BS ISO 12197-2016 Woodruff keyseat cutters Dimensions《半圆键槽铣刀 尺寸》.pdf

《BS ISO 12197-2016 Woodruff keyseat cutters Dimensions《半圆键槽铣刀 尺寸》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 12197-2016 Woodruff keyseat cutters Dimensions《半圆键槽铣刀 尺寸》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 12197:2016Woodruff keyseat cutters DimensionsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 12197:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 12197:2016. It supersedes BS ISO 12197:1996 which is withdrawn

2、.The UK participation in its preparation was entrusted to Technical Committee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provi

3、sions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83640 4 ICS 25.100.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publis

4、hed under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 12197:2016 ISO 2016Woodruff keyseat cutters DimensionsFraises pour logement de clavettes-disques DimensionsINTERNATIONAL STANDAR

5、DISO12197Second edition2016-11-01Reference numberISO 12197:2016(E)BS ISO 12197:2016ISO 12197:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized

6、 otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright of

7、ficeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 12197:2016ISO 12197:2016(E)Foreword iv1 Scope . 12 Normative references 13 Dimensions . 1Annex A (informative) Relationship between designations in this Intern

8、ational Standard and ISO 13399 (all parts) 3Bibliography 4 ISO 2016 All rights reserved iiiContents PageBS ISO 12197:2016ISO 12197:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing

9、 International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liais

10、on with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Direc

11、tives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that som

12、e of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declara

13、tions received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information abou

14、t ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 2, Holding tools, adaptive items and interfaces.This

15、second edition cancels and replaces the first edition (ISO 12197:1996), of which it constitutes a minor revision, notably with the addition of Annex A, which gives the relationship between the designations of this International Standard and the ISO 13399 series.iv ISO 2016 All rights reservedBS ISO

16、12197:2016INTERNATIONAL STANDARD ISO 12197:2016(E)Woodruff keyseat cutters Dimensions1 ScopeThis International Standard specifies the dimensions of milling cutters intended for manufacturing woodruff keyseats in accordance with ISO 3912.Two types of woodruff keyseat cutters with cylindrical shank ar

17、e specified: woodruff keyseat cutters with cylindrical shank, in accordance with ISO 3338-1; woodruff keyseat cutters with flatted cylindrical shank, in accordance with ISO 3338-2.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are

18、indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3338-1, Cylindrical shanks for milling cutters Part 1: Dimensional characteristics of plain cylindrica

19、l shanksISO 3338-2, Cylindrical shanks for milling cutters Part 2: Dimensional characteristics of flatted cylindrical shanksISO 3912, Woodruff keys and keyways3 DimensionsSee Figure 1 and Table 1.Key1 plain parallel shank (ISO 3338-1)2 flatted parallel shank (ISO 3338-2)Figure 1 ISO 2016 All rights

20、reserved 1BS ISO 12197:2016ISO 12197:2016(E)Table 1Dimensions in millimetresd1b d2d3l Keynom. tol. e8 ISO 39124+0,5+0,4161,8501 1,471,5 2,8 1,5 2,62 3,2 2 2,6102 4 2 3,72,5 2,5 3,713 3104,6563 5163 4,6 3 6,54 4 6,55 5 5 6,519+0,5+0,34 5,6634 7,55 6 5 7,5225 6 5 96 6,5 6 925 6 7, 5 6 1028 8 8,5 8 113

21、2 10 12 9,3 71 10 13aCutters may be provided with radius. In that case, the value of the radius shall be such that cutters are able to manufacture keyways in accordance with ISO 3912.2 ISO 2016 All rights reservedBS ISO 12197:2016ISO 12197:2016(E)Annex A (informative) Relationship between designatio

22、ns in this International Standard and ISO 13399 (all parts)For relationship between designations in this International Standard and preferred symbols according to ISO 13399 (all parts), see Table A.1.Table A.1 Relationship between designations in this International Standard and ISO 13399 (all parts)

23、Symbol in ISO 12197Reference in ISO 12197Property name in ISO 13399 (all parts)Symbol in ISO 13399 (all parts)Reference in ISO 13399 (all parts)d1Figure 1 Table 1cutting diameter DC 71D084653E57Fd2Figure 1 Table 1connection diameter machine sideDCONMS 71EBDBF5060E6d3Figure 1 Table 1neck diameter DN

24、71EAC48EC5DE0bFigure 1 Table 1depth of cut maximum APMX 71D07576C0558lFigure 1 Table 1overall length OAL 71D078EB7C086 ISO 2016 All rights reserved 3BS ISO 12197:2016ISO 12197:2016(E)Bibliography1 ISO 13399 (all parts), Cutting tool data representation and exchange4 ISO 2016 All rights reservedBS IS

25、O 12197:2016BS ISO 12197:2016ISO 12197:2016(E) ISO 2016 All rights reservedICS 25.100.20Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated b

26、y Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -

27、based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide yo

28、u with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted Europe

29、an and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in

30、BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save f

31、or the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and us

32、ing standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only

33、 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to

34、create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce conte

35、nt from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,00

36、0 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subsc

37、ription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of

38、membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further informatio

39、n, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the

40、Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20