BS EN 62317-7-2005 Ferrite cores - Dimensions - Part 7 EER-cores《铁氧体磁心 尺寸 EER型磁芯》.pdf

《BS EN 62317-7-2005 Ferrite cores - Dimensions - Part 7 EER-cores《铁氧体磁心 尺寸 EER型磁芯》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62317-7-2005 Ferrite cores - Dimensions - Part 7 EER-cores《铁氧体磁心 尺寸 EER型磁芯》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 62317-7:2005Ferrite cores Dimensions Part 7: EER-cores The European Standard EN 62317-7:2005 has the status of a British StandardICS 29.100.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g4

2、8g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIBS EN 62317-7:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 25 January 2006 BSI 25 Janu

3、ary 2006ISBN 0 580 47305 8National forewordThis British Standard is the official English language version of EN 62317-7:2005. It is identical with IEC 62317-7:2005.The UK participation in its preparation was entrusted to Technical Committee EPL/51, Transformers, inductors, magnetic components and fe

4、rrite materials, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalo

5、gue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corre

6、ct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed

7、; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates

8、when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62317-7 NORME EUROPENNE EUROPISCHE NORM November 2005 CENELEC European Committee for Electrotechnical S

9、tandardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62317-

10、7:2005 E ICS 29.100.10 English version Ferrite cores Dimensions Part 7: EER-cores (IEC 62317-7:2005) Noyaux ferrites Dimensions Partie 7: Noyaux EER (CEI 62317-7:2005) Ferritkerne Mae Teil 7: EER-Kerne (IEC 62317-7:2005) This European Standard was approved by CENELEC on 2005-10-01. CENELEC members a

11、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to

12、 the Central Secretariat or to any CENELEC member. This European Standard exists in two official versions (English, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same sta

13、tus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, S

14、lovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEN 62317-7:2005 Foreword The text of document 51/834/FDIS, edition 1 of IEC 62317-7, prepared by IEC TC 51, Magnetic components and ferrite materials

15、, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62317-7 on 2005-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-07-01 latest dat

16、e by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-10-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62317-7:2005 was approved by CENELEC as a European Standard without any modification. _ 2 Licensed Copy:

17、 Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEN 62317-7:2005 CONTENTS 1 Scope 5 2 Normative references .5 3 Primary standards 5 3.1 Dimensions of EER-cores 5 3.2 Dimensional limits for coil formers5 Annex A (normative) Derived standards .8 Annex B (normative) Example of a s

18、tandard for gauges to check the dimensions of EER-cores meeting this primary standard9 Figure 1 Dimensions of EER-cores.6 Figure 2 Essential dimensions of coil formers .7 Figure B.1 Gauge dimensions 9 Table 1 Dimensions of EER-cores 6 Table 2 Effective parameter values of EER-cores .6 Table 3 Essent

19、ial dimensions of coil formers 7 Table B.1 Gauge dimensions .9 Annex ZA (normative) Normative references to international publications with their corresponding European publications .10 3 Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEN 62317-7:2005 4 INTRODUCT

20、ION New round centre pole E-cores, which have been developed in the industry, were introduced in IEC 62358, and are in widespread use. This part of IEC 62317 has been developed to specify dimensions and effective parameters for these newer round centre pole E-cores. This standard replaces Table A.2

21、and Table B.2 in IEC 62358:2004. Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSI 5 EN 62317-7:2005 FERRITE CORES DIMENSIONS Part 7: EER-cores 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for a p

22、referred range of EER-cores made of ferrite, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculations involving them. 2 Normative references The following referenced documents are indispensable for the application of this document.

23、For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60205:2001, Calculation of the effective parameters of magnetic piece parts IEC 62358:2004, Ferrite cores Standard inductance factor (AL

24、) and its tolerance 3 Primary standards Compliance with the following requirements ensures mechanical interchangeability of complete assemblies and coil formers. 3.1 Dimensions of EER-cores 3.1.1 Principal dimensions The principal dimensions of EER-cores are given in Table 1. The dimensions of the c

25、ores may be checked by means of gauges. By way of example, a possible standard for these gauges is given in Annex B. In order to facilitate production, it may be necessary to use gauges having dimensions differing from those given in Annex B, although no relaxation of the requirements for the dimens

26、ions of the cores given in Table 1 is permitted. The dimensions specified in Table 1 are illustrated in Figure 1. 3.1.2 Effective parameter and Aminvalues The effective parameter values of a pair of cores whose dimensions comply with 3.1.1 shall be as given in Table 2. 3.2 Dimensional limits for coi

27、l formers The essential dimensions of coil formers suitable for use with a pair of EER-cores shall be as given in Table 3. The dimensions specified in Table 3 are illustrated in Figure 2. Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEN 62317-7:2005 6 Figure 1

28、Dimensions of EER-cores Table 1 Dimensions of EER-cores A mm B mm C mm D mm E mm F mm Size Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. EER25,5 24,9 26,1 9,05 9,55 7,25 7,75 5,95 6,45 19,7 20,9 7,25 7,75 EER28 27,9 29,1 13,7 14,3 11,1 11,7 9,3 9,9 21,1 22,3 9,6 10,2 EER28L 27,9 29,1 1

29、6,6 17,2 11,1 11,7 12,2 12,8 21,1 22,3 9,6 10,2 EER35A 34,2 35,8 20,4 21,0 11,0 11,6 14,4 15,0 25,3 26,9 11,0 11,6 EER39 38,2 39,8 21,8 22,6 12,5 13,1 16,6 17,4 28,4 30,0 12,5 13,1 EER40 39,5 40,5 22,2 22,6 13,05 13,55 15,1 15,7 29,0 30,8 13,05 13,55 EER42 41,1 42,9 20,8 21,6 14,8 15,6 14,9 15,7 29,

