BS EN 62317-8-2006 Ferrite cores - Dimensions - Part 8 E-cores《铁氧体磁芯 尺寸 第8部分 E铁芯》.pdf

《BS EN 62317-8-2006 Ferrite cores - Dimensions - Part 8 E-cores《铁氧体磁芯 尺寸 第8部分 E铁芯》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62317-8-2006 Ferrite cores - Dimensions - Part 8 E-cores《铁氧体磁芯 尺寸 第8部分 E铁芯》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 62317-8:2006Ferrite cores Dimensions Part 8: E-coresThe European Standard EN 62317-8:2006 has the status of a British StandardICS 29.100.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g4

2、4g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 62317-8:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007

3、ISBN 978 0 580 49915 9National forewordThis British Standard was published by BSI. It is the UK implementation of EN 62317-8:2006. It is identical with IEC 62317-8:2006. It partially supersedes BS EN 62358:2004. This standard replaces Table A.1 and Table B.1 of BS EN 62358:2004. The UK participation

4、 in its preparation was entrusted to Technical Committee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on EPL/51 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a

5、 contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN S

6、TANDARD EN 62317-8 NORME EUROPENNE EUROPISCHE NORM November 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC -

7、All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62317-8:2006 E ICS 29.100.10 Partly supersedes EN 62358:2004English version Ferrite cores - Dimensions Part 8: E-cores (IEC 62317-8:2006) Noyaux ferrites - Dimensions Partie 8: Noyaux E (CEI 6

8、2317-8:2006) Ferritkerne - Mae Teil 8: E-Kerne (IEC 62317-8:2006) This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan

9、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in two official versions (English and German). A version in any other lang

10、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Est

11、onia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007,

12、Uncontrolled Copy, (c) BSIForeword The text of document 51/864/FDIS, future edition 1 of IEC 62317-8, prepared by IEC TC 51, Magnetic components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62317-8 on 2006-10-01. This standard replaces Table

13、 A.1 and Table B.1 of EN 62358:2004. New rectangular centre leg E-cores, which have been developed in the industry, were introduced in EN 62358, and are in widespread use. This standard has been revised to specify dimensions and effective parameters for these newer rectangular centre leg E-cores. Th

14、e following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-10-01 Annex ZA has

15、 been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62317-8:2006 was approved by CENELEC as a European Standard without any modification. _ 2 EN 62317-8:2006Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSICONTENTS 1 2 3 3

16、.1 3.2 Annex B (normative) An example of a gauge to check the dimensions of E-cores Table 2 Effective parameter and Amin 3 EN 62317-8:2006Scope.4 Normative references .4 Primary standards 4 Dimensions of E-cores with rectangular cross-section .4 Dimensional limits for coil formers.9 Annex A (normati

17、ve) Derived standards.11 meeting the IEC primary standard.12 Figure 1 Dimensions of E-cores with rectangular cross-section5 Figure 2 Main dimensions of coil formers .9 Figure B.1 Gauge dimensions 12 Table 1 Dimensions of E-cores with rectangular cross-section .5 values .7 Table 3 Main dimensions of

18、coil formers 9 Table B.1 Gauge dimensions .13 Annex ZA (normative) Normative references to international publications with their corresponding European publications 15 Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSIFERRITE CORES DIMENSIONS Part 8: E-cores

19、1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for E-cores with rectangular cross-section made of ferrite, the dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving th

20、em. The selecting core sizes to this standard is based on the philosophy of including those sizes, which are industrial standards, either by inclusion in national standards, or by broad-based use in industry. See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be inc

21、luded. NOTE Cores covered by this standard are intended for general applications at both low and high flux densities, but they also find uses in special applications such as pulse transformers. They are generally used in pairs. Whilst the main application of this standard is expected to be for ferri

22、te cores, its validity for iron powder cores should not be overlooked. Coil formers are not specified for E-cores smaller than E 8/2, which are also used in SMD assemblies. The use of “derived” standards, which give a more detailed specification of component parts whilst still permitting compliance

23、with this standard, is discussed in Annex A. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

24、endments) applies. IEC 60205:2006, Calculation of the effective parameters of magnetic piece parts 3 Primary standards Compliance with the following requirements ensures mechanical interchangeability of complete assemblies and coil formers. 3.1 Dimensions of E-cores with rectangular cross-section 3.

