CAN CSA-E598-2-6-1998 Luminaires - Part 2 Particular requirements - Section 6 Luminaires with built-in transformers for filament lamps (First Edition General Instruction No 1 Janua.pdf

《CAN CSA-E598-2-6-1998 Luminaires - Part 2 Particular requirements - Section 6 Luminaires with built-in transformers for filament lamps (First Edition General Instruction No 1 Janua.pdf》由会员分享，可在线阅读，更多相关《CAN CSA-E598-2-6-1998 Luminaires - Part 2 Particular requirements - Section 6 Luminaires with built-in transformers for filament lamps (First Edition General Instruction No 1 Janua.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、Luminaires Partie 2: Rgles particulires Section 6: Luminaires a transformateur intgr pour lampes a filament de tungstOne Luminaires Part 2: Particular requirements Section 6: Luminaires with built-in transformers for filament lamps Numro de rfrence Reference number CEI/IEC 598-2-6: 1994 Norme nation

2、ale du Canada CAN/CSA -E598-2-6-98 National Standard of Canada La norme intemationale CEI/IEC 598-2-6 : 1994 (deuxime edition, 1994-06), y compris 1Amendernent 1:1996, a t adopte, avec exigences propres aux Canada, et porte mairitenant la designation CAN/CSA-E59 Ia Publication 617 de Ia C E I: Symbo

3、les graphiques pour schmas. Les symboles et signes conterius dans la prsente publication oft ete Soit repris des Publications 27 ou 617 de Ia C EL soit spcifiquement approuvs aux fins de cette publication. Publications de Ia C El tablies par le mme Comit dEtndes Lauenrion do lecteur est attire sur I

4、c deuxinie feuillet de is couverture, qui numre les publications de La C E I prparCes par le Comit dEtudes qui a tabli Ia presente publication. The technical content of I E C publications is kept under con- stant review by the I E C, thus ensuring that the content reflects cuiTent technology. Inform

5、ation on the work of revision, the issue of revised edi- tions and amendment sheets may be obtained from I E C National Committees and from the following I E C sources: I E C Bulletin IECYearbook Catalogue of I E C Publications Published yearly Terminology For general terminology, readers are referr

6、ed to I E C Publi- cation 50: International Electrotechnical Vocabulary (1EV), which is issued in the form of separate chapters each dealing with a specific field, the General Index being published as a se- parate booklet. Full details of the 1EV will be supplied on request. The terms and defmitions

7、 contained in the present publication have either been taken from the 1EV or have been specifically approved for the purpose of this publication. Graphical and letter symbols For graphical symbols, and letter symbols and signs approved by the I E C for general use, readers are referred to: I E C Pub

8、lication 27: Letter symbols to be used in electrical technology; I E C Publication 617: Graphical symbols for diagrams. The symbols and signs contained in the present publication have either been taken from IEC Publications 27 or 617, or have been specifically approved for the purpose of this public

9、ation. I E C publications prepared by the same Technical Committee The attention of readers is drawn to the back cover, which lists I E C publications issued by the Technical Committee which has prepared the present publication. Note lutilisateur General InstructionFiche n 2 No. 2oCAN/CSA-E598-2-6-9

10、8 CAN/CSA-E598-2-6-98Septembre 2002 September 2002Titre : Luminaires Partie 2 : Rgles particulires Title: Luminaires Part 2: ParticularSection 6 : Luminaires transformateur intgr pour requirements Section 6: Luminaires with built-inlampes filament de tungstne publie transformers for filament lamps o

11、riginallyinitialement en janvier 1998 published January 1998Les modifications suivantes aux exigences propres au The following revisions to the CanadianCanada ont t officiellement approuves. Elles sont deviations have been formally approved and arepublies dans les feuilles rvises ci-jointes et sont

12、marked by the symbol delta () in the margin onindiques par le symbole delta () dans la marge : the attached replacement pages:Modification Article 6.1 Revised Clause 6.1Ajout Aucun New NoneAbrogation Aucune Deleted NoneLa norme CAN/CSA-E598-2-6-98 comptait CSA Standard CAN/CSA-E598-2-6-98 originally

13、34 pages (CSA/1 CSA/7 et 27 pages de texte). consisted of 34 pages (CSA/1CSA/7 and Elle compte maintenant les pages suivantes : 27 text). It now consists of the following pages:CSA/1CSA/4 dated January 1998 and 127;CSA/1 CSA/4 dates de Janvier 1998 et 1 27 ;etCSA/5 CSA/7 dates de Septembre 2002.andC

14、SA/5CSA/7 dated September 2002.! Insrez les feuilles rvises dans votre exemplaire ! Update your copy by inserting these revisedde la norme pour la tenir jour. pages.! Conservez les pages primes titre de rfrence. ! Keep the pages you remove for reference.CAN/CSA-E598-2-6-98Luminaires Part 2: Particul

15、ar requirements Section 6:Luminaires with built-in transformers for filament lampsSeptember 2002(Replaces p. CSA/5, January 1998) Canadian Standards AssociationCSA/5ForewordCanadian Standards Association provides certification services for manufacturers who, under license fromCSA, wish to use the ap

16、propriate registered CSA Marks on certain products of their manufacture toindicate conformity with CSA Standards.CSA Certification for a number of products is provided in the interest of maintaining agreed-uponstandards of quality, performance, interchangeability and/or safety, as appropriate. Where

17、 applicable,certification may form the basis for acceptance by inspection authorities responsible for enforcement ofregulations. Where feasible, programs will be developed for additional products for which certification isdesired by producers, consumers or other interests.In performing its functions

18、 in accordance with its objectives, CSA does not assume or undertake todischarge any responsibility of the manufacturer or any other party. The opinions and findings of theAssociation represent its professional judgement given with due consideration to the necessarylimitations of practical operation

19、 and state of the art at the time the Standard is processed.Products in substantial accord with this Standard but which exhibit a minor difference or a new featuremay be deemed to meet the Standard providing the feature or difference is found acceptable utilizingappropriate CSA Certification Divisio

20、n Operating Procedures. Products which comply with this Standardshall not be certified if they are found to have additional features which are inconsistent with the intentof this Standard. Products shall not be certifiable if they are discovered to contravene applicable Federallaws or regulations.Te

21、sting techniques, test procedures and instrumentation frequently must be prescribed by the CSA Certification Division in addition to the technical requirements contained in Standards of CSA. Inaddition to markings specified in the Standard the CSA Certification and Testing Division may requirespecia

22、l cautions, markings and instructions that are not specified by the Standard.Some tests required by CSA Standards may be inherently hazardous. The Association neither assumesnor accepts any responsibility for any injury or damage that may occur during or as the result of tests,wherever performed, wh

23、ether performed in whole or in part by the manufacturer or the Association,and whether or not any equipment, facility or personnel for or in connection with the test is furnished bythe manufacturer or the Association.Manufacturers should note that, in the event of the failure of the CSA Certificatio

24、n and Testing Divisionto resolve an issue arising from the interpretation of requirements, there is an appeal procedure: thecomplainant should submit the matter, in writing, to the Secretary of the Canadian StandardsAssociation.If this Standard is to be used in obtaining CSA Certification please rem

25、ember, when making applicationfor certification, to request all current Amendments, Bulletins, Notices and Technical Information Lettersthat may be applicable and for which there may be a nominal charge. For such information or forfurther information concerning details about CSA Certification please

26、 address your inquiry to theApplications and Records Section, Canadian Standards Association, 178 Rexdale Boulevard, Rexdale(Toronto), Ontario M9W 1R3.CAN/CSA-E598-2-6-98Luminaires Partie 2 : Rgles particulires Section 6 : Luminaires transformateur intgr pour lampes filament de tungstneCSA/6 Associa

27、tion canadienne de normalisation (Remplace p. CSA/6, Janvier 1998)Septembre 2002Exigences propres au CanadaLa norme internationale CEI/IEC 598-2-6:1994 (deuxime dition), y compris lAmendement 1:1996, a servi llaboration de la norme CAN/CSA-E598-2-6. Cette norme contient les exigences propres auCanad

28、a qui suivent en plus de celles nonces dans la norme CAN/CSA-E60598-1:02.6.1 Domaine dapplication)Ajouter ce qui suitCette norme vise la scurit des appareils conus pour tre installs sur des drivations dune tensionnominale dau plus 600 V entre conducteurs, conformment la norme CSA C22.1-02, Code cana

29、diende llectricit, Premire partie. Note 1A : Les fabricants qui conoivent des produits destins au march canadien pourront trouver unrsum utile des exigences du Code canadien de llectricit, Premire partie relatives aux appareils dans lapublication spciale CSA SPE-2000-94, Guide for Electrical Equipme

30、nt for Installation and Use in Canada.Les luminaires de classe 0 sont interdits.CAN/CSA-E598-2-6-98Luminaires Part 2: Particular requirements Section 6:Luminaires with built-in transformers for filament lampsSeptember 2002(Replaces p. CSA/7, January 1998) Canadian Standards AssociationCSA/7Canadian

31、DeviationsInternational Standard CEI/IEC 598-2-6:1994 (second edition), including Amendment 1:1996, forms thebasis for CSA Standard CAN/CSA-E598-2-6, which contains the following deviations in addition to thoseshown in CSA Standard CAN/CSA-E60598-1:02.6.1 Scope)Add the followingThis Standard applies