30、2 31,0 14,8 15,6 EER49 47,9 50,1 30,8 31,6 16,8 17,6 22,3 23,1 36,0 38,2 16,8 17,6 Table 2 Effective parameter values of EER-cores Size C1 mm1C2 mm3le mm Ae mm2Vemm3Amina)mm2EER25,5 1,070 0 2,408 7 10247,5 44,4 2 110 42,5 EER28 0,728 16 0,843 36 10262,9 86,4 5 430 77,0 EER28L 0,868 36 1,013 8 10274,

31、4 85,7 6 370 77,0 EER35 0,815 66 0,738 15 10290,1 111 9 960 100 EER39 0,762 91 0,573 84 102101 133 13 500 129 EER40 0,643 21 0,424 31 10297,5 152 14 800 139 EER42 0,510 64 0,272 52 10295,7 187 17 900 179 EER49 0,557 95 0,231 33 102134 241 32 400 228 a)See 2.2 of IEC 60205 for the definition of Amin.

32、 NOTE 1 The manufacturers may indicate in their catalogues more precise values than those given in Table 2. NOTE 2 The above values have been calculated using the method given in 3.5 of IEC 60205. A F E B C D IEC 1485/05 Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (

33、c) BSI 7 EN 62317-7:2005 h1d3d1IEC 1486/05Figure 2 Essential dimensions of coil formers Table 3 Essential dimensions of coil formers d1d3 h1 mm mm mm Size Max. Min. Max. EER 25,5 19,3 8,0 11,7 EER 28 20,7 10,4 18,4 EER 28L 20,7 10,4 24,2 EER 35 24,9 11,8 28,6 EER 39 27,9 13,3 33,0 EER 40 28,5 13,8 3

34、0,0 EER 42 28,6 15,8 29,6 EER 49 35,4 17,9 44,3 Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIEN 62317-7:2005 8 Annex A (normative) Derived standards Clauses 1 to 3 of this part of IEC 62317 establish the values for the principal dimensions of core assemblies a

35、nd coil formers and enable full interchangeability for components complying with this primary standard to be achieved. Parties interested in making or using EER-cores may find it desirable to lay down local standards for everyday use, which show the dimensions and tolerances in greater detail than C

36、lause 3, and which correspond to the state of the art in that area. These specifications are known as “derived standards”. When doing so, care should be taken not to exclude any other type of EER-core meeting this part of IEC 62317, which would also satisfy the performance specification valid for a

37、specific case. It should be noted that even if a component complies with a derived standard and with the requirements of Clause 3 of this primary standard, therefore permitting core assemblies and coil formers to be freely interchanged, its constituent parts may not necessarily be interchangeable. W

38、hen requirements lead to the establishment of a national standard, the relevant national standardization body is strongly requested to insert a note in such a national standard stating that: a) it is in accordance with the dimensional requirement of this part of IEC 62317 but that more details are g

39、iven in order to promote its practical use; b) other solutions are possible within the framework of this part of IEC 62317 and should not be excluded if the resulting core and coil formers are functionally interchangeable with those of the national standard. Licensed Copy: Wang Bin, na, Tue Apr 25 0

40、2:05:05 BST 2006, Uncontrolled Copy, (c) BSI 9 EN 62317-7:2005 Annex B (normative) Example of a standard for gauges to check the dimensions of EER-cores meeting this primary standard B.1 General The gauges shall be in accordance with Table B.1 and its associated Figure B.1. Figure B.1 Gauge dimensio

41、ns Table B.1 Gauge dimensions a mm b mm c mm d mm e mm f mm Size Min. Max. Min. Max. Min. Min. Min. Max. Min. Max. EER 25,5 26,105 26,115 5,95 5,96 14,0 7,0 19,685 19,695 7,755 7,765 EER 28 29,105 29,115 9,30 9,31 18,0 11,0 21,085 21,095 10,205 10,215 EER 28L 29,105 29,115 12,2 12,3 18,0 14,0 21,085

42、 21,095 12,805 12,815 EER 35 35,805 35,815 14,4 14,5 18,0 16,0 25,285 25,295 11,605 11,615 EER 39 39,805 39,815 16,6 16,7 20,0 18,0 28,385 28,395 13,105 13,115 EER 40 40,505 40,515 15,1 15,2 20,0 17,0 28,985 28,995 13,555 13,565 EER 42 42,905 42,915 14,9 15,0 22,0 17,0 29,185 29,195 15,605 15,615 EE

43、R 49 50,105 50,115 22,3 22,4 24,0 24,0 35,985 35,995 17,605 17,615 B.2 Procedure and requirements To check the winding space, the gauge shall be fully inserted into the core without forcing; when fully inserted, the gauge shall meet the mating surface of the outer legs of core under test. _ d c b a

44、efIEC 1487/05 Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSI10 EN 62317-7:2005 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the ap

45、plication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relev

46、ant EN/HD applies. Publication Year Title EN/HD Year IEC 60205 2001 Calculation of the effective parameters of magnetic piece parts EN 60205 2001 IEC 62358 2004 Ferrite cores - Standard inductance factor (AL) and its tolerance EN 62358 2004 Licensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006,

47、Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Tue Apr 25 02:05:05 BST 2006, Uncontrolled Copy, (c) BSIBS EN 62317-7:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents th

48、e UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to impro

49、ve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive