BS HC 502-1981 Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9 5 Ni 5 Fe 5)《铜基铝-镍-铁合金铸件规范(620MPa)(铝9 5、镍5、铁5)》.pdf

《BS HC 502-1981 Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9 5 Ni 5 Fe 5)《铜基铝-镍-铁合金铸件规范(620MPa)(铝9 5、镍5、铁5)》.pdf》由会员分享，可在线阅读，更多相关《BS HC 502-1981 Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9 5 Ni 5 Fe 5)《铜基铝-镍-铁合金铸件规范(620MPa)(铝9 5、镍5、铁5)》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS HC 502:1981 (Superseding BS HC 501) Specification for Copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) UDC 629.7:669.3571241 14BS HC502:1981 This British Standard, having been prepared under the directionof the Aerospace Standards C

2、ommittee, was published under the authority ofthe Executive Board and comesinto effect on 30 September 1981 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/60 Draft for comment 80/79049 DC ISBN 0 580 12327 8 A British Standard does not purport to

3、 include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover,

4、pagesi andii, page1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date of issue CommentsBSHC502:1981 BSI 01-2000 i C

5、ontents Page 1 Inspection and testing procedure 1 2 Chemical composition 1 3 Condition 1 4 Mechanical properties 1ii blankBSHC502:1981 BSI 01-2000 1 1 Inspection and testing procedure This British Standard shall be used in conjunction with the relevant sections of the latest issue of BSHC 100 as fol

6、lows: 2 Chemical composition The re-melting stock and the castings shall contain: 3 Condition Castings shall be supplied as cast. 4 Mechanical properties 4.1 Tensile. The tensile properties obtained from test pieces representing castings, selected, prepared and tested in accordance with the relevant

7、 requirements of BSHC 100, shall be not less than the following values: Re-melting stock sections 1 and 2 Precision castings sections 1 and 3 Sand castings sections 1 and 4 Centrifugal castings sections 1 and 5 Element % min. max. Silicon 0.10 Manganese 1.5 Aluminium 8.8 10.0 Iron 4.0 5.5 Magnesium

8、0.05 Nickel 4.0 5.5 Lead 0.01 Tin 0.1 Zinc 0.50 Copper Remainder 0,2% proof stress Tensile strength Elongation MPa MPa % 250 620 10BSHC 502:1981 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It

9、 presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of

10、 BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:0208996900

11、0. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel

12、:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Europe

13、an and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of

14、 BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds

15、 the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording

16、or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.