BS EN ISO 10432-2005 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment《石油和天然气工业 下降孔设备 地下安全阀设备》.pdf

《BS EN ISO 10432-2005 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment《石油和天然气工业 下降孔设备 地下安全阀设备》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 10432-2005 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment《石油和天然气工业 下降孔设备 地下安全阀设备》.pdf（88页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment The European Standard EN ISO 10432:2004 has the status of a British Standard ICS 75.180.10 BS EN ISO 10432:2004 This British Standard was published under the authority of t

2、he Standards Policy and Strategy Committee on 12 January 2005 BSI 12 January 2005 ISBN 0 580 45211 5 National foreword This British Standard is the official English language version of EN ISO 10432:2004. It is identical with ISO 10432:2004. It supersedes BS EN ISO 10432:1999 which is withdrawn. The

3、UK participation in its preparation was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum, petrochemical and natural gas industries, to Subcommittee PSE/17/-/4, Drilling and production equipment, which has the responsibility to: A list of organizations represented on thi

4、s subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by us

5、ing the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity

6、from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in t

7、he UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, pages 1 to 77 and a back cover. The BSI copyright notice displayed in this document indicates when the document was

8、last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10432 December 2004 ICS 75.180.10 Supersedes EN ISO 10432:1999 English version Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipmen

9、t (ISO 10432:2004) Industries du ptrole et du gaz naturel - Equipement de forage vertical - Vannes de protection de fond de puits (ISO 10432:2004) This European Standard was approved by CEN on 10 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

10、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists

11、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodie

12、s of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR

13、STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10432:2004: EI NESO 01:2342004 (E) 2 Fore

14、word This document (EN ISO 10432:2004) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum and natura

15、l gas industries“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June

16、 2005. This document supersedes EN ISO 10432:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, G

17、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 10432:2004 has been approved by CEN as EN ISO 10432:2004 without any modificatio

18、ns. ENISO10432:2004 Reference number ISO 10432:2004(E) ISO 2004INTERNATIONAL STANDARD ISO 10432 Third edition 2004-12-15 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment Industries du ptrole et du gaz naturel quipement de forage vertical Vannes de protection

19、de fond de puits ENISO10432:2004ISO 10432:2004(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfre

20、p reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee th

21、is PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC eh

22、lar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa O

23、t tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrENISO10432:2004IS:23401 O40

24、02(E) I SO 4002 All irthgs ersedevr iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 3 4 Abbreviated terms. 7 5 Functional specification. 8 5.1 General. 8 5.2 SSSV functional characteristics 8 5.3 Well parameters 9 5.4 Operational parameters 9

25、 5.5 Environmental compatibility 10 5.6 Compatibility with related well equipment .10 6 Technical specification. 10 6.1 Technical requirements 10 6.2 Technical characteristics of SSSV 10 6.3 Design criteria . 11 6.4 Design verification 14 6.5 Design validation 14 6.6 Design changes. 15 6.7 Functiona

26、l test. 15 7 Supplier/manufacturer requirements 16 7.1 General. 16 7.2 Raw material 16 7.3 Heat-treating-equipment qualification 17 7.4 Traceability 17 7.5 Components undergoing special processes . 18 7.6 Quality control. 18 7.7 SSSV functional testing 23 7.8 Product identification . 23 7.9 Document

27、ation and data control. 24 7.10 Failure reporting and analysis. 26 8 Repair/redress . 26 8.1 Repair . 26 8.2 Redress 26 9 Storage and preparation for transport 26 Annex A (normative) Test agency requirements. 27 Annex B (normative) Validation testing requirements . 30 Annex C (normative) Functional

28、testing requirements 40 Annex D (informative) Optional requirement for closure mechanism minimal leakage . 46 Annex E (informative) Operating envelope 47 Annex F (normative) Data requirements, figures/schematics, and tables . 49 Bibliography . 77 ENISO10432:2004IS:23401 O4002(E) iv I SO 4002 All irt

29、hgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject f

30、or which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on

31、 all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees a

32、re circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held

33、responsible for identifying any or all such patent rights. ISO 10432 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling and production equipment. This third edition cancels a

34、nd replaces the second edition (ISO 10432:1999), which has been technically revised. EN4002:23401OSIENISO10432:2004IS:23401 O4002(E) I SO 4002 All irthgs ersedevr vIntroduction This International Standard has been developed by users/purchasers and suppliers/manufacturers of subsurface safety valves

35、intended for use in the petroleum and natural gas industry worldwide. This International Standard is intended to give requirements and information to both parties in the selection, manufacture, testing and use of subsurface safety valves. Furthermore, this International Standard addresses the minimu

36、m requirements with which the supplier/manufacturer is to comply so as to claim conformity with this International Standard. Users of this International Standard should be aware that requirements above those outlined in this International Standard may be needed for individual applications. This Inte

37、rnational Standard is not intended to inhibit a supplier/manufacturer from offering, or the user/purchaser from accepting, alternative equipment or engineering solutions. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the supplier/manufacturer should identify any variations from this International Standard and provide details. The requirements for lock mandrels and landing nipples previously contained in this International Standard are now included in ISO 16070. 4002:23401OSINEENISO10432:2004blank