BS ISO 14813-5-2010 Intelligent transport systems Reference model architecture(s) for the ITS sector Requirements for architecture description in ITS standards《智能运输系统(ITS) 智能运输系统信息.pdf

《BS ISO 14813-5-2010 Intelligent transport systems Reference model architecture(s) for the ITS sector Requirements for architecture description in ITS standards《智能运输系统(ITS) 智能运输系统信息.pdf》由会员分享，可在线阅读，更多相关《BS ISO 14813-5-2010 Intelligent transport systems Reference model architecture(s) for the ITS sector Requirements for architecture description in ITS standards《智能运输系统(ITS) 智能运输系统信息.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 14813-5:2010Intelligent transport systems Reference model architecture(s)for the ITS sectorPart 5: Requirements for architecturedescription in ITS standardsBS ISO 14813-5:

2、2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 14813-5:2010.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/278, Road transport informatics.A list of organizations represented on this committee can beobtained on request to

3、its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 58668 2ICS 03.220.01; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British S

4、tandard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010.Amendments issued since publicationDate Text affectedBS ISO 14813-5:2010Reference numberISO 14813-5:2010(E)ISO 2010INTERNATIONAL STANDARD ISO14813-5First edition2010-07-01Intelligent transpor

5、t systems Reference model architecture(s) for the ITS sector Part 5: Requirements for architecture descriptionin ITS standards Systmes intelligents de transport (ITS) Architecture(s) de modle de rfrence pour le secteur ITS Partie 5: Exigences pour la description darchitecture dans les normes ITS BS

6、ISO 14813-5:2010ISO 14813-5:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the

7、 editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file ca

8、n be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretaria

9、t at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing fr

10、om either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reservedBS ISO 14813-5:2

11、010ISO 14813-5:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Conformance .1 3 Normative references1 4 Terms and definitions .2 5 Requirements.2 5.1 General requirements .2 5.1.1 Architecture description.2 5.1.2 Service description .2 5.1.3 Architecture d

12、escription elements 2 5.2 Further guidance .3 5.3 ITS architecture elements.3 5.3.1 General requirements .3 5.3.2 Conceptual architecture .4 5.3.3 Logical architecture 5 5.3.4 Physical architecture (optional).5 5.3.5 Communications architecture (optional) 5 5.3.6 Organisational architecture (optiona

13、l) 5 5.4 Object-oriented architecture 5 5.4.1 General .5 5.4.2 Specific requirements for object-oriented description .6 5.4.3 Relationship to ITS service domains, service groups and services6 5.4.4 Control behaviour6 5.4.5 Multiple viewpoints .6 5.5 Process-oriented architecture .6 5.5.1 General .6

14、5.5.2 Specific requirements for process-oriented methodology description 6 5.6 Application architecture/deployment (implementation) design .8 5.7 Layout of architecture description in ITS standards and other deliverables8 5.7.1 Description method.8 5.7.2 Usage of terms.8 5.7.3 Plain language .9 5.7.

15、4 Deployment design .9 5.7.5 Use of annexes 9 5.7.6 Relationships with other standards 9 Annex A (informative) Standards for specific architecture methodologies .10 Annex B (normative) Glossary of ITS architecture terms, abbreviated terms and numeric notation11 Bibliography30 BS ISO 14813-5:2010ISO

16、14813-5:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each me

17、mber body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International E

18、lectrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards ad

19、opted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of pa

20、tent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14813-5 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems. This first edition of ISO 14813-5 cancels and replaces ISO/TR 14813-5:1999, of which it constitutes a technical rev

21、ision. ISO 14813 consists of the following parts, under the general title Intelligent transport systems Reference model architecture(s) for the ITS sector : Part 1: ITS service domains, service groups and services Part 2: Core TICS reference architecture Technical Report Part 3: Example elaboration

22、Technical Report Part 4: Reference model tutorial Technical Report Part 5: Requirements for architecture description in ITS standards Part 6: Data presentation in ASN.1 BS ISO 14813-5:2010ISO 14813-5:2010(E) ISO 2010 All rights reserved vIntroduction “Architecture” can be defined as “Design; the way

23、 components fit together ”1). Architecture is implicit in any construction, be it of a physical entity (such as a building), an operational entity (such as a company or organisation), a system entity (such as a software system) or a business entity (such as a commercial business operation). While it

24、 may be stated that every entity has an architecture, the particular architecture may be an explicit construction as a result of a deliberate design process or the implicit result of an unplanned series of events, or sometimes the combination of both. In physical construction, it is generally recogn

25、ised that a deliberate design process will produce a better and more efficient building that one where a group of individuals have collected whatever materials happened to be nearby in order to create a shelter. Intelligent transport systems (ITS) are systems deployed in transportation environments

26、to improve both the driving experience and the safety and security of drivers, passengers and pedestrians. ITS can also assist in the labour, energy, environmental and cost efficiency of transportation systems. It is a feature of most ITS that their architecture involves the collection, use and exch

27、ange of information/data within and between software systems which affect or control the behaviour of physical equipment, providing a service to the actors involved in, or interacting with, the transport sector. In order to maximise the efficiency of co-existing ITS, to obtain compatibility and/or i

28、nteroperability and to eliminate contention, the systems need to co-exist and operate within a known and supportive architectural framework. The ITS sector is still emerging and developing and is still close to the start of its evolution and application. The technology is developing and changing rap

