BS EN 62317-11-2016 Ferrite cores Dimensions EC-cores for use in power supply applications《铁氧体磁芯 尺寸 在电源应用中使用的EC磁芯》.pdf

《BS EN 62317-11-2016 Ferrite cores Dimensions EC-cores for use in power supply applications《铁氧体磁芯 尺寸 在电源应用中使用的EC磁芯》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62317-11-2016 Ferrite cores Dimensions EC-cores for use in power supply applications《铁氧体磁芯 尺寸 在电源应用中使用的EC磁芯》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFerrite cores DimensionsPart 11: EC-cores for use in power supply applicationsBS EN 62317-11:2016National forewordThis British Standard is the UK implementation of EN 62317-11:2016. It isidentical to IEC 62317-11:2015. The UK participation in its preparation was entrusted to

2、 TechnicalCommittee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsibl

3、e for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86202 1ICS 29.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Poli

4、cy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62317-11:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62317-11 February 2016 ICS 29.100.10 English Version Ferrite cores - Dimensions - Part 11: EC-cores for u

5、se in power supply applications (IEC 62317-11:2015) Noyaux ferrites - Dimensions - Partie 11: Noyaux EC utiliss dans des applications dalimentation lectrique (IEC 62317-11:2015) Ferritkerne - Mae - Teil 11: EC-Kerne fr den Einsatz in Netzteilen (IEC 62317-11:2015) This European Standard was approved

6、 by CENELEC on 2015-12-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

7、 standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own l

8、anguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F

9、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de

10、Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62317-11:2016 E BS EN 62317-11:201

11、6EN 62317-11:2016 2 European foreword The text of document 51/1077/CDV, future edition 1 of IEC 62317-11, prepared by IEC/TC 51 “Magnetic components and ferrite materials“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62317-11:2016. The following dates are fixed: lates

12、t date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-23 Attention is drawn to the possibili

13、ty that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62317-11:2015 was approved by CENELEC as a European Standar

14、d without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60205:2006 NOTE Harmonized as EN 60205:2006. BS EN 62317-11:2016 2 IEC 62317-11:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative refe

15、rences 6 3 Primary standards . 6 3.1 General . 6 3.2 Dimensions of EC-cores 6 3.2.1 Principal dimensions 6 3.2.2 Effective parameter and Aminvalues . 63.3 Main dimensions for coil formers . 9 Annex A (normative) Example of standard coil formers 10 Annex B (normative) Calculation of the effective par

16、ameters of EC-cores 13 Bibliography 15 Figure 1 Principal dimensions of EC-cores . 7 Figure 2 Main dimensions of coil formers for EC-cores. 9 Figure A.1 Main dimensions of coil formers for EC35, EC41, EC52, EC70 cores 10 Figure A.2 Main dimensions of coil formers for EC90 core . 11 Figure B.1 Pair o

17、f EC cores . 13 Table 1 Principal dimensions of EC-cores 8 Table 2 Effective parameter and Aminvalues . 8 Table 3 Main dimensions of coil formers for EC-cores 9 Table A.1 Main dimensions of coil formers (examples of Figure A.1 and A.2) for EC-cores 12 BS EN 62317-11:2016IEC 62317-11:2015 IEC 2015 3

18、INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FERRITE CORES DIMENSIONS Part 11: EC-cores for use in power supply applications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nationa

19、l Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly

20、 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-government

21、al organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tec

22、hnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by

23、IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unif

24、ormity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)

25、 IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensu

26、re that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of a

27、ny nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the ref

28、erenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Inte

29、rnational Standard IEC 62317-11 has been prepared by IEC technical committee 51: Magnetic components and ferrite materials. This first edition cancels and replaces the first edition of IEC 60647 published in 1979. This edition constitutes a technical revision. This edition includes the following sig

30、nificant technical changes with respect to the first edition of IEC 60647: a) addition of EC90 and EC120 cores in Table 1, b) addition of effective parameter and Aminvalues and main dimensions of coil formers for EC90 and EC120 cores. BS EN 62317-11:2016 4 IEC 62317-11:2015 IEC 2015 The text of this

31、 standard is based on the following documents: CDV Report on voting 51/1077/CDV 51/1083/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives,

32、 Part 2. A list of all parts in the IEC 62317 series, published under the general title Ferrite cores Dimensions, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/

33、webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62317-11:2016IEC 62317-11:2015 IEC 2015 5 INTRODUCTION IEC 62317 consists of the following parts, under the general title F

34、errite cores Dimensions: Part 1: General specification Part 2: Pot-cores for use in telecommunications, power supply, and filter applications Part 3: Dimensions of half pot-cores made of ferrite for inductive proximity switches1Part 4: RM-cores and associated parts Part 5: EP-cores and associated pa

35、rts for use in inductors and transformers Part 6: ETD-cores for use in power supplies Part 7: EER-cores Part 8: E-cores Part 9: Planar cores Part 10: PM-cores made of magnetic oxides and associated parts Dimensions2Part 11: EC-cores for use in power supply applications Part 12: Dimensions of uncoate

