BS ISO 22369-2-2010 Crop protection equipment Drift classification of spraying equipment Classification of field crop sprayers by field measurements《农作物保护设备 喷射装置冲头分类 现场测量野外农作物喷雾器的分.pdf

《BS ISO 22369-2-2010 Crop protection equipment Drift classification of spraying equipment Classification of field crop sprayers by field measurements《农作物保护设备 喷射装置冲头分类 现场测量野外农作物喷雾器的分.pdf》由会员分享，可在线阅读，更多相关《BS ISO 22369-2-2010 Crop protection equipment Drift classification of spraying equipment Classification of field crop sprayers by field measurements《农作物保护设备 喷射装置冲头分类 现场测量野外农作物喷雾器的分.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 22369-2:2010Crop protection equipment Drift classification of sprayingequipmentPart 2: Classification of field crop sprayersby field measurementsBS ISO 22369-2:2010 BRITIS

2、H STANDARDNational forewordThis British Standard is the UK implementation of ISO 22369-2:2010.The UK participation in its preparation was entrusted to TechnicalCommittee AGE/15, Equipment for crop protection and applicationof liquid fertilizer.A list of organizations represented on this committee ca

3、n beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 57818 2ICS 65.060.40Compliance with a British Standard cannot confer immunity fromlegal obligation

4、s.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2010.Amendments issued since publicationDate Text affectedBS ISO 22369-2:2010Reference numberISO 22369-2:2010(E)ISO 2010INTERNATIONAL STANDARD ISO22369-2First edition2010-01-15Crop p

5、rotection equipment Drift classification of spraying equipment Part 2: Classification of field crop sprayers by field measurements Matriel de protection des cultures Classification de la drive des matriels de pulvrisation Partie 2: Classification des pulvrisateurs rampes par mesurage au champ BS ISO

6、 22369-2:2010ISO 22369-2:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the ed

7、iting. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can b

8、e found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat a

9、t the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

10、either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reservedBS ISO 22369-2:2010

11、ISO 22369-2:2010(E) ISO 2010 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Ea

12、ch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internatio

13、nal Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standar

14、ds adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject

15、of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 22369-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection. ISO 22369 consists of the following par

16、ts, under the general title Crop protection equipment Drift classification of spraying equipment: Part 1: Classes Part 2: Classification of field crop sprayers by field measurements The following part is under preparation: Part 3: Potential spray drift measurement for field crop sprayers by the use

17、of a test bench BS ISO 22369-2:2010ISO 22369-2:2010(E) iv ISO 2010 All rights reservedIntroduction ISO 22369 (all parts) specifies the drift classification of spraying equipment. ISO 22369-1 defines the spray drift reduction classes. The other parts of ISO 22369 specify the test procedures and, ther

18、efore, ISO 22369-1 is intended to be used in combination with one of the other parts of ISO 22369. Spray drift of plant protection products can contaminate non-target or sensitive areas, such as surface water hence minimum spray distances or buffer zones, are often specified. Using sprayers and/or s

19、prayer parts, which reduce levels of spray drift, can enable these distances to be reduced. Drift classification procedures for sprayers and sprayer parts facilitate decision making by the farmer and can be of interest in defining best practice or for regulation/legislation. Spray drift can occur as

20、 airborne drift and ground sedimentation of drift fallout. Classification in this part of ISO 22369 is based on the comparison of levels of ground sedimentation from spraying equipment (for example sprayers or parts of sprayers) with reference spraying systems based on the use of spraying equipment

21、according to good agricultural practice for plant protection in different regions and crops. Spray drift deposition or collection is measured at different distances from the target area and the drift reducing performance of the spraying equipment is rated against a reference spraying system. The obj

22、ect of ISO 22369 (all parts) is to provide uniform procedures for the determination of the drift reducing performance of spraying equipment. BS ISO 22369-2:2010INTERNATIONAL STANDARD ISO 22369-2:2010(E) ISO 2010 All rights reserved 1Crop protection equipment Drift classification of spraying equipmen

23、t Part 2: Classification of field crop sprayers by field measurements 1 Scope This part of ISO 22369 specifies the drift classification procedure for field crop sprayers by field measurements of spray drift sedimentation in conformity with ISO 22866, including the test methods and evaluation criteri

24、a needed. It also allows the allocation of the spray drift reduction classes specified by ISO 22369-1. This part of ISO 22369 is intended to determine the drift reducing performance of field crop sprayers by comparison with a reference spraying system in order to rate (classify) the field crop spray

25、ers. The application of this part of ISO 22369 can support advisory services for farmers, product development and legal certification and classification schemes. This part of ISO 22369 is intended to be used together with ISO 22369-1. This part of ISO 22369 is applicable to mounted, trailed and self

26、-propelled field crop sprayers used in field crops. 2 References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend

27、ments) applies. ISO 22369-1, Crop protection equipment Drift classification of spraying equipment Part 1: Classes ISO 22866, Equipment for crop protection Methods for field measurement of spray drift BS ISO 22369-2:2010ISO 22369-2:2010(E) 2 ISO 2010 All rights reserved3 Terms and definitions For the

28、 purposes of this document, the terms and definitions given in ISO 22369-1 and ISO 22866 and the following apply. 3.1 zone 1 1 m to 5 m zone zone which is downwind and adjacent to the directly sprayed zone and which is at a distance of between 1 m and 5 m from the directly sprayed zone See Figure 1.

