BS PD CLC TR 50452-2007 Railway applications — Radio remote control system of traction nvehicle for freight traffic in multiple traction operation《轨道交通 多种牵引货中货运牵引车的无线电遥控系统》.pdf

《BS PD CLC TR 50452-2007 Railway applications — Radio remote control system of traction nvehicle for freight traffic in multiple traction operation《轨道交通 多种牵引货中货运牵引车的无线电遥控系统》.pdf》由会员分享，可在线阅读，更多相关《BS PD CLC TR 50452-2007 Railway applications — Radio remote control system of traction nvehicle for freight traffic in multiple traction operation《轨道交通 多种牵引货中货运牵引车的无线电遥控系统》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58vehicle for freight traffic in multiple traction operationICS 33.200; 45.020; 45.060.10Railway appl

2、ications Radio remote control system of traction PUBLISHED DOCUMENTPD CLC/TR 50452:2007CLC/TR 50452:2007This Published Document was published under the authority of the Standards Policy and Strategy Committee on 29 June 2007 BSI 2007ISBN 978 0 580 52931 3Amendments issued since publicationAmd. No. D

3、ate CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.National forewordThis Published Document was published by BSI. It is the UK implementation of CLC/TR 50452:2007. It supersedes PD R009-005:2001 which

4、 is withdrawn. The UK participation in its preparation was entrusted by Technical Committee GEL/9, Railway electrotechnical applications, to Subcommittee GEL/9/1, Signalling and communications.A list of organizations represented on this committee can be obtained on request to its secretary.TECHNICAL

5、 REPORT CLC/TR 50452 RAPPORT TECHNIQUE TECHNISCHER BERICHT May 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC

6、 - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. CLC/TR 50452:2007 E ICS 33.200;45.020 Supersedes R009-005:2001English version Railway applications Radio remote control system of traction vehicle for freight traffic in multiple traction oper

7、ation Applications ferroviaires Systme de radiocommande distance des locomotives et locotracteurs affects au trafic Fret en exploitation en traction multiple Bahnanwendungen Funkfernsteuerung von Triebfahrzeugen fr Gterbahnen im Multitraktionsbetrieb This Technical Report was approved by CENELEC on

8、2006-02-18. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, R

9、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CLC/TR 50452:2007 2 Foreword This Technical Report was prepared by SC 9XA, Communication, signalling and processing systems, of Technical Committee CENELEC TC 9X, Electrical and electronic applications for railways. The t

10、ext of the draft was circulated for vote in accordance with the Internal Regulations, Part 2, Subclause 11.4.3.3 and was approved by CENELEC as CLC/TR 50452 on 2006-02-18. This Technical Report supersedes R009-005:2001. _ 3 CLC/TR 50452:2007 Contents Introduction 4 1 General4 2 Typical examples in m

11、ultiple traction applications5 3 Information for risk analysis 6 4 Track infrastructure 6Annex A - Typical multitraction application examples .7 CLC/TR 50452:2007 4 Introduction The purpose of this Technical Report is to serve as a guideline for the application of radio remote control system of trac

12、tion vehicles for multitraction operation. The European Standard EN 50239 is applicable for the radio remote control system of traction vehicles for freight traffic. This standard sets out 14 application examples. It does not include an example of multitraction operation; it only includes an example

13、 whereby a traction vehicle is controlled by an appropriate driving trailer in a train consist (example 13 of EN 50239). This Technical Report is based on EN 50239 and provides an indication of the additional requirements relevant for the multitraction application. 1 General Multitraction is used wh

14、enever the tractive effort of the traction vehicle is not sufficient for the particular operational application, different independent trains are linked together to form a longer train consist. In a train consist with more than one traction vehicle, one of the traction vehicles is always the Leading

15、 Traction Vehicle (LTV). The other traction vehicles contained in the overall train consist are controlled and monitored by the LTV. This arrangement means that communication between the different traction vehicles is necessary. Communication can be achieved by means of a cable link or a radio link.

