BS ISO 18582-1-2016 Fluid power Specification of reference dictionary General overview on organization and structure《流体传动 参考字典规范 组织和结构的总体综述》.pdf

《BS ISO 18582-1-2016 Fluid power Specification of reference dictionary General overview on organization and structure《流体传动 参考字典规范 组织和结构的总体综述》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 18582-1-2016 Fluid power Specification of reference dictionary General overview on organization and structure《流体传动 参考字典规范 组织和结构的总体综述》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 18582-1:2016Fluid power Specification ofreference dictionaryPart 1: General overview on organizationand structureBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 18582-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation

2、 of ISO 18582-1:2016. The UK participation in its preparation was entrusted to Technical Committee MCE/18, Fluid power systems and components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessa

3、ry provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87097 2 ICS 23.100.01 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard wa

4、s published under the authority of the Standards Policy and Strategy Committee on 31 July 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 18582-1:2016 ISO 2016Fluid power Specification of reference dictionary Part 1: General overview on organization and structur

5、eTransmissions hydrauliques et pneumatiques Spcification dun dictionnaire de rfrence Partie 1: Aperu gnral sur lorganisation et la structureINTERNATIONAL STANDARDISO18582-1First edition2016-07-01Reference numberISO 18582-1:2016(E)BS ISO 18582-1:2016ISO 18582-1:2016(E)ii ISO 2016 All rights reservedC

6、OPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet,

7、 without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.o

8、rgBS ISO 18582-1:2016ISO 18582-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Principles of specification 14.1 Set of attributes for description of a property . 14.2 Set of attributes for description of a class . 24.3 Basic structure of reference di

9、ctionary . 34.3.1 General 34.3.2 Basic structure of the hierarchic order of the definition classes 34.3.3 Allocation of properties for basic quantities within the hierarchic order of definition classes . 34.3.4 Basic structure of the hierarchic order of the application classes 45 Basic structure of

10、the reference dictionary for fluid power . 45.1 General . 45.2 Definition classes 55.3 Properties 55.4 Application classes 5Annex A (informative) Basic definitions and underlying principles from ISO Guide 77-2 7Annex B (informative) Example for the classification of a cylinder to show the relation b

11、etween application classes and definition classes .10Bibliography .11 ISO 2016 All rights reserved iiiContents PageBS ISO 18582-1:2016ISO 18582-1:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The wo

12、rk of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governm

13、ental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in th

14、e ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possi

15、bility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of

16、 patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as i

17、nformation about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 131, Fluid power systems, Subcommittee SC 1, Symbols, terminology and c

18、lassifications.iv ISO 2016 All rights reservedBS ISO 18582-1:2016ISO 18582-1:2016(E)IntroductionModern business operations known collectively as e-Business and including e-Marketplaces, e-Product catalogues and Lifecycle Management are characterized by the following.a) Complex structures of the prod

19、uct lifecycleIn each step of the product lifecycle (ranging from the first idea through development, manufacture, distribution, use and disposal of the product), information from another step or steps is required; moreover, new additional information is generated. Numerous parties and processes are

20、involved in or form part of the product lifecycle. Hence, information needs to be transferred to or exchanged between those parties and processes, across company internal interfaces and across interfaces to external business partners (such as other manufacturers, suppliers and customers).To ensure s

21、uccessful handling of these business operations, it is essential that the communication between parties and processes involved be independent from individual agreements on data and that the data, once created, be readily usable by other parties and in other processes without a need for conversion me

22、chanisms.b) Availability of new electronic mediaTo take advantage of the economic potential of these new media, product information provided by various suppliers needs to be clear and unambiguous (inter-comparable) for a potential buyer.The requirement arising from both of these aspects is that the

23、description of products and processes are: uniformly consistent and unambiguous; neutral (neither company-specific nor software-specific nor product-specific); available in electronic form for ready use without conversion.This is generally true for any business area.For the business area of fluid po

24、wer systems, the situation that led to the decision to prepare ISO 18582 were:a) available ISO Standards, such as the ISO 5598, provide some verbal definitions of properties, but do not provide sufficient detail of information required for an unambiguous data exchange;b) programs (i.e. software, eit

25、her commercially available or custom-made) used in different areas of a single company or amongst business partners (e.g. CAD-Systems, ERP-Systems, Office Tools) use different interfaces and different internal data representation (e.g. measurement unit, reference value); any attempt to exchange data

26、 between them requires multi-directional conversion mechanisms or is associated with a risk of introducing errors or simply is impossible.On the basis of standardized and electronically available properties, data exchange between, and immediate use of transmitted data in, the software used in variou

27、s departments or branches of one company or at various business partners can be implemented. Use of standardized properties increases process comprehensiveness at companies and permits closer IT-based links between customers and suppliers in the areas of development and supply. This, in turn, leads

28、to cost savings by way of cuts in the number of required parts and shorter product-development time frames.Though limited to the field of fluid power, the reference dictionary needs to include all relevant properties required for the full description of fluid power products and processes. Therefore,

29、 in addition to the properties that are peculiar to the field of fluid power systems, the reference dictionary also includes, be it by specification or be it by reference from other dictionaries, properties being of universal nature rather than specific to “fluid power systems”, e.g. quantities and

30、units or fundamental physical entities, and the required properties from other technical fields, e.g. mechanical components such as mountings for fluid power elements, if they are not defined elsewhere (i.e. in ISO 23584) and so cannot be referenced. ISO 2016 All rights reserved vBS ISO 18582-1:2016

31、ISO 18582-1:2016(E)In the interests of utmost effectiveness, the reference dictionary and its entire content should be made available in electronic form, ready for import into and use in a users application system.vi ISO 2016 All rights reservedBS ISO 18582-1:2016INTERNATIONAL STANDARD ISO 18582-1:2

32、016(E)Fluid power Specification of reference dictionary Part 1: General overview on organization and structure1 ScopeThis part of ISO 18582 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of fluid power, and for the provision of this r

33、eference dictionary and its entire contents in electronic form.This part of ISO 18582, based on ISO 13584-42 and ISO/IEC Guide 77-2, specifies a reference dictionary of standardized product properties for the area of fluid power.NOTE The properties are determined on the basis of standardized attribu

34、tes. To ensure optimum unambiguity, the standardized properties are classified into definition classes, forming a so-called standardized “reference hierarchy”.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

35、 application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 80000 (all parts), Quantities and unitsISO 13584-42, Industrial automation systems and integration Parts library Part 42: D

36、escription methodology: Methodology for structuring parts familiesISO/IEC Guide 77-2, Guide for specification of product properties and classes Part 2: Technical principles and guidance3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 13584-42 and ISO/I

37、EC Guide 77-2 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obpNOTE Some basic definitions and principles given in ISO

38、Guide 77-2 are provided in Annex A for information.4 Principles of specification4.1 Set of attributes for description of a propertyProperties shall be described by attributes as given in Table 1.NOTE The table contents are in accordance with the data model specified in ISO 13584-42, expanded where r

39、equired as per ISO/IEC Guide 77-2. ISO 2016 All rights reserved 1BS ISO 18582-1:2016ISO 18582-1:2016(E)Table 1 Set of attributes for description of a property (ISO/IEC Guide 77-2)Attribute Mandatory Translation possibleCode Y NVersion Y NDefinition class Y NRevision Y NDate of original definition Y

40、NDate of current version Y NDate of current revision Y NPreferred name Y YSynonymous name N YShort name N YDefinition Y YSource document of definition N YNote N YRemark N YPreferred symbol N NSynonymous symbol N NFigure N NProperty type classification N NDomain Y NFormula N NDepends on N NValue form

41、at N NUnit of measure Y/N NAlternative unit N N4.2 Set of attributes for description of a classClasses shall be described by attributes as given in Table 2.NOTE The table contents are in accordance with the data model specified in ISO 13584-42, expanded where required in accordance with ISO/IEC Guid

42、e 77-2.Table 2 Set of attributes for description of a class (ISO/IEC Guide 77-2)Attribute Mandatory Translation possibleCode Y NVersion Y NInformation supplier Y NRevision Y NDate of original definition Y NDate of current version Y NDate of current revision Y NPreferred name Y YSynonymous name N YSh

43、ort name N YDefinition Y Y2 ISO 2016 All rights reservedBS ISO 18582-1:2016ISO 18582-1:2016(E)Attribute Mandatory Translation possibleSource document of definition N YNote N YRemark N YSuperclass N NApplicable properties N NApplicable types N NFigure N NSubclass selectors N NClass selector values N

44、N4.3 Basic structure of reference dictionary4.3.1 GeneralFor an unambiguous specification, each property requires a defined context. In accordance with the data model, this context is provided by allocation of each property to an associated definition class.The definition class is one of the mandato

45、ry attributes of a property.When strictly applying the rules of the data model specified in ISO 13584-42, it is impossible to end up with object classes that describe objects in all detail. Therefore, a clear distinction shall be drawn between definition classes and application classes. The properti

46、es defined within the definition classes of the property dictionary can, i.e. in the sense of their defined context, be used in any application class.Within the hierarchic structure of definition classes and within the hierarchic structure of application classes, the rules of heredity, in accordance

47、 with the data model of ISO 13584-42, apply.4.3.2 Basic structure of the hierarchic order of the definition classesThe basic structure of the hierarchic order of definition classes of this part of ISO 18582 is adapted from the ICS (International Classification of Standards).To achieve compatibility

48、with the data model of ISO 13584-42, ICS classes are given a verbal definition and are related to each other by introduction of appropriate classifying properties. The ICS structure is modified to eliminate classes such as “miscellaneous”.On the top level order of the ICS, besides generalities/termi

49、nology/standardization (ICS 01), we have the sciences and the industry sectors. Properties shall always be allocated to the most general possible class (here, ICS class), that is, if a property cannot be allocated to ICS 01 and its subclasses, consideration shall be given to its allocation to the relevant science class, and only if this is not possible shall it be allocated to the relevant industry sector class.4.3.3 Allocation of properties for basic quantities within the hierarchic order of definition classesIn orde