BS ISO 18098-2013 Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation《建筑设备和工业装置用隔热产品 .pdf

《BS ISO 18098-2013 Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation《建筑设备和工业装置用隔热产品 .pdf》由会员分享，可在线阅读，更多相关《BS ISO 18098-2013 Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation《建筑设备和工业装置用隔热产品 .pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 18098:2013Thermal insulating productsfor building equipment andindustrial installations Determination of the apparentdensity of preformed pipeinsulationBS ISO 18098:2013 B

2、RITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 18098:2013.The UK participation in its preparation was entrusted to TechnicalCommittee B/540/8, Mirror committee for ISO/TC 163 - ThermalPerformance and Energy use in the built Environment.A list of organizations r

3、epresented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 5

4、80 79587 9ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate Text affectedBS ISO 18098:2013 ISO 201

5、3Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulationProduits isolants thermiques pour lquipement du btiment et les installations industrielles Dtermination de la masse volumique apparente des coquilles iso

6、lantes prformesINTERNATIONAL STANDARDISO18098First edition2013-04-15Reference numberISO 18098:2013(E)BS ISO 18098:2013ISO 18098:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or

7、 utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO cop

8、yright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 18098:2013ISO 18098:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms a

9、nd definitions . 14 Principle 15 Apparatus . 16 Test specimens 26.1 Dimensions of test specimens . 26.2 Number of test specimens . 26.3 Preparation of test specimens . 26.4 Conditioning of test specimens . 27 Procedure. 37.1 Test conditions 37.2 Test procedure . 38 Calculation and expression of resu

10、lts . 39 Accuracy of measurement 410 Test report . 4BS ISO 18098:2013ISO 18098:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out thr

11、ough ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collabo

12、rates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standar

13、ds. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of thi

14、s document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 18098 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 1, Test and measurement methods.ISO 1

15、8098 includes the original EN 13470 prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products. However, the following have been modified to reflect conditions for tropical countries: 6.4 “Conditioning of test specimens”; 7.1 “Test conditions”; and Clause 10 “Test repor t ”

16、.iv ISO 2013 All rights reservedBS ISO 18098:2013ISO 18098:2013(E)IntroductionThis International Standard is one of a series of existing European Standards on test methods for products used to insulate building equipment and industrial installations which comprises the following group of Internation

17、al Standards:ISO standard TitleRespective EN standardISO 12623 Thermal insulating products for building equipment and industrial installations Determination of short-term water absorption by partial immersion of preformed pipe insulationEN 13472ISO 12624 Thermal insulating products for building equi

18、pment and industrial installations Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pHEN 13468ISO 12628 Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed p

19、ipe insula-tionEN 13467ISO 12629 Thermal insulating products for building equipment and industrial installations Determination of water vapour transmission properties of preformed pipe insula-tionEN 13469ISO 18096 Thermal insulating products for building equipment and industrial installations Determ

20、ination of maximum service temperature for preformed pipe insulationEN 14707ISO 18097 Thermal insulating products for building equipment and industrial installations Determination of maximum service temperatureEN 14706ISO 18098 Thermal insulating products for building equipment and industrial instal

21、lations Determination of the apparent density of preformed pipe insulationEN 13470ISO 18099 Thermal insulating products for building equipment and industrial installations Determination of the coefficient of thermal expansionEN 13471 ISO 2013 All rights reserved vBS ISO 18098:2013ISO 18098:2013(E)A

22、further series of existing European Standards on test methods was adopted by ISO. This “package” of standards comprises the following group of interrelated standards:ISO standard TitleRespective EN standardISO 12344 Thermal insulating products for building applications Determination of bending behav

23、iourEN 12089ISO 12968 Thermal insulation products for building applications Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)EN 13495ISO 29465 Thermal insulating products for building applications Determination of length and widthEN 8

24、22ISO 29466 Thermal insulating products for building applications Determination of thick-nessEN 823ISO 29467 Thermal insulating products for building applications Determination of square-nessEN 824ISO 29468 Thermal insulating products for building applications Determination of flatness EN 825ISO 294

25、69 Thermal insulating products for building applications Determination of com-pression behaviourEN 826ISO 29470 Thermal insulating products for building applications Determination of the apparent densityEN 1602ISO 29471 Thermal insulating products for building applications Determination of dimen-sio

26、nal stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity)EN 1603ISO 29472 Thermal insulating products for building applications Determination of dimen-sional stability under specified temperature and humidity conditionsEN 1604ISO 29764 Thermal insulating product

27、s for building applications Determination of defor-mation under specified compressive load and temperature conditionsEN 1605ISO 29765 Thermal insulating products for building applications Determination of tensile strength perpendicular to facesEN 1607ISO 29766 Thermal insulating products for buildin