16、 A radio link is for example necessary whenever there are wagons between the traction vehicles and whenever these wagons do not have any communication cables with appropriate infrastructure. Commands are generally sent by the operating personnel only to the LTV. If there are wagons between the tract

17、ion vehicles, the effect of longitudinal dynamic effort and braking behaviour must be taken into consideration during risk analysis. This is applicable particularly when the overall train consist or individual train segments are very long and/or heavy. It should be possible for every traction vehicl

18、e to be used as a LTV or as a Guided Traction Vehicle (GTV) in the train consist. In all circumstances the operator should have a clear view of the track in the direction of travel. With a radio link, particular attention should as a minimum be given to the following points: Allocation of traction v

19、ehicles in the train consist - location and address of the GTV and LTV in the train consist; - definition of direction of travel for each traction vehicle; - it should be impossible for any LTV to control any GTV from another train consist at any time. 5 CLC/TR 50452:2007 Consideration of special as

20、pects of a radio link - maximum number of all traction vehicles in a radio system: - unique address for each traction vehicle, - address stock, - number of traction vehicles or trains that can be simultaneously operated in the area of coverage, - response time; - radio response times; - radio interf

21、erence/radio interruption: - local infrastructure (e.g. stationary repeaters), - train consist equipment (e.g. multiple receivers and repeaters on the train), - radio transmission system (see 9.2.4 of EN 50239): - EN 50159-1 closed transmission system, or - EN 50159-2 open transmission system; - are

22、a of application; - consideration given to regulations in the country of use; - availability of the radio channel: - exclusive or non-exclusive frequencies in the area of application, - guaranteed time for connection establishment or command transmission depending on the assigned frequency channel.

23、Response after radio interruption (by the operator and/or automatically by the train consist) - depending on the train length and weight involved; - depending on whether the Brake Pipe (BP) is segmented or unsegmented; - depending on the train speed; - depending on the duration of radio interruption

24、; - depending on the local topography (e.g. tunnels). 2 Typical examples in multiple traction applications The following fundamental distinctions are made for applications: segmented or unsegmented BP; operation of LTV - by means of portable transmitter outside the train consist, - on a driving trai

25、ler, - on the LTV; braking via BP only from the LTV or from several points in the train consist; two or more traction vehicles in the train consist. CLC/TR 50452:2007 6 Five typical combination examples are set out AnnexA. 3 Information for risk analysis Example 13 of EN 50239 describes a situation

26、in which one traction vehicle is controlled by means of radio remote control from an appropriate cabin. The conditions specified for the equipment of the drivers cab are also applicable as minimum requirements for multitraction operation. The safety level as defined in EN 50239 is based on unsegment

27、ed BP over the complete train consist. If a segmented BP is used additional measures shall be taken to maintain the same safety level as a minimum. For the special situation in which a multitraction train consist is controlled by means of a portable remote control transmitter outside the drivers cab

28、, the risk considerations of examples 1-12 detailed in EN 50239 can also be taken into consideration. However, the safety-relevant functions detailed in Tables A.1 A.4 of EN 50239 should be extended to include the following safety-relevant functions for multitraction operation: 1) Coordination of po

29、wer/throttle and brake control If an error occurs in the coordination of the power/throttle and brake control between the traction vehicles this may result in a dangerous situation. If coordination is no longer possible (e.g. as a result of the radio link being interrupted), risk reduction measures

30、are carried out, particularly with respect to ensuring compliance with the braking distances and ensuring protection against derailing. These measures can be carried out by the operator and/or by means of an automatic system response. 2) Unintended train separation If a segmented BP is used the inte

31、grity of the train consist (i.e.no loss of vehicles or wagons) shall be monitored with additional measures. 4 Track infrastructure In general, due consideration should be given to the local circumstances and the regulations of the countries of use with respect to existing track infrastructure, e.g.:

32、 signal or block section lengths; length of siding(overtaking) tracks. 7 CLC/TR 50452:2007 Annex A Typical multitraction application examples 1.) Controlled by portable transmitter Unsegmented MAP, controlled on one side MAPLTV GTV portable2.) Controlled by traction vehicle Unsegmented MAP, controll

33、ed on one side MAPLTV GTV 3.) Controlled by traction vehicle Unsegmented MAP, controlled on both sides MAPLTV GTV MAPLTV GTV LTVGTV 4.) Controlled by traction vehicle Segmented MAP, each MAP controls its MAP segment 5.) Controlled by traction vehicle Unsegmented MAP, controlled by all traction vehic

34、les GTVAnnex Combination examples of ltit tiMAPMAP = Main Air Pipe LTV = Leading Traction VehicleGTV = Guided Traction Vehicle PD CLC/TR BSI389 Chiswick High RoadLondonW4 4AL50452:2007BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. I

35、t presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of

36、 BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)2

37、0 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Custom

38、er Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British St

39、andards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on

40、 all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these an

41、d other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at

42、http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval syst

43、em or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.