BS EN ISO 14451-2-2013 Pyrotechnic articles Pyrotechnic articles for vehicles Test methods《点火制品 机动车辆点火制品试验方法》.pdf

《BS EN ISO 14451-2-2013 Pyrotechnic articles Pyrotechnic articles for vehicles Test methods《点火制品 机动车辆点火制品试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 14451-2-2013 Pyrotechnic articles Pyrotechnic articles for vehicles Test methods《点火制品 机动车辆点火制品试验方法》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 14451-2:2013Pyrotechnic articles Pyrotechnic articles for vehiclesPart 2: Test methodsBS EN ISO 14451-2:2013 BRITISH STANDARDNational forewordThis British Standard is t

2、he UK implementation of EN ISO 14451-2:2013.The UK participation in its preparation was entrusted to T e c h n i c a lCommittee CII/47, Pyrotechnic articles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include a

3、ll the necessary provi-sions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013. ISBN 978 0 580 69663 3 ICS 43.040.80 Compliance with a British Standard cannot confer immunity fromlegal obligations.This Br

4、itish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14451-2 March 2013 ICS 43.040.80 English Version Pyrotechnic articles

5、- Pyrotechnic articles for vehicles - Part 2: Test methods (ISO 14451-2:2013) Articles pyrotechniques - Articles pyrotechniques pour vhicules - Partie 2: Mthodes dessai (ISO 14451-2:2013)Pyrotechnische Gegenstnde - Pyrotechnische Gegenstnde fr Fahrzeuge - Teil 2: Prfverfahren (ISO 14451-2:2013) This

6、 European Standard was approved by CEN on 9 February 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen

7、ces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN m

8、ember into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

9、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHE

10、S KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14451-2:2013: EBS EN ISO 14451-2:2013EN ISO 14451-2:2013 (E) 3 Foreword This document (EN ISO 14451-

11、2:2013) has been prepared by Technical Committee CEN/TC 212“Pyrotechnic articles” the secretariat of which is held by NEN, in collaboration with Technical CommitteeISO/TC 22 “Road vehicles“. This European Standard shall be given the status of a national standard, either by publication of an identica

12、ltext or by endorsement, at the latest by September 2013, and conflicting national standards shall bewithdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held re

13、sponsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA,

14、which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Y

15、ugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14451-2:2013

16、 has been approved by CEN as EN ISO 14451-2:2013 without any modification. BS EN ISO 14451-2:2013EN ISO 14451-2:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of EC Directive 2007/23/EC on the placing on the marketof pyrotechnic articles T

17、his European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide one means of conforming to Essential Requirements ofthe New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles. Once this

18、standard is cited in the Official Journal of the European Union under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the normative clauses ofthis standard given in Table ZA.1 confers, within the limits of the scope of this standard, a pres

19、umption ofconformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 2007/23/EC on theplacing on the market of pyrotechnic articles (1 of 2) Clause(s)/sub-clause(s) of this documen

20、t Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remarks/Notes 4.7, 4.8, 4.9 (1) Note: It is taken into account that the intended purpose of the pyrotechnic article is to function in a vehicle in case of accidents 4.1 (2) Reference: Directive 2000/53/EC 4.9 (3) 1st sentence

21、4.9 (3) 2nd and 3rd sentences Note: It is taken into account that the intended purpose of the pyrotechnic article is to function in a vehicle in case of accidents 4.1 (3a) 4.3, 4.4 (3b) 4.2, 4.3, 4.5 (3c) 4.4 (3d) 4.4 (3e) 4.3, 4.4 (3f) 4.5 (3g) 4.1 (3h) See also ISO 14451-3 4.2 (3i) BS EN ISO 14451

22、-2:2013EN ISO 14451-2:2013 (E) 5 Table ZA.1 (2 of 2) Clause(s)/sub-clause(s) of this document Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remarks/Notes 4.1 (3j) 4.2, 4.3, 4.5 (3) Last sentence 4.1 (4a) 4.1 (4b) 4.1, 4.9 (5 B.1) 4.1 (5 B.2) 4.5, 4.6 (5 B.3) (5 B.4) Not app

23、licable 4.7 (5 C.1) 4.5 (5 C.2) 4.5 (5 C.3) (5 C.4) Not applicable (5 C.5) Not applicable 4.1 (5 C.6) 4.5 (5 C.7) WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this part of EN ISO 14451. BS EN ISO 14451-2:2013ISO 14451-2:2013(E) IS

24、O 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Test methods . 14.1 Verification of design and documentation 14.2 Drop test . 24.3 Vibration and temperature test 34.4 Thermal humidity cycling test . 54.5 Electrostatic discharge (E

25、SD) test 64.6 Fire test . 104.7 Igniter test 124.8 Tank test. 124.9 Functioning test 135 Recording 13Annex A (normative) Definition of temperature build-up time, te14Annex B (normative) Probit test (PBBS test) 16Annex C (normative) Bruceton method 22Bibliography .25BS EN ISO 14451-2:2013ISO 14451-2:

26、2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for whi

27、ch a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all m

28、atters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circu

29、lated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsib

30、le for identifying any or all such patent rights.ISO 14451-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 212, Pyrotechnic articles, in collaboration with Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection

31、systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 14451 consists of the following parts, under the general title Pyrotechnic articles Pyrotechnic articles for vehicles: Part 1: Terminology Part 2: Test methods Part 3: Labelling Part 4: Requ

32、irements and categorization for micro gas generators Part 5: Requirements and categorization for airbag gas generators Part 6: Requirements and categorization for airbag modules Part 7: Requirements and categorization for seatbelt pretensioners Part 8: Requirements and categorization for igniters Pa

33、rt 9: Requirements and categorization for actuators Part 10: Requirements and categorization for semi-finished productsiv ISO 2013 All rights reservedBS EN ISO 14451-2:2013INTERNATIONAL STANDARD ISO 14451-2:2013(E)Pyrotechnic articles Pyrotechnic articles for vehicles Part 2: Test methods1 ScopeThis

34、 part of ISO 14451 establishes uniform test methods for pyrotechnic articles for vehicles.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

35、of the referenced document (including any amendments) applies.ISO 14451-1, Pyrotechnic articles Pyrotechnic articles for vehicles Part 1: TerminologyISO 14451-3, Pyrotechnic articles Pyrotechnic articles for vehicles Part 3: LabellingISO 14451-5, Pyrotechnic articles Pyrotechnic articles for vehicle

36、s Part 5: Requirements and categorization for airbag gas generatorsISO 14451-6, Pyrotechnic articles Pyrotechnic articles for vehicles Part 6: Requirements and categorization for airbag modulesISO 14451-7, Pyrotechnic articles Pyrotechnic articles for vehicles Part 7: Requirements and categorization

37、 for seatbelt pretensionersISO 14451-9, Pyrotechnic articles Pyrotechnic articles for vehicles Part 9: Requirements and categorization for actuators3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 14451-1 apply.NOTE Wherever reference is made to pyrote

38、chnic article(s) only pyrotechnic articles for vehicles are meant.4 Test methods4.1 Verification of design and documentationThe manufacturer shall supply a document which describes the pyrotechnic article. The typical content of the document shall include the following information: description of th

39、e purpose of the pyrotechnic article; sketch with external dimensions; total mass of the pyrotechnic article; cross section and part list; mass and pyrotechnic composition(s) contained in the article; ISO 2013 All rights reserved 1BS EN ISO 14451-2:2013ISO 14451-2:2013(E) description of intended beh

40、aviour; description of foreseeable behaviour during fire test if applicable; proposed labelling in accordance with ISO 14451-3; safety data sheet/handling instructions, including electrical characteristics (e.g. all-fire current, no-fire current, resistance, etc.) which shall be provided with the py

41、rotechnic article.This shall be verified by visual inspection by the naked eye.4.2 Drop test4.2.1 PurposeThe purpose of this test is to determine whether the pyrotechnic article experiences any detrimental effect when dropped from a specified height and at specified orientations.4.2.2 EquipmentA ste

42、el impact plate of a minimum of 1 m x 1 m with at least 10 mm thickness, resting on a solid floor, with a fixture that supports the pyrotechnic article at the specified height, shall be used.4.2.3 Test conditionsThe drop height shall be 1002+ ,m.The test shall be done with the pyrotechnic article at

43、 ambient temperature.4.2.4 Test procedureMount one pyrotechnic article into the support fixture at the specified height above the impact plate and oriented such that it will fall in one of the six directions indicated in Figure 1. Disarm the trigger device, if included in the pyrotechnic article.Rel

44、ease the pyrotechnic article, allowing it to free fall onto the impact plate. Repeat the test using the same pyrotechnic article oriented to fall in the opposite direction.Repeat the test twice more, once using a second pyrotechnic article and once using a third pyrotechnic article, each time along

45、one of the remaining directions indicated in Figure 1.2 ISO 2013 All rights reservedBS EN ISO 14451-2:2013ISO 14451-2:2013(E)Figure 1 Definition of main axes4.3 Vibration and temperature test4.3.1 PurposeThe purpose of this test is to determine the ability of the pyrotechnic article to withstand vib

46、ration and temperature conditions. The test may be performed simultaneously or sequentially.4.3.2 EquipmentThe equipment shall consist of a vibration table capable of producing the vibration loads as characterized in Figure 2 and a climatic chamber capable of controlling the temperature during the t

47、est in accordance with Figure 3. In case the test is being performed simultaneously the vibration table shall be mounted within the climatic chamber.4.3.3 Test conditionsThe temperature tolerance shall be 2,5 C.4.3.4 Test procedureFix the pyrotechnic article to the vibration table by an appropriate

48、method insuring correct transmission of the vibration load. Apply random vibration in accordance with Table 1 and Figure 2 along each of the three main axes (see Figure 1) of each pyrotechnic article for 24 h.Place the pyrotechnic article in the climatic chamber. The temperature shall be changed in

49、accordance with Figure 3. It may be changed simultaneously with application of the vibration load. ISO 2013 All rights reserved 3BS EN ISO 14451-2:2013ISO 14451-2:2013(E)Table 1 Frequency characteristics at RMS of 1,34 gFrequencyHzPower spectral densityg2/Hz8 0,03550 0,03580 0,001200 0,000 5KeyX frequency, expressed in hertzY power spectral density, expressed in g2per hertzFigure 2 Vibration testNote to Figure 2: Number of lines: 400; Range of analysis (filter bandwidth 1,25 Hz): 500 Hz; Degree