28、g applications Determination of tensile strength parallel to facesEN 1608ISO 29767 Thermal insulating products for building applications Determination of short-term water absorption by partial immersionEN 1609ISO 29768 Thermal insulating products for building applications Determination of linear dim

29、ensions of test specimensEN 12085ISO 29769 Thermal insulating products for building applications Determination of behav-iour under point loadEN 12430ISO 29770 Thermal insulating products for building applications Determination of thick-ness for floating-floor insulating productsEN 12431ISO 29771 The

30、rmal insulating materials for building applications Determination of organic contentEN 13820ISO 29803 Thermal insulation products for building applications Determination of the resistance to impact of external thermal insulation composite systems (ETICS)EN 13497vi ISO 2013 All rights reservedBS ISO

31、18098:2013ISO 18098:2013(E)The Application of Agreement on technical cooperation between ISO and CEN (Vienna Agreement), Modes 1, 2, 4, and 5, was not approved by CEN/TC 88 and the necessity not seen by its stakeholders.This International Standard is one of a series of standards which specify test m

32、ethods for determining dimensions and properties of thermal insulating materials and products. The original EN 13470 supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulati

33、ons, and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements.This International Standard has been prepared for products used to insulate building equipment and industrial installations, but it

34、 may also be applied to products used in other areas. ISO 2013 All rights reserved viiBS ISO 18098:2013BS ISO 18098:2013Thermal insulating products for building equipment and industrial installations Determination of the apparent density of preformed pipe insulation1 ScopeThis International Standard

35、 specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. It is applicable to full-size thermal insulating products and test specimens of preformed pipe insulation.2 Normative referencesThe following documents, in w

36、hole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 12628, Thermal insulating product

37、s for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insulation3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1apparent overall densityamass per unit volume of a product, i

38、ncluding all surface skins formed during production, but excluding any facings and/or coatings3.2apparent core densitycmass per unit volume of the core of a product after all surface skins formed during production and all facings and/or coatings have been removed4 PrincipleThe density is determined

39、as the quotient of the mass and the volume of the test specimen.5 Apparatus5.1 Balance, capable of determining the mass of a test specimen to an accuracy of 0,5 %.5.2 Equipment, for the determination of the dimensions of preformed pipe insulation (see 7.2).INTERNATIONAL STANDARD ISO 18098:2013(E) IS

40、O 2013 All rights reserved 1BS ISO 18098:2013ISO 18098:2013(E)6 Test specimens6.1 Dimensions of test specimensThe test specimens shall be full-size products or parts of them, or test specimens used for other tests.When the apparent overall density is being determined using test specimens cut from a

41、product with surface skins formed during production, the ratio of the area of the surface skin to the total volume shall be the same for the test specimen as for the product.The size of a test specimen should preferably be as large as possible, commensurate with the apparatus available and with the

42、shape of the original product. The size of the test specimens may also be specified in other test methods.6.2 Number of test specimensThe number of test specimens for full-size products shall be as specified in the relevant product standard. If test specimens from other tests are used, the number sh

43、all be as specified in the test method. If the number is not specified, then at least three test specimens shall be used.NOTE In the absence of a product standard or any other international technical specification, the number of test specimens may be agreed between parties.6.3 Preparation of test sp

44、ecimensThe test specimens shall be cut by methods that do not change the original structure of the product.The location from which the test specimens are taken shall be such that the density obtained is representative of the density of the product.For determining the apparent overall density, any fa

45、cings and/or coatings shall be removed from the product. For determining the apparent core density, any surface skins formed during production and any facings and/or coatings shall be removed from the product.When it is not possible to remove the facings and/or coatings without influencing the appar

46、ent density of the product, the mass of the facings and/or coatings shall be deducted by calculation.NOTE Special methods of preparation, when needed, are given in the relevant product standard.6.4 Conditioning of test specimensThe test specimens shall be conditioned at (23 2) C and (50 5) % relativ

47、e humidity (RH) until constant mass is achieved.The time for conditioning and the required accuracy of the constant mass measurements shall be given in the relevant product standard.NOTE 1 If it can be shown that temperature and humidity has negligible influence on the determination of the density,

48、then the conditioning can be carried out at (23 5) C.NOTE 2 The conditioning time can be shortened by pre-drying the test specimen in a ventilated drying chamber at a prescribed temperature. Appropriate procedures may be given in the relevant product standard.In tropical countries, different conditi

49、oning and testing conditions can be relevant. In this case, the conditions shall be (27 5) C and (65 5) % RH.2 ISO 2013 All rights reservedBS ISO 18098:2013ISO 18098:2013(E)7 Procedure7.1 Test conditionsThe test shall be carried out at (23 2) C and (50 5) % RH.NOTE If it can be shown that temperature and humidity has negligible influence on the determination of the density, the testing can be carried out at (23 5) C.In tropical countries, different conditioning and