29、 3.2 zone 2 to zone 10 5 m to 10 m zone to 45 m to 50 m zone zones which are downwind and further away from the directly sprayed zone, and which are 5 m apart and between 5 m and 50 m from the directly sprayed zone See Figure 1. 3.3 zone 11 zone which is downwind and used for assessing the drift, wh

30、ich consists of one specific, several or all zones from zone 1 to zone 10 and which is at a distance of 1 m up to 50 m from the directly sprayed zone For the 1 m to 50 m example, see Figure 1. Dimensions in metres Key a zone 1 b zone 2 c zone 3 d zone 4 e zone 5 f zone 6 g zone 7 h zone 8 i zone 9 j

31、 zone 10 k zone 11 m wind direction (as specified in ISO 22866) n directly sprayed zone Figure 1 Zone 1 (1 m to 5 m) to zone 11 (1 m to 50 m) BS ISO 22369-2:2010ISO 22369-2:2010(E) ISO 2010 All rights reserved 34 Classification The classification is based on the comparison of the candidate spraying

32、equipment (field crop sprayer to be specified) with the reference spraying system (see 5.2). The classification may include classes A to F (see ISO 22369-1) and may be done for one, several or all zones specified in Figure 1. The classification of the spraying equipment depends on the amount of redu

33、ction in soil sediments of the spray drift determined by field measurements (see 5.1), compared with the spray drift deposition of the reference spraying system (see 5.2), in a comparative measurement at the same time and weather and crop condition. The classification is based on the evaluation (see

34、 5.3). 5 Drift classification procedure 5.1 Measurements The measurements shall be carried out in accordance with ISO 22866 and downwind from the edge of the directly sprayed zone. The soil sediments shall be measured in one, several or all zones specified in Figure 1 and at least at the distances t

35、o the directly sprayed zone shown in Table 1. NOTE Additional zones can be added in case of special interests. Table 1 Distances for ground sediment measurements Zone Distance to the sprayed zone m Zone Distance to the sprayed zone m 1 (1 m to 5 m) 1, 3, 5 7 (30 m to 35 m) 30, 35 2 (5 m to 10 m) 5,

36、10 8 (35 m to 40 m) 35, 40 3 (10 m to 15 m) 10, 15 9 (40 m to 45 m) 40, 45 4 (15 m to 20 m) 15, 20 10 (45 m to 50 m) 45, 50 5 (20 m to 25 m) 20, 25 11 1, 5, 10, 20, 30, 40, 50 6 (25 m to 30 m) 25, 30 5.2 Reference spraying system The reference spraying system is defined by the equipment-related data

37、 (as given in Table 2), crop-related data (as given in Table 3) and meteorological data (as given in Table 4). The crop-related data shall be the same and the meteorological data shall be as similar as practicable for the candidate and the reference spraying equipment and shall be specified. Due to

38、the different good agricultural practices for plant protection in different regions and crops, the modification of the reference spraying system may be necessary. However, to allow international comparison of measurements, any classification scheme shall include data derived with the equipment as gi

39、ven in Table 2. NOTE The comparison of classification is limited due to differences in the reference spraying system caused by variation in crop-related data and metrological data. BS ISO 22369-2:2010ISO 22369-2:2010(E) 4 ISO 2010 All rights reservedTable 2 Equipment-related data Nozzle type Compara

40、ble with ISO 25358aSpray pressure See above Nozzle size Borderline nozzle, fine/mediumbNozzle height above target 50 cm Driving speed 6 km/h to 8 km/h a Under preparation. b Typically used in north-western Europe.Table 3 Crop-related data Type of crop Crop condition and growth stage Physical descrip

41、tion (including height of crop) Table 4 Meteorological data Wind speed Wind direction Air temperature Air humidity 5.3 Statistical evaluation and classification The candidate spraying equipment is classified in a drift reduction class if no median value for the respective zone is statistically signi

42、ficantly higher than the respective percentage of the drift value from the reference spraying system for that zone. This shall be evaluated by use of the Wilcoxon signed-rank test or the Students t-test for each measuring distance. The choice of the statistical test (Wilcoxon or Students t-test) sha

43、ll be made according to the distribution of the values. BS ISO 22369-2:2010ISO 22369-2:2010(E) ISO 2010 All rights reserved 5Bibliography 1 ISO 22856, Equipment for crop protection Methods for the laboratory measurement of spray drift Wind tunnels 2 ISO 25358, Crop protection equipment Droplet-size

44、spectra from atomizers Measurement and classification 3 ASAE 572, Spray nozzle classification by droplet spectra BS ISO 22369-2:2010ISO 22369-2:2010(E) ICS 65.060.40 Price based on 5 pages ISO 2010 All rights reserved This page deliberately left blankBSI is the independent national body responsible

45、for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters38

46、9 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and se

47、rv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Memb

48、ers an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Sho

49、p on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Informati