BS EN ISO 16890-4-2016 Air filters for general ventilation Conditioning method to determine the minimum fractional test efficiency《全面通风用空气过滤器 采用调节法测定最小分级试验效率》.pdf

《BS EN ISO 16890-4-2016 Air filters for general ventilation Conditioning method to determine the minimum fractional test efficiency《全面通风用空气过滤器 采用调节法测定最小分级试验效率》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 16890-4-2016 Air filters for general ventilation Conditioning method to determine the minimum fractional test efficiency《全面通风用空气过滤器 采用调节法测定最小分级试验效率》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 16890-4:2016Air filters for generalventilationPart 4: Conditioning method to determinethe minimum fractional test efficiency (ISO16890-4:2016)BS EN ISO 16890-4:2016Incorporating corrigendum March 2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO

2、 16890-4:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16890-4:2016. Together with BS EN ISO 16890-1:2016, BS EN ISO 16890-2:2016 and BS EN ISO 16890-3:2016 it supersedes DD ISO/TS 21220:2009 which is withdrawn and BS EN 779:2012 which will be withdra

3、wn on 30 June 2018.The UK participation in its preparation was entrusted to Technical Committee MCE/21, Filters for gases and liquids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provi

4、sions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 97749 7ICS 23.120; 91.140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was

5、 published under the authority of the Standards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affected31 March 2017 Supersession details updated to reflect extension of CEN date of withdrawal (DOW)EUROPEAN STANDARD NORME EUROPENNE EUROPISCH

6、E NORM EN ISO 16890-4 December 2016 ICS 91.140.30 Supersedes EN 779:2012English Version Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016) Filtres air de ventilation gnrale - Partie 4: Mthode de conditionnement afi

7、n de dterminer lefficacit spectrale minimum dessai (ISO 16890-4:2016) Luftfilter fr die allgemeine Raumlufttechnik - Teil 4: Konditionierungsverfahren fr die Ermittlung des Fraktionsabscheidegradminimus (ISO 16890-4:2016)This European Standard was approved by CEN on 19 September 2016. CEN members ar

8、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

9、the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Ce

10、ntre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

11、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1

12、000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16890-4:2016 EBS EN ISO 16890-4:2016EN ISO 16890-4:2016 (E) 3 European foreword This document (EN ISO 16890-4:2016) has been prepared by Technical Committee ISO/

13、TC 142 “Cleaning equipment for air and other gases“ in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text

14、 or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for

15、 identifying any or all such patent rights. This document supersedes EN 779:2012. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations o

16、f the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net

17、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16890-4:2016 has been approved by CEN as EN ISO 16890-4:2016 without any modification. BS EN ISO 16890-4:2016ISO 16890-4:2016(E)Foreword ivIn

18、troduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviated terms . 25 General conditioning test requirements . 25.1 General . 25.2 Test device requirements . 25.3 Test device selection 25.4 Conditioning cabinet requirements 36 Conditioning materials 37 Condit

19、ioning cabinet 47.1 General . 47.2 Conditioning cabinet dimensions and construction materials . 47.3 Environment, temperature and relative humidity . 58 Safety issues 69 Test method . 69.1 General . 69.2 Conditioning procedure 710 Qualification 711 Reporting results . 8Annex A (informative) Hints fo

20、r health and safety aspects for the use of IPA . 9Bibliography .11 ISO 2016 All rights reserved iiiContents PageBS EN ISO 16890-4:2016ISO 16890-4:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The wo

21、rk of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governm

22、ental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in th

23、e ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possi

24、bility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of

25、 patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as i

26、nformation about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 142, Cleaning equipment for air and other gases.This first edition of I

27、SO 16890-4, together with ISO 16890-1, ISO 16890-2 and ISO 16890-3, cancels and replaces ISO/TS 21220:2009, which has been technically revised.ISO 16890 consists of the following parts, under the general title Air filters for general ventilation: Part 1: Technical specifications, requirements and cl

28、assification system based upon particulate matter efficiency (ePM) Part 2: Measurement of fractional efficiency and air flow resistance Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured Part 4: Conditioning method to determine the m

29、inimum fractional test efficiencyiv ISO 2016 All rights reservedBS EN ISO 16890-4:2016ISO 16890-4:2016(E)IntroductionThe effects of particulate matter (PM) on human health have been extensively studied in the past decades. The results are that fine dust can be a serious health hazard, contributing t

30、o or even causing respiratory and cardiovascular diseases. Different classes of particulate matter can be defined according to the particle size range. The most important ones are PM10, PM2,5and PM1. The U.S. Environmental Protection Agency (EPA), the World Health Organization (WHO) and the European

31、 Union define PM10as particulate matter which passes through a size-selective inlet with a 50 % efficiency cut-off at 10 m aerodynamic diameter. PM2,5and PM1are similarly defined. However, this definition is not precise if there is no further characterization of the sampling method and the sampling

