permission of the publisher. February 7997 CSA/ I I NTE R NAT IO NAL STANDARD ISO/IEC 13864 First edition 1995-1 1-1 5 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, func

29、tional model and information flows - Name identification supplementary services Technologies de !information - Telecommunications et echange dinformation entre systemes - Reseau prive B integration de services - Specification, modele fonctionnel et flux dinformations - Services supplementaires d ide

30、ntification de nom Reference number ISO/IEC 13864:1995(E) ISO/IEC 13864: 1995(E) Contents I 2 3 Scope Conformance Normative references 4 Definitions 4.1 External Definitions 4.2 Other definitions List of acronyms 5 6 SS-CNIP Stage 1 Description 6.1 Description 6.1 .I General Description 6.1.2 6.2 Pr

31、ocedures 6.2.1 ProvisiotVWithdrawal 6.2.2 Normal Procedures Qualifications on Applicability to Telecommunication Services 6.2.2.1 - 6.2.2.2 Invocation and Operation 6.2.3 Exceptional Procedures 6.2.3.1 Invocation and Operation Interactions with other Supplementary Services and ANFs 6.3.1 Connected N

32、ame Identification Presentation (CONP) 6.3.2 CallingConnected Name Identification Restriction (CN I R) 6.3.3 Calling line Identification Presentation (CLIP) 6.3.4 Connected Line Identification Presentation (COLP) 6.3.5 CallingEonnected Line Identification Restriction (CLIR) 6.3.6 Call Forwarding Unc

33、onditional (CFU) Activation/Deactivation/Registrat ion/lnte rrogat ion 6.3 1 1 1 2 2 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 Q ISO/IEC 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical

34、, including photocopying and microfilm, without permission in writing from the publisher. ISOilEC Copyright Office + Case postale 56 . CH-1211 Geneve 20 Switzerland 11 0 ISOnEC ISOiIEC 13864:1995(E) 6.3.7 Call Forwarding Busy (CFB) 6.3.8 6.3.9 Call Deflection (CD) 6.3.1 0 Call Transfer (CT) 6.3.1 1

35、Completion of Calls to Busy Subscriber (CCBS) 6.3.1 2 Completion of Calls on No Reply (CCNR) 6.3.1 3 Path Replacement (SS-PR) 6.4 Interworking Considerations 6.4.1 Incoming Calls 6.4.2 Outgoing Calls 7 SS-CONP Stage 1 Description Call Forwarding No Reply (CFNR) 6.5 Overall SDL 7,l Description 7.1.1

36、General Description 7.1.2 7.2 Procedures 7.2.1 Provision/Withdrawal 7.2.2 Normal Procedures Qualifications on Applicability to Telecommunication Services 7.2.2.1 Activation/Deactivat ion/Registration/i nterrogation 7.2.2.2 Invocation and Operation 7.2.3.1 Invocation and Operation Calling Name Identi

37、fication Presentation (CNIP) Calling/Connected Name Identification Restriction (CNI R) Calling Line Identification Presentation (CLIP) Connected Line Identification Presentation (COLP) CaIling/Connected tine Identification Restriction (CLIR) 7.2.3 Except io nal Procedures Interactions with other Sup

38、plementary Services and ANFs 7.3.1 7.3.2 7.3.3 7.3.4 7.3.5 7.3.6 Call Forwarding Unconditional (CFU) 7.3.7 Call Forwarding Busy (CFB) 7.3.8 7.3.9 Call Deflection (CDI 7.3.10 Call Transfer (CT) 7.3.1 1 Completion of Calls to Busy Subscribers (CCBS) 7.3.12 Completion of Calls on No Reply (CCNR) 7.3.13

39、 Path Replacement (PR) 7.4 Interworking Considerations 7.4.1 Outgoing Calls 7.4.2 Incoming Calls 7.3 Call Forwarding No Reply (CFNR) 7.5 Overall SDL 8 SS-CNIR Stage 1 Description 8.1 Description 8.1 .I General Description 8.1.2 8.2 Procedures 8.2.1 Provision/Withdrawal 8.2.2 Normal Procedures Qualif

