BS ISO 10303-32-1998 Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework Requirements on testin.pdf

《BS ISO 10303-32-1998 Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework Requirements on testin.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10303-32-1998 Industrial automation systems and integration - Product data representation and exchange - Conformance testing methodology and framework Requirements on testin.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10303-32:1998 Industrial automation systems and integration Product data representation and exchange Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients ICS35.240.50BSISO10303-32:1998 This British Standard, having been prep

2、ared under the directionof the DISC Board, waspublished under the authorityof the Standards Committee and comes into effecton 15December1998 BSI05-1999 ISBN 0 580 32012 X National foreword This British Standard reproduces verbatim ISO10303-32:1998 and implements it as the UK national standard. The U

3、K participation in its preparation was entrusted to Technical Committee AMT/4, Product data exchange, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and k

4、eep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European pu

5、blications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary p

6、rovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO title

7、 page, pagesii toviii, pages1 to14, an inside back cover and aback cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsB

8、SISO10303-32:1998 BSI 05-1999 i Contents Page National foreword Inside front cover Foreword iv Text of ISO10303-32 1ii blankBSISO10303-32:1998 ii BSI 05-1999 Contents Page Foreword iv Introduction 1 1 Scope 1 1.1 Coverage 1 1.2 Applicability 2 2 Normative references 2 3 Definitions 2 3.1 Terms defin

9、ed in ISO10303-1 2 3.2 Terms defined in ISO10303-31 2 3.3 Other definitions 3 3.3.1 means of testing 3 3.4 Abbreviations 3 4 Fundamental assumptions 3 5 Preparation for testing 4 5.1 Introduction 4 5.2 Production of administrative information 4 5.2.1 Testing laboratory role 4 5.2.2 Client role 4 5.3

10、 Completion of the PICS 4 5.3.1 Testing laboratory role 4 5.3.2 Client role 4 5.4 PICS review 5 5.4.1 Testing laboratory role 5 5.4.2 Client role 5 5.4.3 Mutual role 5 5.5 Informal testing and completion of the PIXIT 5 5.5.1 Content of the PIXIT 5 5.5.2 Testing laboratory role 5 5.5.3 Client role 5

11、5.6 PIXIT review 5 5.6.1 Testing laboratory role 5 5.6.2 Client role 6 5.6.3 Mutual role 6 5.7 Final abstract test case selection and assignment of parameter values 6 5.7.1 Testing laboratory role 6 5.7.2 Client role 6 5.7.3 Mutual role 6 6 Test campaign 7 6.1 Introduction 7 6.2 Testing laboratory r

12、ole 7 6.3 Client role 7 6.4 Mutual role 7 7 Analysis of results 7 7.1 Testing laboratory role 7 7.2 Client role 7 7.3 Mutual role 7 8 Conformance test report production 7 8.1 Testing laboratory role 7 8.2 Client role 7BSISO10303-32:1998 BSI 05-1999 iii Page 8.3 Mutual role 8 9 Compliance 8 9.1 Testi

13、ng laboratory role 8 9.2 Client role 8 Annex A (normative) Information object registration 9 Annex B (normative) Conformance test report proforma 9 Annex C (informative) Guidance for a PIXIT 10 Annex D (informative) Certification 10 Annex E (informative) Example proforma conformance test report 10 I

14、ndex Inside back cover Descriptors: Automation, automation engineering, computer applications, industrial products, data, data exchange, data representation, tests, conformity tests, testing laboratories.BSISO10303-32:1998 iv BSI 05-1999 Foreword ISO (the International Organization for Standardizati

15、on) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be re

16、presented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Stan

17、dards adopted by technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. International Standard10303-32 was prepared by Technical Committee ISO/TC184, Industrial automation sys

18、tems and integration, Subcommittee4, Industrial data. ISO10303 consists of the following parts under the general title Industrial automation systems and integration Product data representation and exchange: Part1: Overview and fundamental principles; Part11: Description methods: The EXPRESS language

19、 reference manual; Part12: Description methods: The EXPRESS-I language reference manual; Part21: Implementation methods: Clear text encoding of the exchange structure; Part22: Implementation methods: Standard data access interface specification; Part23: Implementation methods: C+ language binding to

20、 the standard data access interface; Part24: Implementation methods: C language binding to the standard data access interface; Part26: Implementation methods: Interface definition language binding to the standard data access interface; Part31: Conformance testing methodology and framework: General c

21、oncepts; Part32: Conformance testing methodology and framework: Requirements on testing laboratories and clients; Part34: Conformance testing methodology and framework: Abstract test methods; Part35: Conformance testing methodology and framework: Abstract test methods for SDAI implementations; Part4

22、1: Integrated generic resources: Fundamentals of product description and support; Part42: Integrated generic resources: Geometric and topological representation; Part43: Integrated generic resources: Representation structures; Part44: Integrated generic resources: Product structure configuration; Pa

23、rt45: Integrated generic resource: Materials; Part46: Integrated generic resources: Visual presentation; Part47: Integrated generic resource: Shape variation tolerances; Part49: Integrated generic resource: Process structure and properties; Part101: Integrated application resource: Draughting; Part1

24、04: Integrated application resource: Finite element analysis; Part105: Integrated application resource: Kinematics; Part106: Integrated application resource: Building construction core model;BSISO10303-32:1998 BSI 05-1999 v Part201: Application protocol: Explicit draughting; Part202: Application pro

25、tocol: Associative draughting; Part203: Application protocol: Configuration controlled design; Part204: Application protocol: Mechanical design using boundary representation; Part205: Application protocol: Mechanical design using surface representation; Part207: Application protocol: Sheet metal die