32、inlet with a clearly defined separation curve. In Europe, the reference method for the sampling and measurement of PM10is described in EN 12341. The measurement principle is based on the collection on a filter of the PM10fraction of ambient particulate matter and the gravimetric mass determination (

33、see EU Council Directive 1999/30/EC of 22 April 1999).As the precise definition of PM10, PM2,5and PM1is quite complex and not simple to measure, public authorities, like the U.S. EPA or the German Federal Environmental Agency (Umweltbundesamt), increasingly use in their publications the more simple

34、denotation of PM10as being the particle size fraction less or equal to 10 m. Since this deviation to the above mentioned complex “official” definition does not have a significant impact on a filter elements particle removal efficiency, the ISO 16890 series refers to this simplified definition of PM1

35、0, PM2,5and PM1.Particulate matter in the context of the ISO 16890 series describes a size fraction of the natural aerosol (liquid and solid particles) suspended in ambient air. The symbol ePMxdescribes the efficiency of an air cleaning device to particles with an optical diameter between 0,3 m and

36、x m. The following particle size ranges are used in the ISO 16890 series for the listed efficiency values.Table 1 Optical particle diameter size ranges for the definition of the efficiencies , ePMxEfficiency Size range, mePM100,3 10ePM2,50,3 2,5ePM10,3 1Air filters for general ventilation are widely

37、 used in heating, ventilation and air-conditioning applications of buildings. In this application, air filters significantly influence the indoor air quality and, hence, the health of people, by reducing the concentration of particulate matter. To enable design engineers and maintenance personnel to

38、 choose the correct filter types, there is an interest from international trade and manufacturing for a well-defined, common method of testing and classifying air filters according to their particle efficiencies, especially with respect to the removal of particulate matter. Current regional standard

39、s are applying totally different testing and classification methods, which do not allow any comparison with each other, and thus hinder global trade with common products. Additionally, the current industry standards have known limitations by generating results which often are far away from filter pe

40、rformance in service, i.e. overstating the particle removal efficiency of many products. With this new ISO 16890 series, a completely new approach for a classification system is adopted, which gives better and more meaningful results compared to the existing standards.The ISO 16890 series describes

41、the equipment, materials, technical specifications, requirements, qualifications and procedures to produce the laboratory performance data and efficiency classification based upon the measured fractional efficiency converted into a particulate matter efficiency (ePM) reporting system.Air filter elem

42、ents according to the ISO 16890 series are evaluated in the laboratory by their ability to remove aerosol particulate expressed as the efficiency values ePM1, ePM2,5and ePM10.The air filter elements can then be classified according to the procedures defined in ISO 16890-1. The particulate removal ef

43、ficiency of the filter element is measured as a function of the particle size in the range of 0,3 m to 10 m of the unloaded and unconditioned filter element as per the procedures defined in ISO 16890-2. After the initial particulate removal efficiency testing, the air filter element is conditioned I

44、SO 2016 All rights reserved vBS EN ISO 16890-4:2016ISO 16890-4:2016(E)according to the procedures defined in this part of ISO 16890 and the particulate removal efficiency is repeated on the conditioned filter element. This is done to provide information about the intensity of any electrostatic remov

45、al mechanism which may or may not be present with the filter element for test. The average efficiency of the filter is determined by calculating the mean between the initial efficiency and the conditioned efficiency for each size range. The average efficiency is used to calculate the ePMxefficiencie

46、s by weighting these values to the standardized and normalized particle size distribution of the related ambient aerosol fraction. When comparing filters tested in accordance with the ISO 16890 series, the fractional efficiency values shall always be compared among the same ePMxclass (ex. ePM1of fil

47、ter A with ePM1of filter B). The test dust capacity and the initial arrestance of a filter element are determined as per the test procedures defined in ISO 16890-3.vi ISO 2016 All rights reservedBS EN ISO 16890-4:2016INTERNATIONAL STANDARD ISO 16890-4:2016(E)Air filters for general ventilation Part

48、4: Conditioning method to determine the minimum fractional test efficiency1 ScopeThis part of ISO 16890 establishes a conditioning method to determine the minimum fractional test efficiency.It is intended for use in conjunction with ISO 16890-1, ISO 16890-2 and ISO 16890-3, and provides the related

49、test requirements for the test device and conditioning cabinet as well as the conditioning procedure to follow.The conditioning method described in this part of ISO 16890 is referring to a test device with a nominal face area of 610 mm 610 mm (24 inch 24 inch).ISO 16890 (all parts) refers to particulate air filter elements for general ventilation having an ePM1efficiency less than or equal to 99 % and an ePM10efficiency greater than 20 % when tested according to the procedures defined within ISO 16890 (all parts).NOTE Th