BS ISO 22241-3-2017 Diesel engines -- NOx reduction agent AUS 32 Part 3 Handling transportation and storage《柴油机 NOx还原剂AUS 32 第3部分 搬运、运输和存储》.pdf
《BS ISO 22241-3-2017 Diesel engines -- NOx reduction agent AUS 32 Part 3 Handling transportation and storage《柴油机 NOx还原剂AUS 32 第3部分 搬运、运输和存储》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 22241-3-2017 Diesel engines -- NOx reduction agent AUS 32 Part 3 Handling transportation and storage《柴油机 NOx还原剂AUS 32 第3部分 搬运、运输和存储》.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、Diesel engines NOx reduction agent AUS 32Part 3: Handling, transportation, and storageBS ISO 222413:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Diesel engines NOx reduction agent AUS 32 Part 3: Handling, transportation, and storageMoteurs diesel Agen
2、t AUS 32 de rduction des NOx Partie 3: Manipulation, transport et stockageINTERNATIONAL STANDARDISO22241-3Second edition2017-04Reference numberISO 22241-3:2017(E)National forewordThis British Standard is the UK implementation of ISO 222413:2017. It supersedes BS ISO 222413:2008, which is withdrawn.T
3、he UK participation in its preparation was entrusted to Technical Committee MCE/22, Engines for road vehicles.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Use
4、rs are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92543 6ICS 43.060.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of
5、 the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 222413:2017 ISO 2017Diesel engines NOx reduction agent AUS 32 Part 3: Handling, transportation, and storageMoteurs diesel Agent AUS 32 de rduction des N
6、Ox Partie 3: Manipulation, transport et stockageINTERNATIONAL STANDARDISO22241-3Second edition2017-04Reference numberISO 22241-3:2017(E)BS ISO 222413:2017ISO 22241-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless other
7、wise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address b
8、elow or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 222413:2017ISO 22241-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUM
9、ENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written p
10、ermission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 22241-3:2017(E)For
11、eword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 General requirements and recommendations 24.1 Requirements for use of materials compatible with AUS 32 24.1.1 General 24.1.2 Recommended materials 24.1.3 Materials not recommended . 34.2 Physical conditions during transportation
12、 and storage 34.2.1 General recommendation . 34.2.2 Shelf life . 34.3 Cleanliness of surfaces in contact with AUS 32. 44.4 Recommendation on further properties. 45 Quality assurance 45.1 General . 45.2 Sampling . 45.3 Testing 55.4 Procedures for product release and handling of non-conforming product
13、 55.5 Quality monitoring 65.5.1 General 65.5.2 Audits . 65.5.3 Documentation 66 Procedures for handling of containers and equipment . 76.1 General . 76.2 Single use non-bulk containers . 76.3 Dedicated bulk operation 76.4 Non-dedicated bulk operation. 8Bibliography 9 ISO 2017 All rights reserved iii
14、Contents PageBS ISO 222413:2017ISO 22241-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each
15、member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
16、 Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different ty
17、pes of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not
18、 be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is i
19、nformation given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organizatio
20、n (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 34, Propulsion, powertrain and powertrain fluids.This second edition cancels and replaces
21、the first edition (ISO 22241-3:2008), which has been technically revised by adding a variety of editorial changes throughout the document and by adding flexible compliance methodology to 5.5.1.A list of all parts in the ISO 22241 series can be found on the ISO website.iv ISO 2017 All rights reserved
22、BS ISO 222413:2017ISO 22241-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i
23、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn
24、ical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO do
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO2224132017DIESELENGINESNOXREDUCTIONAGENTAUS32PART3HANDLINGTRANSPORTATIONANDSTORAGE 柴油机 NOX 还原剂 AUS32
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-586365.html