26、 planning and design; Part208: Application protocol: Life cycle management Change process; Part209: Application protocol: Composite and metallic structural analysis and related design; Part210: Application protocol: Electronic assembly, interconnect, and packaging design; Part212: Application protoc

27、ol: Electrotechnical design and installation; Part213: Application protocol: Numerical Control process plans for machined parts; Part214: Application protocol: Core data for automotive mechanical design; Part215: Application protocol: Ship arrangement; Part216: Application protocol: Ship moulded for

28、ms; Part217: Application protocol: Ship piping; Part218: Application protocol: Ship structures; Part221: Application protocol: Functional data and their schematic representation for process plant; Part222: Application protocol: Exchange of product data for composite structures; Part223: Application

29、protocol: Exchange of design and manufacturing product information for casting parts; Part224: Application protocol: Mechanical products definition for process plans using machining features; Part225: Application protocol: Building elements using explicit shape representation; Part226: Application p

30、rotocol: Ship mechanical systems; Part227: Application protocol: Plant spatial configuration; Part229: Application protocol: Exchange of design and manufacturing product information for forged parts; Part230: Application protocol: Building structural frame: Steelwork; Part231: Application protocol:

31、Process engineering data: Process design and process specification of major equipment; Part232: Application protocol: Technical data packaging core information and exchange; Part301: Abstract test suite: Explicit draughting; Part302: Abstract test suite: Associative draughting; Part303: Abstract tes

32、t suite: Configuration controlled design; Part304: Abstract test suite: Mechanical design using boundary representation; Part305: Abstract test suite: Mechanical design using surface representation; Part307: Abstract test suite: Sheet metal die planning and design;BSISO10303-32:1998 vi BSI 05-1999 P

33、art308: Abstract test suite: Life cycle management Change process; Part309: Abstract test suite: Composite and metallic structural analysis and related design; Part310: Abstract test suite: Electronic assembly, interconnect, and packaging design; Part312: Abstract test suite: Electrotechnical design

34、 and installation; Part313: Abstract test suite: Numerical control process plans for machined parts; Part314: Abstract test suite: Core data for automotive mechanical design; Part315: Abstract test suite: Ship arrangement; Part316: Abstract test suite: Ship moulded forms; Part317: Abstract test suit

35、e: Ship piping; Part318: Abstract test suite: Ship structures; Part321: Abstract test suite: Functional data and their schematic representation for process plant; Part322: Abstract test suite: Exchange of product data for composite structures; Part323: Abstract test suite: Exchange of design and man

36、ufacturing product information for casting parts; Part324: Abstract test suite: Mechanical product definition for process plans using machining features; Part325: Abstract test suite: Building elements using explicit shape representation; Part326: Abstract test suite: Ship mechanical systems; Part32

37、7: Abstract test suite: Plant spatial configuration; Part329: Abstract test suite: Exchange of design and manufacturing product information for forged parts; Part330: Abstract test suite: Building structural frame: Steelwork; Part331: Abstract test suite: Process engineering data: Process design and

38、 process specification of major equipment; Part332: Abstract test suite: Technical data packaging core information and exchange; Part501: Application interpreted construct: Edge-based wireframe; Part502: Application interpreted construct: Shell-based wireframe; Part503: Application interpreted const

39、ruct: Geometrically bounded2D wireframe; Part504: Application interpreted construct: Draughting annotation; Part505: Application interpreted construct: Drawing structure and administration; Part506: Application interpreted construct: Draughting elements; Part507: Application interpreted construct: G

40、eometrically bounded surface; Part508: Application interpreted construct: Non-manifold surface; Part509: Application interpreted construct: Manifold surface; Part510: Application interpreted construct: Geometrically bounded wireframe; Part511: Application interpreted construct: Topologically bounded

41、 surface; Part512: Application interpreted construct: Faceted boundary representation; Part513: Application interpreted construct: Elementary boundary representation;BSISO10303-32:1998 BSI 05-1999 vii Part514: Application interpreted construct: Advanced boundary representation; Part515: Application

42、interpreted construct: Constructive solid geometry; Part517: Application interpreted construct: Mechanical design geometric presentation; Part518:Application interpreted construct: Mechanical design shaded presentation. The structure of this International Standard is described in ISO10303-1. Thenumb

43、ering of the parts of this International Standard reflects its structure: Parts11 and12: specify the description methods; Parts21 to26: specify the implementation methods; Parts31 to35: specify the conformance testing methodology and framework; Parts41 to49: specify the integrated generic resources;

44、 Parts101 to106: specify the integrated application resources; Parts201 to232: specify the application protocols; Parts301 to332: specify the abstract test suites, and; Parts501 to518: specify the application interpreted constructs. Should further parts be published, they will follow the same number

45、ing pattern. Annex A and Annex B form an integral part of this part of ISO10303. Annex C, Annex D and Annex E are for information only.viii blankBSISO10303-32:1998 BSI 05-1999 1 Introduction ISO10303 is an International Standard for the computer-interpretable representation and exchange of product d

46、ata. The objective is to provide a neutral mechanism capable of describing product data throughout the life cycle of a product, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing and sharin

47、g product databases and archiving. This International Standard is organized as a series of parts, each published separately. The parts of ISO10303 fall into one of the following series: description methods, integrated resources, application interpreted constructs, application protocols, abstract tes

48、t suites, implementation methods, and conformance testing. The series are described in ISO10303-1. This part of ISO10303 is a member of the conformance testing series. This part of ISO10303 specifies the techniques and means to facilitate the use of those techniques by the testing laboratory and the

49、 client for conformance testing. This part of ISO10303 addresses the roles of both the testing laboratory and the client during the conformance assessment process, the need to reach mutual agreements between them, and the requirements on each of them. A major objective of standardising the conformance assessment process is to achieve an acceptable and usefu