40、ications on applicability to Telecommunication Services 8.2.2.1 Activalion/Deactivation/Registration/t nterrogation 8.2.2.2 Invocation and Operation 8.2.3.1 Invocation and Operation 8.2.3 Exceptional Procedures 5 5 5 5 5 5 5 6 6 6 6 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 12

41、 12 12 12 12 12 12 12 12 13 13 I 111 ISODEC 13864:1995(E) 0 ISO/IEC 8.3 Interactions with other Supplementary Services and ANFs 8.3.1 8.3.2 8.3.3 8.3.4 8.3.5 8.3.6 Call Forwarding Unconditional (CFU) 8.3.7 Call Forwarding Busy (CFB) 8.3.8 8.3.9 Call Deflection (CD) 8.3.10 Call Transfer (CT) 8.3.1 1

42、Completion of Calls to Busy Subscribers (CCBS) 8.3.12 Completion of Calls on No Reply (CCNR) 8.3.13 Path Replacement (PR) 8.4 lnterworking Considerations 8.4.1 Incoming Calls 8.4.2 Outgoing Calls Calling Name Identification Presentation (CNIP) Connected Name Identification Presentation (CONP) Callin

43、g Line Identification Presentation (CLIP) Connected Line Identification Presentation (COLP) CallingKonnected Line Identification Restriction (CLIR) Call Forwarding No Reply (CFNR) 8.5 Overall SDL 9 SS-CNIP Stage 2 Description 9.1 Functional Model 9. I . 1 9.1 -2 9.1.3 Functional Model Description De

44、scription of the Functional Entities Relationship of the Functional Model to the Basic Call Functional Model 9.2 Information Flows 9.2.1 Definition of Information Flows 9.2.1.1 INFORM 1 9.2.1.2 INFORM 2 Relationship of Information Flows to Basic Call Information Flow 9.2.2 9.2.3 Information Flow Seq

45、uences 9.3 The Functional Entity Actions 9.4 Functional Entity Be haviour 9.5 Allocation of Functional Entities to Physical Locations 10 SS-CONP Stage 2 Description 1 0.1 Functional Model 1 0.1 . 1 Functional Model Description 10.1.2 Description of the Functional Entities 10.1.3 Relationship of the

46、Functional Model to the Basic Call Functional Model 1 0.2 Information Flows 10.2.1 Definition of Information Flows 10.2.1.1 INFORM 3 10.2.1.2 INFORM 4 10.2.7.3 INFORM 5 10.2.1.4 tNFORM 6 10.2.1.5 INFORM 7 10.2.1.6 INFORM 8 10.2.2 Relationship of Information Flows to Basic Call Information Flow 10.2.

47、3 Information Flow Sequences 1 0.3 Functional Entity Actions 1 0 -4 Functional Entity Be haviour 13 13 13 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 16 16 16 16 16 16 16 17 17 17 18 18 19 21 22 .2 2 22 22 22 23 23 23 23 24 24 25 25 25 26 27 28 iv o ISOAEC ISOAEC 13864:1995(E) 10.5 Allocation of Fu

48、nctional Entities to Physical Locations 11 SS-CNIR Stage 2 Description 11 .I Functional Model 11 -1.1 Functional Model Description 11.1.2 Description of the Functional Entities 11.1.3 Relationship of the Functional Model to the Basic Call Functional Model 11.2 Information Flows 11.2.1 Definition of

49、Information Flows 11.2.2 Relationship of the Functional Model to the Basic Call Functional 11.2.2 Relationship of Information Flows to Basic Call Information Flows 11 -2.3 Information Flow Sequences Model 11.3 Functional Entity Actions 11.4 Functional Entity Behaviour 11.5 Allocation of Functional Entities to Physical Locations Annex A: Structure and Content of a PlSN Name 30 31 31 31 31 31 32 32 32 32 32 33 33 36 37 ISO/IEC 13864: 199qE) 0 ISOfIEC Foreword IS0 (the International Organization for Standardization) and IEC (the Internalional Electrote