BS ISO 14952-5-2004 Space systems - Surface cleanliness of fluid systems - Drying processes《航天系统 液体系统的表面清洁度 干燥过程》.pdf

《BS ISO 14952-5-2004 Space systems - Surface cleanliness of fluid systems - Drying processes《航天系统 液体系统的表面清洁度 干燥过程》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 14952-5-2004 Space systems - Surface cleanliness of fluid systems - Drying processes《航天系统 液体系统的表面清洁度 干燥过程》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS ISO 14952-5:2003 Space systems Surface cleanliness of fluid systems Part 5: Drying processes ICS 49.080; 49.140 BS ISO 14952-5:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 2 March 2004 BSI 2 March

2、2004 ISBN 0 580 43467 2 National foreword This British Standard reproduces verbatim ISO 14952-5:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/68, Space systems and operations, which has the responsibility to: A li

3、st of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspo

4、ndence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of

5、itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments a

6、nd promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since pub

7、lication Amd. No. Date Comments Reference number ISO 14952-5:2003(E) OSI 3002INTERNATIONAL STANDARD ISO 14952-5 First edition 2003-11-15 Space systems Surface cleanliness of fluid systems Part 5: Drying processes Systmes spatiaux Propret des surfaces en contact avec des fluides Partie 5: Procds de s

8、chage BSISO149525:2003IS-25941 O5:(3002E) DPlcsid Fremia ihTs PDF file mya ctnoian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromi

9、gn tide ehtin.g In wodlnidaot gnihs fil,e trapise atpecc tiereht nser ehnopsiiblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF f

10、ile cna f ebi dnuon tlareneG eh Ifnler oatit evt oeh file; tP ehDc-Frtaeino marapterew stpo ereimizde fro irptni.gn Evyre cera neeb sah takne tsne oeru taht teh file is siutlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Sect

11、erirata ta teh serddaig sleb nevwo. ISO 3002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mceinahcla, incliduntohp gcoiypodna gn micrfoilm, wittuoh repmissii now nritign from ietI rehSa Ot tsserd

12、da eh ebolw or ISOs memreb i ydobn the cnuotfo yr ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mial coirypthgis.o gro We bwww.is.o groii ISO 3002 Allr ihgtsser edevrBSISO149525:2003IS-25941 O5:(3002E) I SO 3002 All irhgts sere

13、devr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for w

14、hich a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all

15、 matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are c

16、irculated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. ISO 14952-5 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space systems and operations. ISO 14

17、952 consists of the following parts, under the general title Space systems Surface cleanliness of fluid systems: Part 1: Vocabulary Part 2: Cleanliness levels Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination Part 4: Rough-cleaning processes Pa

18、rt 5: Drying processes Part 6: Precision-cleaning processes BSISO149525:2003IS-25941 O5:(3002E) iv I SO 3002 All irhgts seredevrIntroduction This part of ISO 14952 describes a method for vacuum drying intricate parts or components that are likely to retain entrapped moisture when dried by normal pur

19、ging techniques. The purpose of this part of ISO 14952 is to provide processes that can be used to ensure the dryness of parts or components subjected to solvent- based or water-based cleaning processes. BSISO149525:2003INTENRATIONAL TSANDADR IS-25941 O5:(3002E)I SO 3002 All irhgts seredevr 1Space s

20、ystems Surface cleanliness of fluid systems Part 5: Drying processes 1 Scope This part of ISO 14952 provides guidance related to processes used to dry parts and components that have been subjected to solvent-based or water-based cleaning processes, and identifies drying processes that can be used fo

21、r equipment that has been cleaned for use in ground support equipment, launch vehicles and spacecraft. Vacuum drying can be used to remove entrapped fluids from intricate parts when normal purging methods have been found to be ineffective. 2 Normative references The following referenced documents ar

22、e indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14951-3:1999, Space systems Fluid characteristics Part 3: Nitrogen ISO 14952-1:200

23、3, Space systems Surface cleanliness of fluid systems Part 1: Vocabulary 3 Terms and definitions For the purposes of this part of this document, the terms and definitions given in ISO 14952-1 apply. 4 Drying and testing procedure Components shall be thoroughly dried to remove residual cleaning, rins

24、ing and/or verification media. Effluent gas shall not exhibit an increase in moisture content greater than 5 l/l or a measurable increase in concentration of residual organic solvents. Items that do not lend themselves to this type of drying or testing procedure (i.e. special surface treatments or c

25、oatings) shall be dried in accordance with procedures agreed upon between the cleaning contractor and the customer. 5 Vacuum drying procedure 5.1 Apparatus and reagents The following items are required to accomplish the vacuum drying processes specified by this part of ISO 14952. 5.1.1 Vacuum oven,