25、1.1 Main dimensions The main dimensions of E-cores with rectangular cross-section shall be as given in Table 1. NOTE The dimensions of the cores may be checked by means of gauges, an example of which is given in Annex B. In order to facilitate production it may be necessary to use gauges having dime

26、nsions differing from those given in Annex B, although no relaxation of the requirements for the dimensions of the cores given in Table 1 is thereby permitted. 3.1.2 Effective parameter and Aminvalues The effective parameter and Aminvalues of a pair of cores whose dimensions comply with 3.1.1 shall

27、be as given in Table 2 (see IEC 60205, for the definitions of these parameters and their calculation; and 2.2 of IEC 60205, for the definition of Amin). 4 EN 62317-8:2006Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSIF E A DBCIEC1608/06Figure 1 Dimensionso

28、fE-cores withrectangularcross-sectionTable 1DimensionsofE-coreswithrectangularcross-sectionA mmB mmC mmD mmE mmF mmSizeMin.Max.Min.Max.Min.Max.Min.Max.Min.Max.Min.Max.Old edition IECreferences(IEC61246)Industrial referencesE5,3/2 5,15 5,35 2,57 2,73 1,90 2,00 1,92 2,08 3,80 4,00 1,30 1,40 E5,3/2 FEE

29、5,25 EE5 E6,3/2 6,05 6,30 2,80 2,90 1,90 2,00 1,85 2,05 3,60 3,80 1,30 1,40 E6,3/2 FEE6,18 E8/2 7,85 8,15 3,95 4,05 2,30 2,40 2,85 2,95 5,60 5,80 2,30 2,40 E8/2 FEE8 E8,3/4 8,10 8,60 3,90 4,10 3,40 3,80 2,90 3,10 6,10 6,50 1,60 2,00 FEE8,3 EE8 E8,8/2 8,60 9,40 3,85 4,15 1,78 2,02 2,03 2,40 5,07 5,33

30、 1,78 2,02 E8,8/2 FEE9 E10/3 9,80 10,2 4,88 5,00 2,88 3,00 3,50 3,62 7,00 7,30 2,88 3,00 E10/3 FEE10 E10,2/5 10,0 10,5 5,35 5,65 4,50 4,90 4,05 4,35 7,60 8,00 2,20 2,60 FEE10,2 EE10/11 E13/4 12,2 13,1 6,30 6,50 3,40 3,70 4,50 4,80 8,90 9,50 3,40 3,70 E13/4 FEE12,7AEF12,6 E13/6 12,8 13,2 5,85 6,15 6,

31、00 6,30 4,50 4,70 10,0 10,4 2,60 2,90 EE13 E16/4,8 15,7 16,3 7,00 7,30 4,60 5,00 5,00 5,40 11,7 12,3 3,80 4,20 FEE16AEE16 5 EN 62317-8:2006Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSITable1(continued)A mmB mmC mmD mmE mmF mmSizeMin.Max.Min.Max.Min.Max.M

32、in.Max.Min.Max.Min.Max.Old edition IECreferences(IEC61246)Industrial referencesE16/5 15,5 16,7 7,90 8,20 4,30 4,70 5,70 6,10 11,3 11,9 4,40 4,70 E16/5 FEE16,1 EF16 E19/5 18,6 19,4 7,80 8,20 4,80 5,20 5,40 5,80 14,2 14,8 4,30 4,70 FEE19AEE19 E19,3/4,8 18,97 19,61 7,92 8,28 4,63 4,88 5,59 5,84 14,05 1

33、4,7 4,67 4,83 EE-187 EE19/16 E20/6 19,4 20,8 9,80 10,2 5,40 5,90 7,00 7,40 14,1 14,7 5,50 5,90 E20/6 FEE20,1 EF20 E25/7 24,3 25,8 12,3 12,8 6,90 7,50 8,70 9,20 17,5 18,3 7,00 7,50 E25/7 FEE25,1 EF25 E25,4/6 24,9 25,9 9,30 9,70 6,05 6,65 6,20 6,60 18,6 19,4 6,05 6,65 FEE25,4AE25,4/6,3 24,9 25,9 9,27

