BS EN 62317-13-2015 Ferrite cores Dimensions PQ-cores for use in power supply applications《铁氧体磁心 尺寸规格 第13部分 电源设施用PQ磁芯》.pdf

《BS EN 62317-13-2015 Ferrite cores Dimensions PQ-cores for use in power supply applications《铁氧体磁心 尺寸规格 第13部分 电源设施用PQ磁芯》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62317-13-2015 Ferrite cores Dimensions PQ-cores for use in power supply applications《铁氧体磁心 尺寸规格 第13部分 电源设施用PQ磁芯》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFerrite cores DimensionsPart 13: PQ-cores for use in power supply applicationsBS EN 62317-13:2015National forewordThis British Standard is the UK implementation of EN 62317-13:2015. It isidentical to IEC 62317-13:2015. It supersedes BS EN 62317-13:2008 which iswithdrawn.The

2、UK participation in its preparation was entrusted to TechnicalCommittee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the nec

3、essary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 86153 6ICS 29.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard wa

4、s published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62317-13:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62317-13 December 2015 ICS 29.100.10 Supersedes EN

5、 62317-13:2008 English Version Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications (IEC 62317-13:2015) Noyaux ferrites - Dimensions - Partie 13: Noyaux PQ utiliss dans des applications dalimentation lectrique (IEC 62317-13:2015) Ferritkerne - Mae - Teil 13: PQ-Kerne f

6、r den Einsatz in Netzteilen (IEC 62317-13:2015) This European Standard was approved by CENELEC on 2015-09-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any a

7、lteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other langu

8、age made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the

9、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

10、 Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means res

11、erved worldwide for CENELEC Members. Ref. No. EN 62317-13:2015 E BS EN 62317-13:2015EN 62317-13:2015 2 European foreword The text of document 51/1095/FDIS, future edition 2 of IEC 62317-13, prepared by IEC/TC 51 “Magnetic components and ferrite materials“ was submitted to the IEC-CENELEC parallel vo

12、te and approved by CENELEC as EN 62317-13:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-24 latest date by which the national standards conflicting with th

13、e document have to be withdrawn (dow) 2018-09-24 This document supersedes EN 62317-13:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent ri

14、ghts. Endorsement notice The text of the International Standard IEC 62317-13:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60205:2006 NOTE Harmonized as EN

15、 60205:2006 (not modified). IEC 62317-1 NOTE Harmonized as EN 62317-1. BS EN 62317-13:2015 2 IEC 62317-13:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Primary standards . 5 3.1 General . 5 3.2 Dimensions of PQ-cores . 5 3.2.1 Principal dimensions 5 3.2.2 Effective paramet

16、er and Aminvalues . 5 3.3 Dimensions limits for coil formers 6 3.4 Pin locations and base outlines . 6 3.5 Pin diameter . 6 4 Mounting . 6 Annex A (informative) PQ-core design . 12 Annex B (informative) An example of gauge to check the dimensions of PQ-cores . 13 B.1 General . 13 B.2 Procedure and r

17、equirements . 13 Bibliography 14 Figure 1 Dimensions of PQ-cores . 6 Figure 2 Dimensions of low-profile PQI-cores 8 Figure 3 Main dimensions of coil formers for PQ-cores 10 Figure 4 Pin locations and base outlines viewed from the upper side of the board . 11 Figure B.1 Gauge dimensions 13 Table 1 Di

18、mensions of PQ-cores 7 Table 2 Dimensions of low-profile PQI-cores 8 Table 3 Effective parameter and Aminvalues for PQ-cores 9 Table 4 Effective parameter and Aminvalues for low-profile PQI-cores 9 Table 5 Main dimensions of coil formers for PQ-cores 10 Table B.1 Gauge dimensions . 13 BS EN 62317-13

19、:2015IEC 62317-13:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FERRITE CORES DIMENSIONS Part 13: PQ-cores for use in power supply applications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electr

20、otechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifica

21、tions, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internationa

22、l, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal dec

23、isions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for inte

24、rnational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In o

25、rder to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be c

26、learly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certificatio

27、n bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, pr

28、operty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited i

29、n this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying a

30、ny or all such patent rights. International Standard IEC 62317-13 has been prepared by technical committee 51: Magnetic components and ferrite materials. This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision. This edition includes

31、 the following significant technical changes with respect to the previous edition: a) addition of three core sizes (PQ 65/54, PQ 78/39 and PQ 107/87) in Table 1, b) addition of effective parameter and Aminvalues, of main dimensions of coil formers and of gauge dimensions for PQ-cores for PQ 65/54, P

32、Q 78/39 and PQ 107/87. BS EN 62317-13:2015 4 IEC 62317-13:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 51/1095/FDIS 51/1104/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the

33、 above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62317 series, under the general title Ferrite cores Dimensions, can be found on the IEC website. The committee has decided that the contents of this publication will rema

34、in unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62317-13:2015IEC 62317-13:2015 IEC 2015 5

35、FERRITE CORES DIMENSIONS Part 13: PQ-cores for use in power supply applications 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of PQ-cores and low-profile PQI-cores made of ferrite, and the locations of their ter

36、minal pins on a 2,54 mm printed wiring grid in relation to the base outlines of the cores. The selection of core sizes for this standard is based on the philosophy of including those sizes which are industrial standards, either by inclusion in a national standard, or by broad-based use in industry.

37、NOTE See IEC 62317-1 for more detail concerning the philosophy of selecting core sizes to be included. The general considerations that the design of this range of cores is based upon are given in Annex A. 2 Normative references The following documents, in whole or in part, are normatively referenced

38、 in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Void. 3 Primary standards 3.1 General Compliance with the following requirement

39、s ensures mechanical interchangeability of complete assemblies and wound coil formers. 3.2 Dimensions of PQ-cores 3.2.1 Principal dimensions The principal dimensions of PQ-cores shall be as given in Table 1 and those of the low-profile PQ-cores shall be as given in Table 2. See also Figure 1 and Fig

40、ure 2. The dimensions of the cores may be checked by means of gauges. By way of example, a possible standard for these gauges is given in Annex B, although no relaxation of the requirements for the dimensions of the cores given in Table 1 and in Table 2 is permitted. 3.2.2 Effective parameter and Am

41、invalues The effective parameter values for cores having the dimensions given in 3.2.1 are as shown in Table 3 and Table 4. BS EN 62317-13:2015 6 IEC 62317-13:2015 IEC 2015 3.3 Dimensions limits for coil formers The essential dimensions of coil formers suitable for use with a pair of PQ-cores shall

42、be as given in Table 5. See also Figure 3. 3.4 Pin locations and base outlines These shall be as shown in Figure 4. 3.5 Pin diameter Coil former terminations (pins) shall be accepted by a gauge having 1,2 mm holes on a true position. 4 Mounting Due to their sizes and respective weights, it is recomm

43、ended that the cores above PQ 35/35 (including PQ 35/35) be fixed on the printed board with mounting assemblies at two opposite sides of their coil formers. Concerning low-profile PQ-cores, no mounting assemblies are defined. It is recommended that the two cores be fixed by glue or adhesive tape. Fi

44、gure 1 Dimensions of PQ-cores IEC JL AX X GC EFB D BS EN 62317-13:2015IEC 62317-13:2015 IEC 2015 7 Table 1 Dimensions of PQ-cores Size A B C D E F G J L mm mm mm mm mm mm mm mm mm PQ 20/16 Min. 20,10 8,00 13,60 5,.00 17,60 8,60 12,00 Nom. 4,80 10,50 Max. 20,90 8,20 14,40 5,30 18,40 9,00 13,00 PQ 20/

45、20 Min. 20,10 10,00 13,60 7,00 17,60 8,60 12,00 Nom. 4,80 10,50 Max. 20,90 10,20 14,40 7,30 18,40 9,00 13,00 PQ 26/20 Min. 26,05 9,95 18,55 5,60 22,05 11,80 15,50 Nom. 7,30 13,90 Max. 26,95 10,20 19,45 5,90 22,95 12,20 16,50 PQ 26/25 Min. 26,05 12,25 18,55 7,90 22,05 11,80 15,50 Nom. 7,30 13,90 Max.

46、 26,95 12,50 19,45 8,20 22,95 12,20 16,50 PQ 32/20 Min. 31,50 10,15 21,50 5,60 27,00 13,20 19,00 Nom. 6,20 15,10 Max. 32,50 10,40 22,50 5,90 28,00 13,70 20,00 PQ 32/30 Min. 31,50 15,05 21,50 10,50 27,00 13,20 19,00 Nom. 6,20 15,10 Max. 32,50 15,30 22,50 10,80 28,00 13,70 20,00 PQ 35/35 Min. 34,50 17

47、,25 25,50 12,35 31,50 14,10 23,50 Nom. 7,30 16,40 Max. 35,70 17,50 26,50 12,65 32,50 14,60 24,50 PQ 40/40 Min. 39,70 19,75 27,40 14,60 36,40 14,60 28,00 Nom. 7,75 16,80 Max. 41,30 20,00 28,60 14,90 37,60 15,20 29,00 PQ 50/50 Min. 49,00 24,85 31,50 17,90 43,30 19,65 31,50 Nom. 10,00 22,00 Max. 51,00

48、25,10 32,50 18,20 44,70 20,35 32,50 PQ 65/54 Min. 63,70 26,80 39,20 17,75 52,00 25,55 39,20 Nom. 12,00 27,50 Max. 66,30 27,20 40,80 18,25 54,00 26,45 40,80 PQ 78/39 Min. 77,00 19,45 41,20 12,60 69,10 25,00 60,10 Nom. 13,60 27,60 Max. 80,00 19,95 42,80 13,20 71,90 26,00 62,50 PQ 107/87 Min. 105,00 43

49、,10 68,50 27,50 93,70 40,20 72,50 Nom. 22,80 43,70 Max. 109,00 43,90 71,50 28,50 97,30 41,80 75,30 BS EN 62317-13:2015 8 IEC 62317-13:2015 IEC 2015 Figure 2 Dimensions of low-profile PQI-cores Table 2 Dimensions of low-profile PQI-cores Size A B1B2C D E F G J L mm mm mm mm mm mm mm mm mm mm PQI 16/7,8 Min. 16,10 5,30 2,25 10,90 2,90 14,10 6,80 9,60 Nom. 3,90 8,40 Max. 16,70 5,50 2,45 11,50 3,20 14,7