26、with temperature control range from 45 C to 125 C. BSISO149525:2003IS-25941 O5:(3002E) 2 I SO 3002 All irhgts seredevr5.1.2 Purge (test) gas, nitrogen in accordance with ISO 14951-3, Type A. 5.1.3 Thermocouple, for independent temperature monitoring of parts. 5.2 Heating of parts Component parts sha

27、ll be placed in the vacuum oven with the thermocouple attached to the largest part placed in the oven. The oven shall be closed and purged with inert test gas, then the oven shall be heated to the desired vacuum drying temperature. The temperature of the parts shall be governed by the following crit

28、eria: a) minimum drying temperature for all parts shall be 45 C; b) maximum drying temperature for parts containing nonmetallics shall be 65 C; c) maximum temperature for drying metallic parts shall be 125 C. 5.3 Thermal vacuum drying time Once the thermocouple monitor indicates that the parts have

29、reached the desired temperature, a vacuum should be drawn on the parts and maintained for the period specified in Table 1. Once the parts have been dehydrated, the heat should be discontinued and the oven slowly back-filled with the test gas. Table 1 Vacuum drying time Values in hours Temperature Va

30、cuum oven pressure kPa 45 C 5 C 6 C 7 C 8 C 20,0 0,9 0,75 15,0 1,3 0,8 0,75 13,0 4,8 1,2 0,75 0,75 9,5 2,0 0,8 0,75 0,75 6,5 3,4 1,1 0,75 0,75 0,75 3,0 0,9 0,75 0,75 0,75 0,75 2,0 0,75 0,75 0,75 0,75 0,75 6 Gaseous purge-drying procedure 6.1 Materials Gases used in purge-drying processes shall confo

31、rm to the following requirements. a) Nitrogen, filtered to remove particulates greater than 5 m, shall be in accordance with Type A of ISO 14951-3:1999. b) Air shall contain no particulate matter greater than 5 m. The hydrocarbon content shall not exceed 10 l/l except that a total value of 20 l/l is

32、 acceptable when the portion of the total hydrocarbon content representing compounds containing 5 or more carbon atoms does not exceed 5 l/l. The relative humidity shall not exceed 60 %. BSISO149525:2003IS-25941 O5:(3002E) I SO 3002 All irhgts seredevr 36.2 Drying sample 6.2.1 Reliability sample The

33、 quantitative analysis reliability sample shall consist of a minimum of 5 % of the items dried but not less than one sample from each group of items dried. The sample shall be selected in a manner that will provide maximum representation of the lot containing production items that have been cleaned,

34、 verified and dried. A lot does not necessarily mean identical parts but does include all hardware processed in one operation. The reliability sample and the segment of production that it represents shall be clearly identified, as specified by the customer. 6.2.2 Procedure reliability Alternatively,

35、 the reliability of the drying procedure may be established for each hardware configuration and drying process. After qualification of the procedure and equipment for a specific hardware configuration, reliability sampling shall be left to the discretion of the customer. Samples for qualification of

36、 the drying process shall be selected as follows. a) Select a minimum of five cleaned, verified and dried items from each of the hardware configuration to be qualified. b) Evaluate samples in accordance with 6.3. c) Upon qualification of the drying procedure for each hardware configuration, the esta

37、blished drying cycle requirements shall be implemented. Periodic spot tests shall be made to ensure that drying procedures continue to be effective. 6.3 Drying test Unless otherwise approved by the customer, the reliability of the drying procedure for items subjected to liquids during cleaning or dr

38、ying procedures shall be determined as follows. a) Prefiltered drying gas shall be flowed through or over the affected surfaces of the item being tested. b) For hardware processed with aqueous media, the dewpoint of the drying gas entering and leaving the affected item shall be monitored to determin

39、e the presence of moisture on cleaned and dried surfaces. An increase in the moisture content of the drying gas of 5 l/l or greater shall necessitate additional drying prior to packaging or the application of protective coverings. c) For hardware processed with halogenated solvents, the effluent dry

40、ing gas shall be monitored with a halogen detector to determine if affected surfaces are free from residual solvent. If no measurable concentrations are indicated by the halogen detector, the affected surfaces shall be considered free from residual halogenated solvents. Any measurable concentration

41、above ambient in the drying gas shall necessitate additional drying prior to packaging or application of protective coverings. For hardware processed with alcohols or other hydrocarbons, the effluent drying gas shall be monitored with a hydrocarbon detector. Any measurable concentration above ambien

42、t in the drying gas shall necessitate additional drying prior to packaging or application of protective coverings. BSISO149525:2003BS ISO 14952-5:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Sta

43、ndards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the con

44、stant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. T

45、el: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addr

46、essed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publish

47、ed as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available whi

48、ch give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For

49、details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website