32、 to the safety of such equipment designed to be installed on branch circuits notexceeding 600 V nominal or less between conductors in accordance with the rules of CSA StandardC22.1-02, Canadian Electrical Code, Part I.Note 1A: Manufacturers designing products for use in Canada may find a helpful sum

33、mary of the equipment-relatedrequirements of the Canadian Electrical Code, Part I, in CSA Special Publication SPE-2000-94, Guide for ElectricalEquipment for Installation and Use in Canada. Class 0 luminaires are not permitted.General Instruction No. 1CAN/CSA-E598-2-6-98January 1998Title: Luminaires

34、Part 2: Particular requirements Section 6: Luminaires with built-in ransformers for filament lampsPagination: 35 pages (CSA/1CSA/8 and 27 text)To register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to regist

35、er for updates to this publication is 2006136.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.Note lutilisateur Fiche n 1CAN/CSA-E598-2-6-98Janvier 1998

36、Titre : Luminaires Partie 2: Rgles particulires Section 6: Luminaires transformateur intgr pour lampes filament de tungstneNombre de pages : 35 pages (CSA/1 CSA/8 et 27 pages de texte)Vous devez vous inscrire pour recevoir les avis transmis par courriel au sujet des mises jour apportes ce document :

37、allez au shop.csa.cacliquez sur Service de mises jourLe numro didentification dont vous avez besoin pour vous inscrire pour les mises jour apportes ce document est le 2006136.Si vous avez besoin daide, veuillez nous contacter par courriel au techsupportcsagroup.org ou par tlphone au 416-747-2233.Con

38、sultez la politique du Groupe CSA en matire de confidentialit au csagroup.org/legal pour savoir comment nous protgeons vos renseignements personnels.LAssoclatlori canadlenne do normailsatlon (CSA), sous les auspices de laquelle cette Norma nationale a t prOparee, a reu ses lettres patentes en 1919 e

39、t son accreditation au sein du Systme de normos nalionales par le Conseil canadien des normes en 1973. Association daffiliation libro, sans but lucratif ni pouvoir de rglementation, elle se consacre a lOlabcration de normes of a a certification. Los norrnes CSA rofltent te consensus de producteurs e

40、t dusagers do partout au pays, au nombre dosquels se trouvent dos fabricants, des consommateurs, des dtaillants et des representants de syndicats, do corps professionnols et dagences gouvernementales. Lutilisation des normes CSA est Irs repandue dans lindustrie et a commerce, et leur adoption a dive

41、rs ordres de legislation, tant municipal et provincial quo fdral, est chose courante, particulirement dans los domaines de Ia sante, do Ia scurit, du btiment, de a construction at de lenvironnement. Los Canadiens dun bout a lautre du pays temoignent de leur appui au travail do normalisation men par

42、Ia CSA en participant bnvolement aux travaux des comits do Ia CSA et on appuyant sos objectits par leurs cotisations do membres do soution. Los quelque 7000 volontaires faisant partie des comits et les 2000 membres do soution constituent lonsernble des membres do Ia CSA parmi lesquels sos administra

43、teurs sent choisis. Los cotisations des membres do soutien reprsentent une source importanto do revenu pour los services do soutien a a normalisation volontaire. LAssociation off re des services do certification et do mise a Iessai qui appuient et completent sos activits dans to domaine de llaborati

44、on do normes. Do maniere a assurer lintegrite de son processus do certification, lAssociation procde de facon reguliOre et continue a Iexamon et a inspection des produits portant Ia marque CSA. Outre son siege social et ses laboratoires a Etobicoke, Ia CSA possedo des bureaux rgionaux dans des centr

45、es vitaux partout au Canada, do memo quo des agencos dinspection et dessai dans huit pays. Depuis 1919, Association a parfait los connaissancos techniques qul lui perrnettentde remplir sa mission dentreprlse, a savoir Ia CSA est un crganisme de services independant dont Ia mission est doff rir une t

46、ribune libre at efficace pour Ia ralisation dactivits facilitant lechange do biens et do services par lintermdiaire do services do normalisation de certification of autres, pour rpondre aux bosoms do nos clients, tant a lcholle nationale quintemationale. The Canadian Standards Association (CSA), und

47、er whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged in standards development and certification acti

48、vities. CSA standards reflect a national consensus of producers and users including manufacturers, consumers, retailers, unions and professional organizations, and governmental agencies. The standards are used widely by industry and commerce and often adopted by municipal, provincial, and federal go

49、vernments in their regulations, particularly in the fields of health, safety, building and construction, and the environment. Individuals, companies, and associations across Canada indicate their support for CSAs standards development by volunteering their time and skills to CSA Committee work and supporting the Association