BS EN ISO 3452-6-2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C《无损检验 渗透测试 温度低于10℃时的渗透测试》.pdf
《BS EN ISO 3452-6-2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C《无损检验 渗透测试 温度低于10℃时的渗透测试》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 3452-6-2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C《无损检验 渗透测试 温度低于10℃时的渗透测试》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、BS EN ISO3452-6:2008ICS 19.100NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDNon-destructive testing Penetrant testingPart 6: Penetrant testing attemperatures lower than 10 degrees C(ISO 3452-6:2008)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/06/2
2、009 03:16, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 28 February2009 BSI 2009ISBN 978 0 580 57160 2Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 3452-6:2008National forewordThis British Stand
3、ard is the UK implementation of EN ISO 3452-6:2008.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/46, Non-destructive testing.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include
4、 all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/06/2009 03:16, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EURO
5、PENNEEUROPISCHE NORMEN ISO 3452-6December 2008ICS 19.100English VersionNon-destructive testing - Penetrant testing - Part 6: Penetranttesting at temperatures lower than 10 degrees C (ISO 3452-6:2008)Essais non destructifs - Examen par ressuage - Partie 6:Examen par ressuage des tempratures infrieure
6、s 10degrs C (ISO 3452-6:2008)Zerstrungsfreie Prfung - Eindringprfung - Teil 6:Eindringprfung bei Temperaturen unter 10 Grad C (ISO3452-6:2008)This European Standard was approved by CEN on 8 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
7、nditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in thre
8、e official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Aust
9、ria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITT
10、EE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 3452-6:2008: ELicensed Copy: Wang Bin,
11、ISO/EXCHANGE CHINA STANDARDS, 04/06/2009 03:16, Uncontrolled Copy, (c) BSIBS EN ISO 3452-6:2008EN ISO 3452-6:2008 (E) 3 Foreword This document (EN ISO 3452-6:2008) has been prepared by Technical Committee CEN/TC 138 “Non-destructive testing“, the secretariat of which is held by AFNOR, in collaborati
12、on with Technical Committee ISO/TC 135 “Non-destructive testing“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by
13、June 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards o
14、rganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal
15、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/06/2009 03:16, Uncontrolled Copy, (c) BSIBS EN ISO 3452-6:2008ISO 3452-6:2008(E) ISO 2008 All rights reserved iiiForeword ISO (the International Organization fo
16、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the
17、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Internati
18、onal Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication
19、as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
20、ISO 34526 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 138, Non-destructive testing, in collaboration with ISO Technical Committee TC 135, Non-destructive testing, Subcommittee SC 2, Surface methods, in accordance with the Agreement on technical coopera
21、tion between ISO and CEN (Vienna Agreement). ISO 3452 consists of the following parts, under the general title Non-destructive testing Penetrant testing: Part 1: General principles Part 2: Testing of penetrant materials Part 3: Reference test blocks Part 4: Equipment Part 5: Penetrant testing at tem
22、peratures higher than 50 C Part 6: Penetrant testing at temperatures lower than 10 C Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/06/2009 03:16, Uncontrolled Copy, (c) BSIBS EN ISO 3452-6:2008ISO 3452-6:2008(E) iv ISO 2008 All rights reservedIntroduction Temperatures lower than 10 C can
23、 affect the properties of penetrant test materials. The use of penetrant materials and the testing of penetrant materials within the temperature range 10 C to 50 C are the subject of EN 571-1 and ISO 3452-2. This part of ISO 3452 addresses materials and their use at lower temperatures than 10 C. Thi
24、s part of ISO 3452 introduces the concept of process times being linked to working temperatures and accordingly users are recommended to ensure that testing products are correctly associated with process parameters in written instructions (procedures). Testing products may be specifically developed
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO345262008NONDESTRUCTIVETESTINGPENETRANTTESTINGPENETRANTTESTINGATTEMPERATURESLOWERTHAN10DEGREESC

链接地址:http://www.mydoc123.com/p-579195.html