36、d ring cores of magnetic oxides3 1Under consideration, currently available as IEC 62323. 2Under consideration, currently available as IEC 61247. 3Under consideration, currently available as IEC 61604. BS EN 62317-11:2016 6 IEC 62317-11:2015 IEC 2015 FERRITE CORES DIMENSIONS Part 11: EC-cores for use

37、 in power supply applications 1 Scope This part of IEC 62317 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of EC-cores, the essential dimensions of coil formers to be used with them, and the effective parameter values to be used in calculatio

38、ns involving them. The selection of core sizes for this standard is based on the philosophy of including those sizes which are industrial standards, either by inclusion in national standards, or by broad-based use in industry. See 62317-1 for more detail concerning the philosophy of selecting core s

39、izes to be included. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

40、 (including any amendments) applies. Void. 3 Primary standards 3.1 General Compliance with the following requirements ensures mechanical interchangeability of complete assemblies and wound coil formers. 3.2 Dimensions of EC-cores 3.2.1 Principal dimensions The principal dimensions of EC-cores shall

41、be as given in Figure 1 and Table 1. 3.2.2 Effective parameter and Aminvalues The effective parameter values of a pair of cores having the dimensions given in 3.2.1 are as shown in Table 2. Aminis specified in IEC 60205:2006, 2.2. BS EN 62317-11:2016IEC 62317-11:2015 IEC 2015 7 Figure 1 Principal di

42、mensions of EC-cores r r B D TEC s FAIEC BS EN 62317-11:2016 8 IEC 62317-11:2015 IEC 2015 Table1 PrincipaldimensionsofEC-coresSizeA B C D E F r s T mmmmmmmmmmmmmmmmmmMin.Max.Min.Max.Min.Max.Min.Max.Min.Max.Min.Max.Max.Min.Max.Min.Max.EC 3533,735,317,1517,459,29,811,912,622,223,39,29,80,5 2,53,027,72

43、9,3EC 4139,641,619,3519,6511,311,913,514,326,327,811,311,90,73,03,332,634,6EC 5250,953,524,0524,3513,0513,7515,516,332,133,913,0513,750,83,54,042,745,3EC 7068,371,734,3534,6516,016,822,323,243,345,716,016,81,04,55,057,961,3EC 9088,291,844,3545,6529,031,035,036,068,571,529,031,01,05,25,877,280,8EC120

44、118,0122,049,8551,1529,031,035,036,093,396,729,031,01,55,25,8111,0107,0Table2 Effective parameterandAminvaluesSizeC1C2leAeVeAminmm-1mm-3mmmm2mm3mm2EC 350,9014110,61810-376,584,96 50070,9EC 410,718975,8640 10-388,212310 800106EC 520,571923,1676 10-310318118600141EC 700,508591,818 610-314228039800211E

45、C 900,342500,5477010-3215629135000570EC1200,324960,4210010-3251772194000707NOTEThe manufacturerscanindicate in theircataloguesmore precise valuesthan those given in Table 2. BS EN 62317-11:2016IEC 62317-11:2015 IEC 2015 9 3.3 Main dimensions for coil formers The main dimensions of coil formers suita

46、ble for use with a pair of EC-cores shall be as given in Figure 2 and Table 3. Figure 2 Main dimensions of coil formers for EC-cores Table 3 Main dimensions of coil formers for EC-cores Sized1d2d3h1h2mm mm mm mm mm Max. Max. Min. Max. Min. EC 35 21,8 12,3 9,9 23,6 21,4 EC 41 25,8 14,4 12,0 26,8 24,4

47、 EC 52 31,6 16,3 13,85 30,7 28,2 EC 70 42,7 19,6 17,0 44,3 41,3 EC 90 67,7 35,6 31,4 69,6 64,8 EC 120 92,4 35,6 31,4 69,6 64,8 h2 h1d3d2d1IEC BS EN 62317-11:2016 10 IEC 62317-11:2015 IEC 2015 Annex A (normative)Example of standard coil formersExamples of standard coil formers for EC35, EC41, EC52 an

48、d EC70 cores are shown in Figure A.1 and for EC90 core are shown in Figure A.2 and in Table A.1. Figure A.1 Main dimensions of coil formers for EC35, EC41, EC52, EC70 cores C G FEH3H4H1D2D3D1H2IEC G G BS EN 62317-11:2016IEC 62317-11:2015 IEC 2015 11 Figure A.2 Main dimensions of coil formers for EC9

49、0 core C H2D1 D3D2H1H4FEIEC BS EN 62317-11:2016 12 IEC 62317-11:2015 IEC 2015 TableA.1 Maindimensionsof coilformers(examplesofFigureA.1 andA.2)forEC-coresReferenceEC35EC41EC52EC70EC90UnitMin.NomMax.Min.NomMax.Min.NomMax.Min.NomMax.Min.NomMax.C28,428,828,428,843,644,056,356,779,580,5mmD121,321,825,525,831,331,642,442,766,367,7mmD212,112,314,214,416,116,319,4 19,634,835,6mmD39,910,112,012,213,8514,0517,017,331,431.8mmE32,4