29、idly and ITS services have generally to make provision not only for its interaction with other services, but with migration from one technology generation to later iterations. This part of ISO 14813 is designed to ensure that, in order to obtain maximum interoperability, efficiency and migration cap

30、ability, architecture is an explicit process in the development of, and specifications defined within, ITS standards. “Architecture” is used in an informal manner to mean a variety of different concepts and, in formal architecture design, there are differing methodologies and opinions as to their su

31、itability for use in ITS system and standards design. This has limited effective communication in the ITS sector by causing uncertainty as to the meaning of the word when it is used in one context or another. A second function of this part of ISO 14813 is to provide consistent terminology to be used

32、 in describing architectural aspects of ITS standards and provide a consistent form for ITS architecture description in standards in the ITS sector. An ITS architecture is a framework for ITS deployments. It is a high-level description of the major elements and the interconnections among them. It pr

33、ovides the framework around which the interfaces, specifications and detailed ITS designs can be defined. An ITS architecture is not a product design or a detailed specification for physical deployment and is not specific to any one location. “Systems architecture” is perhaps the closest general ter

34、m, but this is sometimes too specific to include the conceptual aspects included in the term “ITS Architecture” and often also implies a location-specific solution. The purpose of an ITS architecture is to maximise efficiency, interoperability and multimodality of multiple interacting ITS in a compl

35、ex and developing sector. 1) Interoperability Clearinghouse Glossary of Terms, http:/www.ichnet.org/glossary.htm) BS ISO 14813-5:2010ISO 14813-5:2010(E) vi ISO 2010 All rights reservedThis part of ISO 14813 does not give preference to any one methodology for architecture development and description.

36、 It requires only that the consideration of architecture be an explicit process that takes into account the interrelationships and interoperability of ITS, and that an architecture description be provided within ITS standards. This part of ISO 14813 requires that the architecture aspects of ITS stan

37、dards be described explicitly in each and every ITS standard, and that all such standards be related to the (one or more) ITS service domains, service groups and services set out in ISO 14813-1 that they are designed to enable or support. BS ISO 14813-5:2010INTERNATIONAL STANDARD ISO 14813-5:2010(E)

38、 ISO 2010 All rights reserved 1Intelligent transport systems Reference model architecture(s) for the ITS sector Part 5: Requirements for architecture description in ITS standards 1 Scope This part of ISO 14813 gives requirements for the description and documentation of the architecture of intelligen

39、t transport systems (ITS) in standards dealing with ITS. It also defines the terms to be used when documenting or referencing aspects of architecture description in those standards (see Annex B). Although the use of contemporary systems engineering practices is assumed by this part of ISO 14813, it

40、does not define such practices. NOTE Guidance on the use of the unified modelling language (UML) in ITS architectures can be found in ISO/TR 17452 and ISO/TR 24529. Guidance on the use of the process-orientated methodology in ITS architectures can be found in ISO/TR 26999. 2 Conformance There are no

41、 specific conformance tests specified within or associated with this part of ISO 14183. Developers of standards claiming conformance with this part of ISO 14183 are, however, required to describe the architecture of their system in their deliverables, or to make reference to other standards or publi

42、cly available documents that provide such description. The level of detail or the methodology used for such description is not specified and is left to the discretion of the standards developers. Implementers of ITS cannot, of course, be required to make such provision, but are advised to do so in t

43、heir plans and tender documents. This part of ISO 14813 is therefore also designed as a consistent reference for ITS system designers. 3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applie

44、s. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 8824 (all parts), Information technology Abstract Syntax Notation One (ASN.1)2)ISO/IEC 8825 (all parts), Information technology ASN.1 encoding rules2)2) ASN.1 standards are divided in

45、to the abstract syntax notation one (ASN.1) specifications and the ASN.1 encoding rules. ISO/IEC 8824-1 to ISO/IEC 8824-4 and ISO/IEC 8825-1 to ISO/IEC 8825-4 correspond to ITU-T Recommendations X.680, X.681, X.682 and X.683, and X.690, X.691, X.692 and X.693, respectively. See http:/www.itu.int/ITU

46、-T/studygroups/com17/languages/. BS ISO 14813-5:2010ISO 14813-5:2010(E) 2 ISO 2010 All rights reservedISO/IEC 9834-1, Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities: General procedures and top arcs of the International Object Identifi

47、er tree Part 1 ISO 14813-1, Intelligent transport systems Reference model architecture(s) for the ITS sector Part 1: ITS service domains, service groups and services ISO/TR 14813-6, Intelligent transport systems Reference model architecture(s) for the ITS sector Part 6: Data presentation in ASN.1 IS

48、O/IEC 19501:2005, Information technology Open Distributed Processing Unified Modeling Language (UML) Version 1.4.2 4 Terms and definitions For the purposes of this document, the terms and definitions given in Annex B and the following apply. 4.1 ITS architecture non-specific system design for a fami

49、ly of functionally different intelligent transport systems (ITS), interconnected to operate in consort and harmony NOTE 1 An ITS architecture can be described from different viewpoints, and from multiple viewpoints by conceptual, logical and/or physical representations. NOTE 2 An ITS architecture is not specific to any single location. 5 Requirements 5.1 General requirements 5.1.1 Architecture description All ITS standards shall provide an architecture description, by inclusion in the standard