34、9,65 6,10 6,48 6,22 6,60 18,55 19,81 6,10 6,60 EE24/25 EE25/19 E30/11 29,5 30,6 12,9 13,5 10,4 11,0 7,90 8,50 19,5 20,5 10,4 11,0 FEE30AEE30 E32/9 31,3 32,9 15,8 16,4 8,80 9,50 11,2 11,8 22,7 23,7 8,90 9,50 E32/9 FEE32,1 EF32 E33/13 32,5 33,9 13,5 14,1 12,4 13,0 9,00 9,60 23,1 24,1 9,40 10,0 FEE33AE

35、E33 E34,6/9 33,9 35,3 13,9 14,64 8,90 9,72 9,51 10,05 25,0 26,2 9,10 9,70 EE375 EE35/28BE35/10 34,5 35,7 15,2 15,8 9,70 10,3 9,20 9,80 24,5 25,5 9,70 10,3 FEE35AEE35 E40/11 39,5 40,7 16,7 17,3 10,4 11,0 10,0 10,6 27,5 28,5 9,70 11,0 FEE40AEE40 E41/13 40,27 41,87 16,38 17,18 12,19 12,95 10,08 10,68 2

36、8,55 29,59 12,19 13,1 EE21 EE41/33C E42/15 41,3 43,0 20,8 21,2 14,7 15,2 14,8 15,5 29,5 30,7 11,7 12,2 E42/15 FEE42AE42/20 41,3 43,0 20,8 21,2 19,2 20,0 14,8 15,5 29,5 30,7 11,7 12,2 E42/20 FEE42BE47/16 46,1 47,88 19,4 19,83 15,35 15,87 12,07 12,5 31,72 32,56 15,35 15,87 EE625 EE47/39 E50/15 49,3 51

37、,0 21,0 21,6 14,2 15,0 12,5 13,1 34,3 35,7 14,2 15,0 EE50AEE50 E55/21 54,1 56,2 27,2 27,8 20,4 21,0 18,5 19,3 37,5 38,7 16,7 17,2 E55/21 FEE55,2AE55/25 54,1 56,2 27,2 27,8 24,2 25,0 18,5 19,3 37,5 38,7 16,7 17,2 E55/25 FEE55,2BE60/16 59,2 61,1 22,0 22,6 15,2 16,0 13,7 14,0 43,7 45,3 15,2 16,0 FEE60A

38、EE60 E65/27 63,8 66,5 32,2 32,8 26,6 27,4 22,2 23,0 44,2 45,7 19,3 20,0 E65/27 FEE65,2 6 EN 62317-8:2006Licensed Copy: Wang Bin, na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSITable2 Effective parameter andAminvaluesSizeaC1mm1C2mm3lemmAemm2Vemm3Aminbmm2Old edition IECreferences(IE

39、C61246)Industrial referencesE5,3/2 4,850 4 1,863 0 12,6 2,60 32,9 2,54 BE6,3/2 3,764 6 1,148 7 12,3 3,28 40,4 2,63 C E6,3/2 FEE6,18 E8/2 3,439 7 0,639 76 18,5 5,38 99,4 5,17 BE8/2 FEE8 E8,3/4 2,800 3 0,401 68 19,5 6,97 136 6,48 C FEE8,3 EE8 E8,8/2 3,154 0 0,635 22 15,7 4,97 77,8 3,61 C E8,8/2 FEE9 E

40、10/3 2,726 6 0,324 93 22,9 8,4 192 8,11 BE10/3 FEE10 E10,2/5 2,250 3 0,193 83 26,1 11,6 303 11,3 C FEE10,2 EE10/11 E13/4 2,394 6 0,192 77 29,7 12,4 369 12,2 L E13/4 FEE12,7AEF12,6 E13/6 1,766 3 0,103 21 30,2 17,1 517 16,9 C EE13 E16/4,8 1,837 9 9,651 2 10235,0 19,0 667 18,7 BFEE16AEE16 E16/5 1,872 4

41、 9,333 3 10237,6 20,1 754 19,4 BE16/5 FEE16,1 EF16 E19/5 1,726 4 7,512 0 10239,7 23,0 912 22,5 C FEE19AEE19 E19,3/4,8 1,751 0 7,661 8 10240,0 22,9 914 22,6 C EE-187 EE19/16 E20/6 1,447 3 4,516 8 10246,4 32,0 1 490 31,6 BE20/6 FEE20,1 EF20 E25/7 1,114 2 2,149 5 10257,8 51,8 2 990 51,5 L E25/7 FEE25,1

