BS EN ISO 10511-2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)《常用扭矩式六角薄螺母 (带有非金属嵌件)》.pdf

《BS EN ISO 10511-2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)《常用扭矩式六角薄螺母 (带有非金属嵌件)》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 10511-2012 Prevailing torque type hexagon thin nuts (with non-metallic insert)《常用扭矩式六角薄螺母 (带有非金属嵌件)》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10511:2012Prevailing torque type hexagon thin nuts (with non-metallic insert) Copyright European Committee for Standardization Provided by IHS under license with CENNot

2、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10511:2012. It supersedes BS EN ISO 10511:1998 which is withdrawn.The UK participation in its preparation was

3、entrusted to TechnicalCommittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Stan

4、dards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77986 2ICS 21.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Am

5、endments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10511 December 2012 IC

6、S 21.060.20 Supersedes EN ISO 10511:1997English Version Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) crous hexagonaux bas autofreins ( anneau non mtallique) (ISO 10511:2012) Sechskantmuttern mit Klemmteil (mit nichtmetallischem Einsatz), niedrige Form (ISO 105

7、11:2012) This European Standard was approved by CEN on 3 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograp

8、hical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

9、ty of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic o

10、f Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI

11、ON EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10511:2012: ECopyright European Committee for Standardization Provided by IHS under lic

12、ense with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012EN ISO 10511:2012 (E) 3 Foreword This document (EN ISO 10511:2012) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “F

13、asteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Atte

14、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10511:1997. According to the CEN/CENELEC Internal Regulati

15、ons, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

16、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10511:2012 has been approved by CEN as EN ISO 10511:2012 without any modification. Copyright Europ

17、ean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012ISO 10511:2012(E) ISO 2012 All rights reserved iiiContents PageForeword iv1 Scope 12 Normative references . 13 Dimensions . 1

18、4 Requirements and reference International Standards 35 Designation . 3Bibliography . 4Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012ISO 10511:2012(E)Forewo

19、rdISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technica

20、l committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of ele

21、ctrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the

22、member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identi

23、fying any or all such patent rights.ISO 10511 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.This third edition cancels and replaces the second edition (ISO 10511:1997), of which it constitutes a minor revision.iv ISO 2012 All right

24、s reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012INTERNATIONAL STANDARD ISO 10511:2012(E)Prevailing torque type hexagon thin nuts (with non-metallic

25、insert)1 ScopeThis International Standard specifies the characteristics of prevailing torque type hexagon thin nuts (with non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with prope

26、rty classes 04 and 05.NOTE The dimensions of the nuts correspond to those given in ISO 4035 plus prevailing torque feature.If other specifications are required, they can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 and ISO 4759-1.2 N

27、ormative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolts, screws, studs and

28、nuts Symbols and descriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 724, ISO general-purpose metric screw threads Basic dimensionsISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes C

29、oarse thread and fine pitch threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium qualityISO 2320, Prevailing torque type steel nuts Mechanical and performance propertiesISO 3269, Fasteners Acceptan

30、ce inspectionISO 4042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and CISO 6157-2, Fasteners Surface discontinuities Part 2: NutsISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10683, Fa

31、steners Non-electrolytically applied zinc flake coatings3 DimensionsSee Figure 1 and Table 1.Symbols and descriptions of dimensions are specified in ISO 225. ISO 2012 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduc

32、tion or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012ISO 10511:2012(E)aPrevailing torque element; shape at the discretion of the manufacturer.b = 15 to 30.c = 90 to 120.Figure 1Table 1 DimensionsDimensions in millimetresThread DM3 M4 M5 M6 M8 M10 M12 (M14)aM16 M20 M24 M30 M3

33、6Pb0,5 0,7 0,8 1 1,25 1,5 1,75 2 2 2,5 3 3,5 4damax. 3,45 4,60 5,75 6,75 8,75 10,80 13,00 15,10 17,30 21,60 25,90 32,40 38,90min. 3,00 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 24,00 30,00 36,00dwmin. 4,56 5,90 6,90 8,90 11,60 14,60 16,60 19,60 22,50 27,70 33,20 42,80 51,10e min. 6,01 7,66 8

34、,79 11,05 14,38 17,77 20,03 23,35 26,75 32,95 39,55 50,85 60,79hmax. 3,90 5,00 5,00 6,00 6,76 8,56 10,23 11,32 12,42 14,90 17,80 22,20 25,50min. 3,42 4,52 4,52 5,52 6,18 7,98 9,53 10,22 11,32 13,10 16,00 20,10 23,40m min. 1,55 1,95 2,45 2,90 3,70 4,70 5,70 6,42 7,42 9,10 10,90 13,90 16,90mwmin. 1,24

35、 1,56 1,96 2,32 2,96 3,76 4,56 5,14 5,94 7,28 8,72 11,12 13,52smax. 5,50 7,00 8,00 10,00 13,00 16,00 18,00 21,00 24,00 30,00 36,00 46,00 55,00min. 5,32 6,78 7,78 9,78 12,73 15,73 17,73 20,67 23,67 29,16 35,00 45,00 53,80aThe size in parentheses should be avoided if possible.bP is the pitch of the th

36、read.2 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012ISO 10511:2012(E)4 Requirements and reference International StandardsSee Ta

37、ble 2.Table 2 Requirements and reference International StandardsMaterial Nut body SteelInsert For example, polyamideGeneral requirements International Standard ISO 8992Thread Tolerance class 6HInternational Standards ISO 261, ISO 724, ISO 965-2Mechanical and performance propertiesProperty class 04,

38、05International Standards ISO 898-2, ISO 2320ToleranceProduct gradeFor D M16: AFor D M16: BInternational Standard ISO 4759-1Finish CoatingAs processedRequirements for electroplating are specified in ISO 4042.Requirements for non-electrolytically applied zinc flake coatings are specified in ISO 10683

39、.Additional requirements or other finishes or coatings shall be agreed between the supplier and the purchaser.Surface integrity Limits for surface discontinuities are specified in ISO 6157-2.Acceptability Acceptance inspection is specified in ISO 3269.5 DesignationEXAMPLE A prevailing torque type he

40、xagon thin nut, with non-metallic insert, thread M12 and property class 04 is designated as follows:Prevailing torque type hexagon thin nut ISO 10511 - M12 - 04 ISO 2012 All rights reserved 3Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repro

41、duction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012ISO 10511:2012(E)Bibliography1 ISO 4035, Hexagon thin nuts chamfered (style 0) Product grades A and B4 ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENN

42、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 10511:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left

43、blankCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page deliberately left blankCopyright European Committee for Standardization Provided by IHS under license with CENNot f

44、or ResaleNo reproduction or networking permitted without license from IHS-,-,-BSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international l

45、evel. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PAS

46、s are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or amb

47、iguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Memb

48、ers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website additio