42、 EF25 E25,4/6 1,198 6 2,984 8 10248,1 40,2 1 930 39,4 BFEE25,4AE25,4/6,3 1,232 8 3,153 8 10274,2 39,1 1 880 38,4 BEE24/25 EE25/19 E30/11 0,529 47 4,828 8 10358,1 110 6 370 107 BFEE30AEE30 E32/9 0,893 64 10,746 10374,3 83,2 6 180 81,4 L E32/9 FEE32,1 EF32 E33/13 0,548 84 4,585 3 10365,7 120 7 860 114

43、 BFEE33AEE33 E34,6/9 0,819 44 9,651 6 10369,5 84,9 5 910 83,6 BEE375 EE35/28BE35/10 0,660 20 6,229 0 10370,0 106 7 420 100 C FEE35AEE35 E40/11 0,606 50 4,749 4 10377,5 128 9 890 114 C FEE40AEE40 E41/13 0,495 37 3,161 1 10377,6 157 12 200 151 L EE21 EE41/33C 7 EN 62317-8:2006Licensed Copy: Wang Bin,

44、na, Tue Mar 27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSITable2(continued)SizeaC1mm1C2mm3lemmAemm2Vemm3Aminbmm2Old edition IECreferences(IEC61246)Industrial referencesE42/15 0,546 63 3,069 3 10397,4 178 17 300 175 BE42/15 FEE42AE42/20 0,416 95 1,785 7 10397,4 233 22 700 229 BE42/20 FEE42BE4

45、7/16 0,379 69 1,618 1 10389,1 235 20 900 229 BEE625 EE47/39 E50/15 0,425 62 1,880 2 10396,3 226 21 800 213 C EE50AEE50 E55/21 0,350 12 9,917 4 104124 353 43 600 350 C E55/21 FEE55,2AE55/25 0,294 62 7,022 1 104124 420 51 900 417 C E55/25 FEE55,2BE60/16 0,441 67 17,708 104110 249 27 300 243 C FEE60AEE

46、60 E65/27 0,273 57 5,095 4 104147 537 78 900 530 C E65/27 FEE65,2 aThe core size designation containsa combination oftwo numbers;the firstone indicatesthe length Aofthe core and thesecond one itsthicknessC(see Table 1).bSee 2.2 ofIEC 60205 for definition ofAmin. Thelettersafter theAminvaluesgive the

47、 location ofAmin:C iscentre leg,L isouter leg,Bisbackwall.NOTE1 The manufacturersmay indicate in their cataloguesmore precise valuesthan those given in Table 2.NOTE2 The above valueshave been calculated using the method given in 3.4 ofIEC 60205. 8 EN 62317-8:2006Licensed Copy: Wang Bin, na, Tue Mar

48、27 03:22:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3.2Dimensionallimitsfor coilformers Thedimensional limitsforcoilformers suitableforusewitha pairofE-cores ofsizegreaterthanE8/2 shallbeasgiven inTable 3.efs1k c s2l2IEC1609/06Figure2Maindimensionsof coilformersTable3 Maindimensionsofcoilformers c

49、 mme mmf mmk mml2mms1mms2mmSizeMin.Max.Min.Min.Max.Min.Min.Old edition IECreferences(IEC61246)Industrial referencesE8/2 2,55 5,40 2,55 5,40 5,50 0,35 0,4 E8/2 FEE8 E8,3/4 3,95 5,90 2,15 5,90 5,60 0,35 0,4 FEE8,3 EE8 E8,8/2 2,17 4,87 2,17 4,87 3,86 0,35 0,4 E8,8/2 FEE9 E10/3 3,15 6,80 3,15 6,80 6,80 0,4 0,4 E10/3 FEE10 E10,2/5 5,05 7,40 2,75 7,40 7,90 0,4 0,5 FEE10,2 EE10/11 E13/4 3,90 8,70 3,90 8,70 8,80 0,5 0,5 E13/4 FEE12,7AEF12,6 E13/6 6,45 9,80 3,05 9,80 8,